Issue 7, 2021

Lithium isotopic composition of reference materials of biological origin TORT-2, DORM-2, TORT-3, DORM-4, SRM-1400 and ERM-CE278k

Abstract

This study reports Li concentrations and Li isotope compositions of soft tissues and bones from six international reference materials of biological origin, i.e., lobster hepatopancreas (TORT-2 and TORT-3), dogfish muscle (DORM-2 and DORM-4), mussel tissue (ERM-CE278k), and bone ash (SRM-1400). An in-house standard of plankton material (PLK-VLFR) has also been characterized. The seven materials display Li concentrations ranging from 0.05 μg g−1 DW (for DORM-2) to 10.5 μg g−1 DW (for PLK-VLFR). The Li purification technique used for Li isotope analyses is classical, with AG-50-X12 resin. Using the MC-ICP-MS Neptune Plus for Li isotope ratio measurements, the average δ7Li values, based on 3 to 9 replicates for each material, are 30.98 ± 0.47‰, 19.28 ± 4.90‰, 22.64 ± 2.81‰, 29.17 ± 0.24‰, 24.17 ± 0.32‰, 14.69 ± 0.35‰, and −1.72 ± 0.48‰ for PLK-VLFR, DORM-2, TORT-2, DORM-4, TORT-3, ERM-CE278k, and SRM-1400 respectively. The long-term analytical reproducibility (∼1 year) is estimated at ±0.18‰ (2SD) based on 20 replicate analyses of the pure reference solution Li7-N above 2 ng mL−1. It decreases at ±2.5‰ when the solutions are measured below 0.5 ng mL−1. For the reference materials of biological origin studied here, the Li isotope ratio uncertainties always remain below ±0.5‰ (2SD) when the Li amount loaded on the column is above 2 ng. However, it increases exponentially below this limit (up to ±2.4‰ for 1 ng Li). For the material with the lowest Li concentrations, DORM-2, a standard addition method was employed to precisely measure Li isotope ratios and to better assess the corresponding accuracy and reproducibility. This method leads to a much better precision (2SD = 1.1‰ vs. 4.9‰). Overall, this study characterizes the Li isotope composition of materials of biological origin and advises to consider a lower precision when discussing δ7Li values of low Li materials measured without standard addition.

Graphical abstract: Lithium isotopic composition of reference materials of biological origin TORT-2, DORM-2, TORT-3, DORM-4, SRM-1400 and ERM-CE278k

Supplementary files

Article information

Article type
Paper
Submitted
05 फरवरी 2021
Accepted
09 जून 2021
First published
28 जून 2021

J. Anal. At. Spectrom., 2021,36, 1381-1388

Lithium isotopic composition of reference materials of biological origin TORT-2, DORM-2, TORT-3, DORM-4, SRM-1400 and ERM-CE278k

F. Thibon, L. Weppe, M. Montanes, P. Telouk and N. Vigier, J. Anal. At. Spectrom., 2021, 36, 1381 DOI: 10.1039/D1JA00045D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements