Issue 8, 2016

Design of an MWW zeolite catalyst for linear alkylbenzene synthesis with improved catalytic stability

Abstract

The effect of micro–meso hierarchical porosity on the catalytic performance of MWW zeolites during linear alkylbenzene (LAB) synthesis was studied. The catalytic active sites of the MWW zeolite during LAB synthesis are identified as the acid sites located on the external surface cage (EC-12) and the internal supercage (C10-12). The catalytic stability of MCM-22 obtained from the optimum preparation protocol could be improved by increasing the number of EC-12 cages as well as increasing the Smeso and pore volume. The catalytic activity of ITQ-2 by delamination for LAB synthesis is mainly attributed to the acid site located at surface cage EC-12. The ITQ-2 sample subjected to the optimum delamination procedure exhibited very strong stability even in benzene lean LAB feed or 0.1% octadiene-containing LAB feed. Alternatively, the pillared MCM-36 zeolite increases the C10-12 supercage and mesoporous surface area, enabling MCM-36 to catalyse a lower LAB product selectivity with formation of more di-alkylate by-products with a similar LAB isomer selectivity.

Graphical abstract: Design of an MWW zeolite catalyst for linear alkylbenzene synthesis with improved catalytic stability

Article information

Article type
Paper
Submitted
18 दिसम्बर 2015
Accepted
02 फरवरी 2016
First published
02 फरवरी 2016

Catal. Sci. Technol., 2016,6, 2715-2724

Design of an MWW zeolite catalyst for linear alkylbenzene synthesis with improved catalytic stability

H. Yen, J. Wang, S. Siao, S. H. Cha, S. B. Hong, S. S. Al-Khattaf, I. Wang and T. Tsai, Catal. Sci. Technol., 2016, 6, 2715 DOI: 10.1039/C5CY02208H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements