Issue 2, 2020

Three-terminal III–V/Si tandem solar cells enabled by a transparent conductive adhesive

Abstract

Tandem or multijunction solar cells are able to convert sunlight to electricity with greater efficiency than single junction solar cells by splitting the solar spectrum across sub-cells with different bandgaps. With the efficiencies of many common single-junction solar cell materials leveling off near their theoretical efficiency limits, there is renewed interest in applying this approach. However, there is ongoing debate as to the best approach for interconnecting sub-cells in series, or whether it is preferable to operate them independently. In this paper, we provide the first experimental demonstration of a tandem cell architecture with three terminals: one on top of the tandem cell, and two beneath it, in interdigitated back contact configuration. The two cells are interconnected with a transparent conductive adhesive, which is compatible with rough surfaces and exhibits negligible series resistance. Combining GaInP and Si sub-cells in this manner allows us to achieve a GaInP/Si tandem cell with a two-terminal efficiency of 26.4 ± 1.0%. We then show that utilizing all three terminals results in an efficiency boost of 0.9 ± 0.2%, to an efficiency of 27.3 ± 1.0%, and discuss the operation of the cell and its two interacting circuits.

Graphical abstract: Three-terminal III–V/Si tandem solar cells enabled by a transparent conductive adhesive

Supplementary files

Article information

Article type
Paper
Submitted
08 अगस्त 2019
Accepted
23 अक्तूबर 2019
First published
04 नवम्बर 2019

Sustainable Energy Fuels, 2020,4, 549-558

Author version available

Three-terminal III–V/Si tandem solar cells enabled by a transparent conductive adhesive

M. Schnabel, H. Schulte-Huxel, M. Rienäcker, E. L. Warren, P. F. Ndione, B. Nemeth, T. R. Klein, M. F. A. M. van Hest, J. F. Geisz, R. Peibst, P. Stradins and A. C. Tamboli, Sustainable Energy Fuels, 2020, 4, 549 DOI: 10.1039/C9SE00893D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements