Issue 7, 2012

Improved sample preparation and quality control for the characterisation of titanium dioxide nanoparticles in sunscreens using flow field flow fractionation on-line with inductively coupled plasma mass spectrometry

Abstract

Titanium dioxide in nanoparticulate form is used in large scale in a variety of consumer products including sunscreens. There is an increasing need for methodology for the reliable characterisation of the particle size and size dependent elemental composition in these complex matrices. Such measurement capability is essential for underpinning safety assessments, for quality control of existing products and for correlation of nanoparticle characteristics with biological effects observed in toxicity tests. This work describes the first systematic comparison and optimisation of extraction methods for titanium dioxide nanoparticles in sunscreen samples. Sunscreens were selected because of their wide use, high fat content and matrix of high complexity. Defatting of the sample with hexane followed by bath sonication with an aqueous extractant was found to provide stable suspensions of secondary titanium dioxide particles for their size characterisation by flow field flow fractionation on-line with element selective detection by inductively coupled plasma mass spectrometry. Further addition of a small amount of hexane to the aqueous extractant resulted in particle disaggregation and thus allowed for characterisation of the primary particle size. A novel approach based on sample spiking with aluminium-labelled titanium dioxide reference particles of known size was used to study the effect of extraction and separation conditions on particle size distribution in the presence of the real sample matrix. The developed methodology was applied to analysis of commercial sunscreens with various sun protection factors. Titanium extraction efficiency, particle size distribution and titanium dioxide recovery from the FFF channel were determined for each product.

Graphical abstract: Improved sample preparation and quality control for the characterisation of titanium dioxide nanoparticles in sunscreens using flow field flow fractionation on-line with inductively coupled plasma mass spectrometry

Article information

Article type
Paper
Submitted
23 दिसम्बर 2011
Accepted
14 मार्च 2012
First published
16 अप्रैल 2012

J. Anal. At. Spectrom., 2012,27, 1084-1092

Improved sample preparation and quality control for the characterisation of titanium dioxide nanoparticles in sunscreens using flow field flow fractionation on-line with inductively coupled plasma mass spectrometry

V. Nischwitz and H. Goenaga-Infante, J. Anal. At. Spectrom., 2012, 27, 1084 DOI: 10.1039/C2JA10387G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements