Issue 9, 2018

WO3-decorated ZnO nanostructures for light-activated applications

Abstract

In the present work, a two-step vapor-phase route was implemented for the tailored design of ZnO–WO3 nanoheterostructures supported on fluorine-doped tin oxide (FTO) substrates. Under optimized conditions, the sequential use of chemical vapor deposition (CVD) and radio frequency (RF)-sputtering for the deposition of zinc and tungsten oxides respectively, resulted in the growth of calyx-like ZnO nanostructures uniformly decorated by a conformal dispersion of low-sized WO3 nanoparticles. The target materials were characterized by means of a multi-technique approach, with particular regard to their structural, compositional, morphological and optical properties. Finally, their photocatalytic performances were preliminarily tested in the abatement of NOX gases (NO and NO2). Due to the unique porous morphology of the ZnO nanodeposit and the high density of ZnO–WO3 heterojunctions, WO3-decorated ZnO revealed appealing De-NOX characteristics in terms of both degradation efficiency and selectivity. Such features, along with the photoinduced superhydrophilicity and self-cleaning properties of the present nanomaterials, candidate them as promising functional platforms for applications in smart windows and building materials for environmental remediation.

Graphical abstract: WO3-decorated ZnO nanostructures for light-activated applications

Supplementary files

Article information

Article type
Paper
Submitted
12 दिसम्बर 2017
Accepted
03 फरवरी 2018
First published
05 फरवरी 2018

CrystEngComm, 2018,20, 1282-1290

WO3-decorated ZnO nanostructures for light-activated applications

A. Gasparotto, G. Carraro, C. Maccato, C. Sada, J. Balbuena, M. Cruz-Yusta, L. Sánchez, N. Vodišek, U. Lavrencic Štangar and D. Barreca, CrystEngComm, 2018, 20, 1282 DOI: 10.1039/C7CE02148H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements