Issue 2, 2008

Zinc oxide nanonail based chemical sensor for hydrazine detection

Abstract

Using ZnO nanonails, a hydrazine electrochemical sensor has been fabricated, for the first time, which showed a high and reproducible sensitivity of 8.56 µA cm–2 µM–1 with a response time less than 5 s, a linear range from 0.1 to 1.2 µM and a correlation coefficient of R = 0.999. The limit of detection (LOD), based on the S/N ratio, was estimated to be 0.2 µM.

Graphical abstract: Zinc oxide nanonail based chemical sensor for hydrazine detection

Supplementary files

Article information

Article type
Communication
Submitted
23 जुलाई 2007
Accepted
28 सितम्बर 2007
First published
17 अक्तूबर 2007

Chem. Commun., 2008, 166-168

Zinc oxide nanonail based chemical sensor for hydrazine detection

A. Umar, M. M. Rahman, S. H. Kim and Y. Hahn, Chem. Commun., 2008, 166 DOI: 10.1039/B711215G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements