Issue 3, 2020

Sensitive field-effect transistor sensors with atomically thin black phosphorus nanosheets

Abstract

Atomically thin black phosphorus (BP) field-effect transistors have excellent potential for sensing applications. However, commercial scaling of PFET sensors is still in the early stage due to various technical challenges, such as tedious fabrication, low response% caused by rapid oxidation, non-ideal response output (spike/bidirectional), and large device variation due to poor control over layer thickness among devices. Attempts have been made to address these issues. First, a theoretical model for response% dependence on the number of layers is developed to show the role of atomically thin BP for better responses. A position-tracked, selected-area-exfoliation method has been developed to rapidly produce thin BP layers with a narrow distribution (∼1–7 layers), which can harness excellent gate control over the PFET channel. The typical current on/off ratio is in the range of ∼300–500. The cysteine-modified Al2O3-gated PFET sensors show high responses (∼30–900%) toward a wide detection range (∼1–400 ppb) of lead ions in water with a typical response time of ∼10–30 s. A strategy to minimize device variation is proposed by correlating PFETs’ on/off ratio with sensitivity parameters. The thickness variation of the gate oxide is investigated to explain non-ideal and ideal response transient kinetics.

Graphical abstract: Sensitive field-effect transistor sensors with atomically thin black phosphorus nanosheets

Supplementary files

Article information

Article type
Paper
Submitted
03 नवम्बर 2019
Accepted
01 दिसम्बर 2019
First published
02 दिसम्बर 2019

Nanoscale, 2020,12, 1500-1512

Author version available

Sensitive field-effect transistor sensors with atomically thin black phosphorus nanosheets

A. Maity, X. Sui, H. Pu, K. J. Bottum, B. Jin, J. Chang, G. Zhou, G. Lu and J. Chen, Nanoscale, 2020, 12, 1500 DOI: 10.1039/C9NR09354K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements