Issue 48, 2019

Tuning the electrical conductivity of amorphous carbon/reduced graphene oxide wrapped-Co3O4 ternary nanofibers for highly sensitive chemical sensors

Abstract

The electrical conductivity of amorphous carbon/reduced graphene oxide(rGO)-wrapped Co3O4 nanofibers prepared by the electrospinning process is for the first time finely tuned creatively by the thermal-etching process during which the amorphous carbon is removed and the further growth of Co3O4 nanocrystals within amorphous carbon occurs through thermal oxidation. The influence of electrical conductivity on the room-temperature ammonia sensing properties of these ternary composite material based sensors can thus be investigated for the first time. The fabricated chemiresistive-type sensor using the ternary sample thermally oxidized at 390 °C in a controlled O2 environment shows a good sensitivity and fast response (∼20 s: 50 ppm) to different concentrations of ammonia from 1–100 ppm at room temperature. The sensor demonstrates an excellent selectivity to several possible interferents such as methanol, ethanol, formaldehyde, methylbenzene, benzene, acetone and water and a brilliant long-term stability for about four years. Density functional theory (DFT) calculations are performed to study the coupling effect at the interface of graphene/Co3O4 (110B) which plays a crucial role in the sensing performance to NH3. The underlying chemical sensing process is examined using in situ Fourier transform infrared spectroscopy (FTIR) which shows a water-mediated catalytic oxidation transducing mechanism.

Graphical abstract: Tuning the electrical conductivity of amorphous carbon/reduced graphene oxide wrapped-Co3O4 ternary nanofibers for highly sensitive chemical sensors

Supplementary files

Article information

Article type
Paper
Submitted
20 अक्तूबर 2019
Accepted
10 नवम्बर 2019
First published
14 नवम्बर 2019

J. Mater. Chem. A, 2019,7, 27522-27534

Tuning the electrical conductivity of amorphous carbon/reduced graphene oxide wrapped-Co3O4 ternary nanofibers for highly sensitive chemical sensors

Q. Feng, Y. Zeng, P. Xu, S. Lin, C. Feng, X. Li and J. Wang, J. Mater. Chem. A, 2019, 7, 27522 DOI: 10.1039/C9TA11550A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements