Issue 41, 2019

Boron-nitride/carbon-nanotube hybrid aerogels as multifunctional desulfurisation agents

Abstract

Boron nitride particles were hybridised with electrically-conducting carbon nanotube aerogels to produce electrically-heatable sorbents for commercially-important adsorptive desulfurisation applications. Specifically, carbon-doped boron nitride structures (BN) were embedded within carbon nanotube (rCNT) aerogels by freeze-drying of aqueous BN-precursor/CNT mixtures followed by high-temperature thermal treatment. The resulting BN/rCNT aerogels showed considerably enhanced desulfurisation performance compared to pure BN powders, as evidenced by a 50% increase in organosulfur uptake (up to 43 mg S per g BN) and dramatically improved sorbent regeneration stability (90% performance retention after 5 regeneration cycles). The improved desulfurisation performance was linked to substantially increased meso-porosity and improved boron–sulfur interactions in the hybrid BN/rCNT hybrid aerogels as characterised via electron microscopy, BET, EDX mapping and post-sorption XPS. Importantly, the conductivity of the CNT scaffold enabled resistive heating of BN to very high temperatures (up to 700 °C) at low energy inputs and at very high heating rates (up to 74 °C s−1). The utility of resistive scaffold heating was demonstrated for energy-efficient thermal regeneration of exhausted BN/rCNT adsorbents over multiple regeneration cycles. The study demonstrates the essential advantages of hybridising BN with 3D nanocarbon networks, enhancing existing functional BN properties (sorption capacity, regeneration stability) while also introducing additional new functions (direct electrical framework heating). These findings therefore have clear implications for a wide range of BN applications, including water treatment, carbon capture, energy storage and electro-catalysis.

Graphical abstract: Boron-nitride/carbon-nanotube hybrid aerogels as multifunctional desulfurisation agents

Supplementary files

Article information

Article type
Paper
Submitted
19 जून 2019
Accepted
09 सितम्बर 2019
First published
12 सितम्बर 2019

J. Mater. Chem. A, 2019,7, 24027-24037

Boron-nitride/carbon-nanotube hybrid aerogels as multifunctional desulfurisation agents

D. Xia, H. Li, P. Huang, J. Mannering, U. Zafar, D. Baker and R. Menzel, J. Mater. Chem. A, 2019, 7, 24027 DOI: 10.1039/C9TA06599G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements