Issue 8, 2019

Tailoring surface acoustic wave atomisation for cryo-electron microscopy sample preparation

Abstract

Surface acoustic wave (SAW) atomisation has been widely explored for use in pharmacological delivery, hence performance is characterised predominately in terms of droplet size and maximum delivery of fluid, to ensure sufficient dosage is delivered to the right location. For the application of cryo electron microscopy grid preparation, however, what is required is the transfer of very little fluid onto the grid in a well-defined manner. To meet this requirement, the analysis of SAW atomisation needs to focus on very different characteristics. Specifically, we examine the aerosol jet geometry, in terms of width, cone angle, and elevation angle, and its stability at low power, and hence low flow rates. The variables used are the width and the location of the channel delivering the fluid to the site of atomization. From the experiments, it is observed that we can reach a flowrate as low as 0.55 μl s−1 with reasonable aerosol jet stability, a jet width of 0.5 mm wide and an elevation angle variation as low as 2°.

Graphical abstract: Tailoring surface acoustic wave atomisation for cryo-electron microscopy sample preparation

Supplementary files

Article information

Article type
Paper
Submitted
11 दिसम्बर 2018
Accepted
01 मार्च 2019
First published
04 मार्च 2019

Lab Chip, 2019,19, 1378-1385

Tailoring surface acoustic wave atomisation for cryo-electron microscopy sample preparation

D. Ashtiani, A. de Marco and A. Neild, Lab Chip, 2019, 19, 1378 DOI: 10.1039/C8LC01347K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements