Issue 8, 2016

Selective oxidation of bulky organic sulphides over layered titanosilicate catalysts

Abstract

Selective oxidation of sulphides is a straightforward method of preparation of organic sulphoxides and sulphones, which are important chemical intermediates and building blocks of pharmaceuticals and agrochemicals. Oxidation of methylphenyl sulphide (MPS), diphenyl sulphide (Ph2S), and dibenzothiophene (DBTH) over lamellar titanosilicate catalysts with the MFI and UTL-derived topology was investigated with hydrogen peroxide as the oxidant. Lamellar titanosilicates combine the advantages of crystalline zeolites and mesoporous molecular sieves due to accessible active sites located on the external surface of their layers. The selectivity of the MPS oxidation to methylphenyl sulphoxide is driven by the diffusion restrictions in the catalyst. A methylphenyl sulphoxide selectivity of 95% at 40% conversion was achieved using the Ti-IPC-1-PI catalyst together with an outstanding TONtot = 1418 after 30 min. The selectivity can be adjusted also by dosing of the oxidant to keep its concentration low during the reaction. The silica–titania pillared TS-1-PITi catalyst showed the highest potential of the tested catalysts in oxidative desulphuration, easily oxidising the DBTH to dibenzothiothene sulphone.

Graphical abstract: Selective oxidation of bulky organic sulphides over layered titanosilicate catalysts

Supplementary files

Article information

Article type
Paper
Submitted
01 दिसम्बर 2015
Accepted
02 मार्च 2016
First published
03 मार्च 2016

Catal. Sci. Technol., 2016,6, 2775-2786

Selective oxidation of bulky organic sulphides over layered titanosilicate catalysts

J. Přech, R. E. Morris and J. Čejka, Catal. Sci. Technol., 2016, 6, 2775 DOI: 10.1039/C5CY02083B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements