Issue 34, 2017

A study of fused-ring thieno[3,4-e]pyrazine polymers as n-type materials for organic supercapacitors

Abstract

Conjugated polymer pseudocapacitors achieve high capacitances because they store charge through fast, reversible redox reactions. However, most of these polymers are only capable of storing charge in a ‘positive’ potential range, which results in low operating voltages and limited energy and power densities. The development of higher energy and power density polymer supercapacitors therefore hinges on the development of ‘negative’ charge-accepting pseudocapacitive materials to increase device operating voltages. Herein, we report the synthesis of a novel class of n-type pyreno[4,5-b]thieno[3,4-e]pyrazine (PTP) polymers. These polymers form the thickest films reported for reversibly negative and positive charge-accepting polymers synthesized by electrochemical oxidative polymerization. PTP polymers form porous films with capacitances of 6–14 F cm−3 at a current density of 0.5 A cm−3. The electrodes exhibit moderate cycling stability, with 42% capacitance retention after 200 cycles. This work demonstrates the first use of thienopyrazines (TPs) in energy storage applications, and provides guidelines for further improvements in the performance of n-type materials.

Graphical abstract: A study of fused-ring thieno[3,4-e]pyrazine polymers as n-type materials for organic supercapacitors

Supplementary files

Article information

Article type
Paper
Submitted
27 मार्च 2017
Accepted
04 मई 2017
First published
05 मई 2017

Polym. Chem., 2017,8, 5194-5202

A study of fused-ring thieno[3,4-e]pyrazine polymers as n-type materials for organic supercapacitors

B. T. McAllister, T. B. Schon, P. M. DiCarmine and D. S. Seferos, Polym. Chem., 2017, 8, 5194 DOI: 10.1039/C7PY00512A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements