Issue 28, 2020

Integrating 3D printing and self-assembly for layered polymer/nanoparticle microstructures as high-performance sensors

Abstract

The development of highly sensitive, selective, and low-cost chemical sensors that can detect trace amounts of volatile organic compounds (VOCs) is essential for environmental sustainability and human health monitoring. Here, a layer-by-layer technique for selective deposition and aligned placement of nanoparticles dependent upon 3D printing-enabled surface patterns is demonstrated. A reasonable deposition density and the preferential alignment of nanoparticles, here carbon nanofibers (CNFs), produced a high-performance chemosensor that can detect low concentrations of VOCs in gas and liquid forms. The highly enhanced sensitivity and selectivity were attributed to efficient electron transport and inter- and intra-nanofiber hopping. This research sheds light on a method to develop rapidly prototyped chemosensors, which are desired for applications in nanocomposite reinforcement, design of supercapacitor and battery devices, thermal dissipation management, surface tension control, and drug delivery systems.

Graphical abstract: Integrating 3D printing and self-assembly for layered polymer/nanoparticle microstructures as high-performance sensors

Supplementary files

Article information

Article type
Communication
Submitted
04 जून 2020
Accepted
04 जुलाई 2020
First published
04 जुलाई 2020

J. Mater. Chem. C, 2020,8, 9495-9501

Integrating 3D printing and self-assembly for layered polymer/nanoparticle microstructures as high-performance sensors

S. Jambhulkar, W. Xu, R. Franklin, D. Ravichandran, Y. Zhu and K. Song, J. Mater. Chem. C, 2020, 8, 9495 DOI: 10.1039/D0TC02660C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements