Issue 10, 2018

Forensic analysis of lead–tin solder by inductively coupled plasma mass spectrometry

Abstract

Lead–tin solder is commonly used in the making of improvised explosive devices (IEDs) and may be used to narrow down the list of suspects if pieces of solder salvaged at the crime scene can be matched to unused pieces found in a suspect's home. Using inductively coupled plasma mass spectrometry, the Ni, Cu, Sb and Bi trace impurities as well as the Pb and Sn major elements were quantified in lead–tin solders. Each 10 mg solder sample was fully digested in 2 mL of HNO3 and 0.5 mL of HCl with heating at 150 °C. Before dilution to 50 mL with high-purity water, 8 mL of HNO3 and 2 mL of HCl were added. Solutions were then diluted 1 : 100 for solder samples and 1 : 50 for the 99% Pb bullet standard reference material (SRM) that was used for day-to-day quality control. External calibration was performed using NIST SRM 1131, a 40 : 60 Sn : Pb solder SRM, digested and diluted like the samples. Distinguishable differences in the concentrations of major and trace elements were observed between eight different pieces of solder, which can help with identification in forensic cases. A heating gun with a copper soldering tip was also tested on two types of solder to see its effect on trace elemental concentrations. An increase in Cu concentration resulted for the solder sample with a rosin core, clearly indicating contamination. Such contamination may thus also provide information on the type of soldering gun used if the solder used to make the IED contained a rosin core.

Graphical abstract: Forensic analysis of lead–tin solder by inductively coupled plasma mass spectrometry

Article information

Article type
Technical Note
Submitted
29 जून 2018
Accepted
30 अगस्त 2018
First published
30 अगस्त 2018

J. Anal. At. Spectrom., 2018,33, 1784-1789

Forensic analysis of lead–tin solder by inductively coupled plasma mass spectrometry

L. Huang, D. Beauchemin and C. Dalpé, J. Anal. At. Spectrom., 2018, 33, 1784 DOI: 10.1039/C8JA00222C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements