A facile coprecipitation approach for synthesizing LaNi0.5Co0.5O3 as the cathode for a molten-salt lithium–oxygen battery

Qianyuan Qiu; Jiaqi Wang; Penghui Yao; Yongdan Li

doi:10.1039/D3FD00078H

A facile coprecipitation approach for synthesizing LaNi_0.5Co_0.5O₃ as the cathode for a molten-salt lithium–oxygen battery†

Qianyuan Qiu,

^a Jiaqi Wang,^ab Penghui Yao^a and Yongdan Li

*^a

Author affiliations

* Corresponding authors

^a Department of Chemical and Metallurgical Engineering, Aalto University, Kemistintie 1, FI-00076 Aalto, Finland
E-mail: yongdan.li@aalto.fi

^b Flexible Printed Electronic Technology Center and State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Shenzhen 518055, China

Abstract

The cathode of a lithium–oxygen battery (LOB) should be well designed to deliver high catalytic activity and long stability, and to provide sufficient space for accommodating the discharge product. Herein, a facile coprecipitation approach is employed to synthesize LaNi_0.5Co_0.5O₃ (LNCO) perovskite oxide with a low annealing temperature. The assembled LOB exhibits superior electrochemical performance with a low charge overpotential of 0.03–0.05 V in the current density range of 0.1–0.5 mA cm⁻². The battery ran stably for 119 cycles at a high coulombic efficiency. The superior performance is ascribed to (i) the high catalytic activity of LNCO towards oxygen reduction/evolution reactions; (ii) the increased temperature enabling fast kinetics; and (iii) the LiNO₃–KNO₃ molten salt enhancing the stability of the LOB operating at high temperature.

This article is part of the themed collection: Rechargeable non-aqueous metal-oxygen batteries

Supplementary files

Article information

DOI: https://doi.org/10.1039/D3FD00078H
Article type: Paper
Submitted: 19 अप्रैल 2023
Accepted: 19 जून 2023
First published: 19 जून 2023
This article is Open Access

Download Citation

Faraday Discuss., 2024,248, 327-340

Permissions

Request permissions

A facile coprecipitation approach for synthesizing LaNi_0.5Co_0.5O₃ as the cathode for a molten-salt lithium–oxygen battery

Q. Qiu, J. Wang, P. Yao and Y. Li, Faraday Discuss., 2024, 248, 327 DOI: 10.1039/D3FD00078H

This article is licensed under a Creative Commons Attribution 3.0 Unported Licence. You can use material from this article in other publications without requesting further permissions from the RSC, provided that the correct acknowledgement is given.

Faraday Discussions