Issue 25, 2020

Methods for onboard monitoring of silver biocide during future human space exploration missions

Abstract

Silver ions (Ag+) have been proposed as a biocide to treat the water in NASA's next generation of human space exploration vehicles/habitats. One advantage of Ag+ is that it is effective as a biocide in a range (200 to 500 ppb) safe for human consumption. So, monitoring Ag+ is essential to ensure the safety and health of the crew. Here we present two analytical methods based on capillary electrophoresis and capacitively coupled contactless conductivity detection (CE-C4D) to address the need to monitor Ag+ levels in water. Using 5 M acetic acid as a background electrolyte (BGE), 100 ppb of Ag+ could be detected in a simulant of the International Space Station (ISS) water. In addition to Ag+, other inorganic cations (K+, Ca2+, Na+, Mg2+, Ni2+, and Zn2+) frequently found in the ISS potable water can be detected simultaneously using this BGE in less than 4.5 min. By using a BGE composed of 0.5 M acetic acid, levels of Ag+ as low as 25 ppb could be detected in the ISS water simulant in less than 2.5 min. Although in this condition none of the other cations interfered with the detection of Ag+, some of them co-migrated, which could prevent obtaining additional information about the sample composition.

Graphical abstract: Methods for onboard monitoring of silver biocide during future human space exploration missions

Article information

Article type
Paper
Submitted
12 मार्च 2020
Accepted
07 मई 2020
First published
14 मई 2020

Anal. Methods, 2020,12, 3205-3209

Methods for onboard monitoring of silver biocide during future human space exploration missions

M. S. Ferreira Santos, A. C. Noell and M. F. Mora, Anal. Methods, 2020, 12, 3205 DOI: 10.1039/D0AY00518E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements