Issue 15, 2015

Squaramide-based tripodal ionophores for potentiometric sulfate-selective sensors with high selectivity

Abstract

A class of squaramide-based tripodal molecules was employed as new ionophores for highly sensitive and selective sulfate-selective sensors. Compared with the reported tripodal ionophore with urea, squaramide groups as superior hydrogen bonding donor were introduced into the tripodal structure to obtain new ionophores leading to better electrode performance. Three derivatives with unsubstituted (I), p-carbon trifluoride (II), and p-nitro (III) phenyl groups were attached to squaramide groups for the optimization of ionophore based sensors. Electron withdrawing p-nitrophenyl groups gave a greater enhancement of the hydrogen bond donor ability of squaramide so that Ionophore III was chosen as the best candidate for sulfate ion recognition. Such a membrane with 30 mol% TDMACl exhibited a Nernstian slope of −30.2 mV per decade to sulfate ions with a linear range from 1 μM to 100 mM in potentiometric measurement. The selectivity coefficients of the proposed sensor over H2PO4, Cl, Br, NO3, SCN, I and ClO4 were −4.3, −3.4, −2.5, −0.6, +3.1, +3.4 and +5.9, respectively, which were much better than the existing sulfate-selective sensors. The new sensors with high selectivity were successfully applied for the quantification of sulfate in cell lysates and drinking water with good recoveries.

Graphical abstract: Squaramide-based tripodal ionophores for potentiometric sulfate-selective sensors with high selectivity

Supplementary files

Article information

Article type
Paper
Submitted
06 फरवरी 2015
Accepted
27 मई 2015
First published
27 मई 2015

Analyst, 2015,140, 5317-5323

Squaramide-based tripodal ionophores for potentiometric sulfate-selective sensors with high selectivity

Y. Liu, Y. Qin and D. Jiang, Analyst, 2015, 140, 5317 DOI: 10.1039/C5AN00259A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements