Issue 1, 2019

Membrane-less photoelectrochemical devices for H2O2 production: efficiency limit and operational constraint

Abstract

Three types of membrane-less photoelectrochemical (PEC) devices for solar-driven hydrogen peroxide (H2O2) production have been proposed, including (a) a H2O2 electrolyzer; (b) a photoelectrode-based PEC device; and (c) particulate photocatalysts in a suspension reactor. These devices can produce H2O2 from sunlight, water, and oxygen in air as the only inputs. Their respective efficiency limits were calculated by using the measured performance of H2O2 evolving electrocatalysts and by assuming idealized 100% selectivity for H2O2 accumulation, and by using the energy-conversion performance of light absorbers at their Shockley–Queisser limit. Multi-physics models for the three device configurations were employed for evaluating their electrochemical polarization behaviour as a function of the operating current density and for quantifying the respective contribution from the catalyst overpotential loss, the resistive loss between the cathode and anode, and the Nernstian potential loss due to pH gradients across the electrolyte. For particulate photocatalysts in a suspension, the concept of a non-zero light intensity threshold was for the first time applied to account for net positive H2O2 accumulation, which implies that the most efficient photocatalyst suspension should not fully absorb sunlight. The maximum solar-to-H2O2 conversion efficiency for a photoelectrode-based device was found to be 20.0%, fundamentally limited by the photocurrent density that is matched by dual absorbers in tandem series under 1-sun illumination. The maximum solar-to-H2O2 conversion efficiency for a particulate photocatalyst suspension can achieve 24.5–27.5% with a single-absorber band gap of 1.5–1.7 eV, depending on particle sizes. The modelling outcomes emphasize the importance of water-oxidation selectivity for achieving H2O2 accumulation towards molar concentration levels, and should guide the PEC H2O2 device implementation as the activity and selectivity of H2O2-evolving electro-catalysts continue to improve.

Graphical abstract: Membrane-less photoelectrochemical devices for H2O2 production: efficiency limit and operational constraint

Article information

Article type
Paper
Submitted
04 जुलाई 2018
Accepted
03 अक्तूबर 2018
First published
01 नवम्बर 2018

Sustainable Energy Fuels, 2019,3, 101-114

Membrane-less photoelectrochemical devices for H2O2 production: efficiency limit and operational constraint

S. Hu, Sustainable Energy Fuels, 2019, 3, 101 DOI: 10.1039/C8SE00329G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements