Issue 39, 2023

On the quantification of hydrogen in lithium metal oxides

Abstract

Hydrogen incorporation during crystal growth or other treatment has attracted research interest for a long time, but inconsistent literature data exist about the bulk hydrogen concentration in the lithium metal oxides LiMO3 with M = Nb and Ta. Hydrogen binds to oxygen and forms hydroxyl groups (OH), which can be easily detected optically by FT-IR spectroscopy. However, this method cannot determine an absolute hydrogen concentration. With a reliably characterised concentration reference, a calibration for the fast and non-destructive FT-IR spectroscopy could be obtained. In this study, the hydrogen contents of as-grown and hydrogen-doped congruent and near-stoichiometric LiMO3 crystals were investigated by elastic recoil detection analysis (ERDA), carrier gas hot extraction (CGHE), 1H magic angle spinning nuclear magnetic resonance (1H MAS NMR) and hydrogen microscopy via proton–proton (p–p) scattering. However, not every method is suitable for the investigation of hydrogen in the LiMO3 host lattices. Based on p–p scattering, the A/cH calibration factors for FT-IR spectroscopy can be specified with (4.52 ± 0.58) × 10−17 cm and (6.46 ± 0.96) × 10−17 cm for LiNbO3 and LiTaO3, respectively.

Graphical abstract: On the quantification of hydrogen in lithium metal oxides

  • This article is part of the themed collection: #MyFirstJMCA

Supplementary files

Article information

Article type
Paper
Submitted
05 जून 2023
Accepted
01 सितम्बर 2023
First published
20 सितम्बर 2023

J. Mater. Chem. A, 2023,11, 21183-21202

On the quantification of hydrogen in lithium metal oxides

T. Köhler, P. Reichart, E. Brendler, A. Vyalikh, A. Klostermeier, Z. Siketić, E. Mehner, G. Dollinger, H. Stöcker and D. C. Meyer, J. Mater. Chem. A, 2023, 11, 21183 DOI: 10.1039/D3TA03317A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements