Issue 14, 2020

Synthesis and characterization of novel zinc precursors for ZnO thin film deposition by atomic layer deposition

Abstract

A novel series of zinc complexes, [EtZn(dab)]2 (1), [EtZn(damb)]2 (2), [EtZn(damp)]2 (3), and [EtZn(dadb)]2 (4), were prepared via single-step substitution. Further, these were analyzed by nuclear magnetic resonance (NMR), Fourier transform infrared spectroscopy (FT-IR), elemental analysis, single crystal X-ray diffraction analysis, and thermogravimetric analysis (TGA). The X-ray crystallography analysis revealed that all complexes exist as dimeric structures with distorted tetrahedral geometry having zinc centers that are interconnected via μ2-O bonding of the aminoalkoxy oxygen atom. TGA and thermal analysis of the complexes showed high volatilities and stabilities at sublimation temperatures of 70, 95, 90, and 105 °C at 0.5 Torr for the respective compounds. Precursor 3 was successfully used for ZnO thin film deposition by ALD. A growth rate per cycle (GPC) of 0.125 nm per cycle was obtained at 200 °C and XPS analysis confirmed the growth of highly pure ZnO films without carbon and nitrogen impurities, while XRD analysis revealed the deposition of reasonably crystalline films. Additionally, the high transmittance and wide bandgap of the films are suitable for optoelectronic applications.

Graphical abstract: Synthesis and characterization of novel zinc precursors for ZnO thin film deposition by atomic layer deposition

Supplementary files

Article information

Article type
Paper
Submitted
05 दिसम्बर 2019
Accepted
05 मार्च 2020
First published
06 मार्च 2020

Dalton Trans., 2020,49, 4306-4314

Synthesis and characterization of novel zinc precursors for ZnO thin film deposition by atomic layer deposition

S. H. Han, R. E. Agbenyeke, G. Y. Lee, B. K. Park, C. G. Kim, Y. K. Lee, S. U. Son and T. Chung, Dalton Trans., 2020, 49, 4306 DOI: 10.1039/C9DT04644E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements