Issue 16, 2023

Ni/Co in and on CeO2: a comparative study on the dry reforming reaction

Abstract

Mono metal (Ni, Co)-substituted (in) and supported (on) CeO2 catalysts were prepared by using solution combustion synthesis and formaldehyde reduction methods. The catalysts were completely characterized by both bulk and surface techniques. Both supported and substituted catalysts show distinct differences in the dry reforming of methane (DRM) activity. Co-substituted CeO2 showed the highest stability under the DRM reaction conditions at 800 °C. Detailed kinetic investigations were also carried out to estimate the apparent activation energy. Carbon deposition on the spent catalysts was investigated by thermal gravimetric analysis (TGA) and TEM which shows that the deactivation is due to the presence of amorphous and graphitic carbon. Transient studies on a mass spectrometer indicate that the prominence of the reaction CO2 + C → 2CO is responsible for the catalyst's stability. Surface lattice oxygen reactivity is a vital factor in catalytic stability and its action decides the reaction steps. DFT further verifies that the energy of vacancy formation is significantly lower in Co-substituted CeO2 as compared to Ni-substituted CeO2. This confirms that the Co-substituted catalyst favors oxidation due to higher availability of surface oxygen, while in contrast Ni hinders oxidation by decreasing the availability of surface oxygen for the reaction.

Graphical abstract: Ni/Co in and on CeO2: a comparative study on the dry reforming reaction

Supplementary files

Article information

Article type
Paper
Submitted
17 मई 2023
Accepted
03 जुलाई 2023
First published
12 जुलाई 2023

Sustainable Energy Fuels, 2023,7, 3853-3870

Ni/Co in and on CeO2: a comparative study on the dry reforming reaction

P. K. Yadav, K. Patrikar, A. Mondal and S. Sharma, Sustainable Energy Fuels, 2023, 7, 3853 DOI: 10.1039/D3SE00649B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements