Issue 21, 2022

Electrochemiluminescence biosensor for cardiac troponin I with signal amplification based on a MoS2@Cu2O–Ag-modified electrode and Ce:ZnO-NGQDs

Abstract

Cardiac troponin I (cTnI) is one of the structural subunits of cardiac troponin complexes and a significant biomarker of acute myocardial infarction (AMI). Therefore, a sensitive detection of cTnI in the early stages is of great significance. Here, a sensitive sandwiched electrochemiluminescence (ECL) immunosensor was built for the detection of cTnI, where molybdenum disulfide@cuprous oxide–silver nanoparticles (MoS2@Cu2O–Ag) immobilized cTnI the capture antibody (Ab1), and cerium-doped zinc oxide@nitrogen-doped graphene quantum dots (Ce:ZnO@NGQDs) loaded the signal antibody (Ab2). The MoS2@Cu2O–Ag nanoparticles not only indicated excellent electroconductivity and biocompatibility but also provided a large specific surface. Ce:ZnO as a co-reaction accelerator can convert the Ce4+ ↔ Ce3+ reaction and might increase the rate of electron exchange to accomplish signal enhancement. Under optimum conditions, the sensor possessed a wide linear range from 10 pg mL−1 to 100 ng mL−1, and the LOD was 2.90 fg mL−1 (S/N = 3). In addition, the sensor plays a good role in serum detection, indicating that it has potential for application in the detection of biomolecules.

Graphical abstract: Electrochemiluminescence biosensor for cardiac troponin I with signal amplification based on a MoS2@Cu2O–Ag-modified electrode and Ce:ZnO-NGQDs

Supplementary files

Article information

Article type
Paper
Submitted
15 अगस्त 2022
Accepted
12 सितम्बर 2022
First published
13 सितम्बर 2022

Analyst, 2022,147, 4768-4776

Electrochemiluminescence biosensor for cardiac troponin I with signal amplification based on a MoS2@Cu2O–Ag-modified electrode and Ce:ZnO-NGQDs

B. Wang, C. Wang, Y. Li, X. Liu, D. Wu and Q. Wei, Analyst, 2022, 147, 4768 DOI: 10.1039/D2AN01341J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements