Issue 22, 2016

Annealing-free perovskite films by instant crystallization for efficient solar cells

Abstract

Organic–inorganic perovskite solar cells (PSCs) have attracted considerable attention around the world because they can be fabricated easily and inexpensively by solution-based processes. The key to the fabrication of high-performance PSCs is the crystallinity and morphology of the perovskite film, and thermal annealing is usually required to achieve a film with the necessary properties. Herein, we introduce a technique for instant crystallization of perovskite films without the need for thermal annealing. Specifically, a solution of methylammonium iodide and lead iodide was spin-coated onto a substrate, and ethyl acetate was dripped onto the film during spinning to induce instant crystallization of a CH3NH3PbI3 perovskite film. The resulting crystalline film exhibited large crystal grains and a high carrier lifetime. PSCs fabricated with annealing-free films prepared by means of this technique exhibited performance comparable to that of PSCs fabricated with annealed films and showed much higher efficiency than did reference cells fabricated with annealing-free films. This new instant-crystallization technique offers a way to shorten the device fabrication time, which will reduce the cost of manufacturing efficient PSCs.

Graphical abstract: Annealing-free perovskite films by instant crystallization for efficient solar cells

Supplementary files

Article information

Article type
Communication
Submitted
24 मार्च 2016
Accepted
03 मई 2016
First published
04 मई 2016

J. Mater. Chem. A, 2016,4, 8548-8553

Annealing-free perovskite films by instant crystallization for efficient solar cells

M. Yin, F. Xie, H. Chen, X. Yang, F. Ye, E. Bi, Y. Wu, M. Cai and L. Han, J. Mater. Chem. A, 2016, 4, 8548 DOI: 10.1039/C6TA02490D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements