Issue 11, 2023

Resolving isobaric interference in the determination of Nd isotopes using laser ionisation mass spectrometry towards atom percent fission measurements

Abstract

In the nuclear industry, burn-up is one of the crucial parameters used to monitor the fuel performance. One of the major drawbacks of conventional methods for burn-up determination is prior chemical separation of the burn-up monitor, e.g. neodymium (Nd) from samarium (Sm), to overcome isobaric interference or abundance correction using non-interfering isotopes. The present study demonstrates the potential application of the Laser Ionisation Mass Spectrometry (LIMS) technique for the quantitative estimation of Nd isotopes without prior chemical separation and abundance correction. By tuning laser parameters, the isobaric interference is discriminated in situ by LIMS. This study shows that LIMS can be a potential alternative technique to determine the atom percentage (at%) fission or burn-up of nuclear reactor fuel with an accuracy and precision better than 6% and 5%, respectively. The present study is the first of its kind to our knowledge to resolve the isobaric interference of the burn-up monitor Nd from Sm by using LIMS. This study discusses the findings of optimised laser parameters, the calibration plot, the correlation coefficient, the limit of detection (LOD), relative standard deviation (RSD), and accuracy for quantifying Nd isotopes using LIMS.

Graphical abstract: Resolving isobaric interference in the determination of Nd isotopes using laser ionisation mass spectrometry towards atom percent fission measurements

Article information

Article type
Paper
Submitted
27 मार्च 2023
Accepted
12 सितम्बर 2023
First published
13 सितम्बर 2023

J. Anal. At. Spectrom., 2023,38, 2324-2331

Resolving isobaric interference in the determination of Nd isotopes using laser ionisation mass spectrometry towards atom percent fission measurements

N. Janardhanan, U. K. Maity, M. Joseph, P. Manoravi and N. Sivaraman, J. Anal. At. Spectrom., 2023, 38, 2324 DOI: 10.1039/D3JA00102D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements