Issue 40, 2015

Inorganic–organic superlattice thin films for thermoelectrics

Abstract

Nanoscale layer-engineering is an attractive tool to tailor the performance of thermoelectric materials as it potentially allows us to suppress thermal conductivity without significantly hindering the electrical transport properties. By combining the state-of-the-art thin-film fabrication technique for inorganics, i.e. atomic layer deposition (ALD), with its emerging counterpart for the organics, i.e. molecular layer deposition (MLD), it is possible to fabricate in a single reactor oxide–organic thin-film superlattices in which periodically introduced single/few-molecule organic layers alternate with thicker thermoelectric oxide layers. In such fundamentally new types of superlattice materials the oxide–organic interfaces with notable property mismatch are anticipated to hinder the phonon transport and/or bring about charge confinement effects thereby enhancing the material's thermoelectric figure-of-merit. The experimental data so far gathered for the (Zn,Al)O:HQ and (Ti,Nb)O2:HQ systems (HQ stands for hydroquinone) show significantly suppressed thermal conductivities. Here in this topical review we summarize the experimental and computational studies carried out on these superlattice materials and discuss the future potential of the ALD/MLD-fabricated inorganic-organic superlattice and nanolaminate thin-film structures in thermoelectrics.

Graphical abstract: Inorganic–organic superlattice thin films for thermoelectrics

Article information

Article type
Review Article
Submitted
04 जून 2015
Accepted
24 अगस्त 2015
First published
26 अगस्त 2015

J. Mater. Chem. C, 2015,3, 10349-10361

Author version available

Inorganic–organic superlattice thin films for thermoelectrics

J.-P. Niemelä, A. J. Karttunen and M. Karppinen, J. Mater. Chem. C, 2015, 3, 10349 DOI: 10.1039/C5TC01643F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements