Volume 186, 2016

Tailoring structure formation and mechanical properties of particle brush solids via homopolymer addition

Abstract

Recent progress in the area of surface-initiated controlled radical polymerization (SI-CRP) has enabled the synthesis of polymer-grafted colloids with precise control over the architecture of grafted chains. The resulting ‘particle brush materials’ are of interest both from a fundamental as well as applied perspective because structural frustrations (associated with the tethering of chains to a curved surface) imply a sensitive dependence of the interactions between brush particles on the architecture of surface-tethered chains that offers new opportunities to design hybrid materials with novel functionalities. An important prerequisite for establishing structure–property relations in particle brush materials is to understand the role of homopolymer impurities that form, for example, by thermal self-initiation. This contribution presents a detailed discussion of the role of homopolymer additives on the structure and mechanical properties of particle brush materials. The results suggest that the dissolution of homopolymer fillers follows a two-step mechanism comprised of the initial segregation of homopolymer to the interstitial regions within the array and the subsequent swelling of the particle brush (depending on the respective degree of polymerization of brush and linear chains). Addition of even small amounts of homopolymer is found to significantly increase the fracture toughness of particle brush assembly structures. The increased resistance to failure could enable the synthesis of robust colloidal crystal type materials that can be processed into complex shapes using ‘classical’ polymer forming techniques such as molding or extrusion.

Associated articles

Article information

Article type
Paper
Submitted
17 अगस्त 2015
Accepted
26 अक्तूबर 2015
First published
26 अक्तूबर 2015

Faraday Discuss., 2016,186, 17-30

Author version available

Tailoring structure formation and mechanical properties of particle brush solids via homopolymer addition

M. Schmitt, C. M. Hui, Z. Urbach, J. Yan, K. Matyjaszewski and M. R. Bockstaller, Faraday Discuss., 2016, 186, 17 DOI: 10.1039/C5FD00121H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements