Issue 6, 2016

A two-oxide nanodiode system made of double-layered p-type Ag2O@n-type TiO2 for rapid reduction of 4-nitrophenol

Abstract

The n-type TiO2 semiconductor nanoparticles were coated on the p-type Ag2O nanoparticles deposited on SiO2 spherical particles through a simple sol–gel method for catalytic reduction of 4-nitrophenol. The as-prepared spherical composite abbreviated as SiO2/Ag2O@TiO2 was characterized by different techniques and tested as a catalyst towards 4-nitrophenol (4-NP) reduction into 4-aminophenol (4-AP) with NaBH4 as a reducing agent at room temperature. This work combines an interesting design with the n-type TiO2 rich in electrons outward and the p-type Ag2O rich in electronic holes inward to form the p/n junction for the purpose of efficiently separating the charge carrier to have a longer lifetime of outward electrons for catalytic reduction reactions. The SiO2/Ag2O@TiO2 composite catalyst showed the best performance in the reduction of 4-NP to 4-AP within 30 seconds. Our results reveal that the p–n junction combined composite sphere was superior and efficient in reduction of 4-nitrophenol without using the light source. The conversion mechanism is proposed here. Overall, the SiO2/Ag2O@TiO2 composite can be used as a cost-effective reduction catalyst for converting the toxic 4-NP into useful 4-AP, an industrial organic intermediate compound.

Graphical abstract: A two-oxide nanodiode system made of double-layered p-type Ag2O@n-type TiO2 for rapid reduction of 4-nitrophenol

Article information

Article type
Paper
Submitted
27 नवम्बर 2015
Accepted
03 जनवरी 2016
First published
07 जनवरी 2016

Phys. Chem. Chem. Phys., 2016,18, 4405-4414

A two-oxide nanodiode system made of double-layered p-type Ag2O@n-type TiO2 for rapid reduction of 4-nitrophenol

O. Ahmed Zelekew and D. Kuo, Phys. Chem. Chem. Phys., 2016, 18, 4405 DOI: 10.1039/C5CP07320K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements