Issue 47, 2017

A three-dimensional hierarchical structure of cyclized-PAN/Si/Ni for mechanically stable silicon anodes

Abstract

The main challenges associated with silicon anodes are their poor conductivity and severe structural degradation during cycling. Here we design a three-dimensional sandwich hierarchical structure that tackles these problems, and we demonstrate its use in flexible, large-area silicon anode assemblies. The design of the electrode is achieved via plasma enhanced chemical vapor deposition of silicon nanoparticles onto three-dimensional nickel foam followed by conformal coating of cyclized-PAN on the silicon surface, thus forming a sandwiched cyclized-PAN/Si/Ni hierarchical structure. The three-dimensional networks provide abundant electroactive zones and conductive transport paths, the conformal coating of cyclized-PAN accommodates volume change during cycling, and the monolithic electrode configuration without additional binders or conductive agents improves the energy density of the whole electrode. Furthermore, as a result of the sandwich hierarchical arrangement, the solid-electrolyte interface of the anode remains stable and spatially confined, leading to an increased reversible capacity and improved cycling stability (910 mA h g−1 after 100 cycles at 1.0 A g−1).

Graphical abstract: A three-dimensional hierarchical structure of cyclized-PAN/Si/Ni for mechanically stable silicon anodes

Article information

Article type
Paper
Submitted
03 अक्तूबर 2017
Accepted
02 नवम्बर 2017
First published
08 नवम्बर 2017

J. Mater. Chem. A, 2017,5, 24667-24676

A three-dimensional hierarchical structure of cyclized-PAN/Si/Ni for mechanically stable silicon anodes

W. Bao, J. Wang, S. Chen, W. Li, Y. Su, F. Wu, G. Tan and J. Lu, J. Mater. Chem. A, 2017, 5, 24667 DOI: 10.1039/C7TA08744F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements