Issue 9, 2023

Sustainable porous carbons from tannic acid based KOH activated as high-performance CO2 capture sorbents

Abstract

A potentially viable strategy for the fabrication of efficient sorbents for CO2 capture is the use of porous carbons obtained from biomass, which have a large surface area and delicately organized porous structural framework. Herein, a series of porous carbons having enormous surface areas (as high as 2553 m2 g−1) and high micropore volumes (up to 0.8605 cm3 g−1) were fabricated from a renewable precursor, tannic acid. At a pressure of 1 bar, the porous carbons performed better at absorbing CO2; the respective maximal capacity was 7.03 and 4.29 mmol g−1 at 0 and 25 °C. The existence of a large number of narrow micropores with a pore width less than 0.86 nm and 0.70 nm plays a critical role in the CO2 uptake, respectively. Additionally, when tested against a mixture of CO2 and N2, TCKP-2-600 showed a good degree of selectivity for CO2 uptake as well as good recyclability. Additionally, the Langmuir, Freundlich, Toth isotherm and Redlich–Peterson models were employed to process and fit the experimental equilibrium values for the adsorption of CO2. All models accurately reflected the experimental data based on the standard deviation Δq (%) and regression coefficient (R2). This bioinspired precursor-synthesis technique is capable of generating porous carbons that are practically utilizable for a wide range of practical uses including CO2 absorption.

Graphical abstract: Sustainable porous carbons from tannic acid based KOH activated as high-performance CO2 capture sorbents

Supplementary files

Article information

Article type
Paper
Submitted
20 फरवरी 2023
Accepted
16 मार्च 2023
First published
16 मार्च 2023

Sustainable Energy Fuels, 2023,7, 2063-2073

Sustainable porous carbons from tannic acid based KOH activated as high-performance CO2 capture sorbents

Y. Zhang, F. Tian, X. Guo, M. Bai, T. Tang, X. Di, W. Wang, Z. Liu and X. Shao, Sustainable Energy Fuels, 2023, 7, 2063 DOI: 10.1039/D3SE00220A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements