Issue 40, 2017

Highly stable CsPbBr3 quantum dots coated with alkyl phosphate for white light-emitting diodes

Abstract

Inorganic halide perovskite quantum dots (QDs) suffer from problems related to poor water stability and poor thermal stability. Here we developed a simple strategy to synthesize alkyl phosphate (TDPA) coated CsPbBr3 QDs by using 1-tetradecylphosphonic acid both as the ligand for the CsPbBr3 QDs and as the precursor for the formation of alkyl phosphate. These QDs not only retain a high photoluminescence quantum yield (PLQY, 68%) and narrow band emission (FHWM ∼ 22 nm) but also exhibit high stability against water and heat. The relative PL intensity of the QDs was maintained at 75% or 59% after being dispersed in water for 5 h or heated to 375 K (100 °C), respectively. Finally, white light-emitting diodes (WLEDs) with a high luminous efficiency of 63 lm W−1 and a wide color gamut (122% of NTSC) were fabricated by using green-emitting CsPbBr3/TDPA QDs and red-emitting K2SiF6:Mn4+ phosphors as color converters. The luminous efficiency of the WLEDs remained at 90% after working under a relative humidity (RH) of 60% for 15 h, thereby showing promise for use as backlight devices in LCDs.

Graphical abstract: Highly stable CsPbBr3 quantum dots coated with alkyl phosphate for white light-emitting diodes

Supplementary files

Article information

Article type
Communication
Submitted
12 יונ 2017
Accepted
11 ספט 2017
First published
14 ספט 2017

Nanoscale, 2017,9, 15286-15290

Highly stable CsPbBr3 quantum dots coated with alkyl phosphate for white light-emitting diodes

T. Xuan, X. Yang, S. Lou, J. Huang, Y. Liu, J. Yu, H. Li, K. Wong, C. Wang and J. Wang, Nanoscale, 2017, 9, 15286 DOI: 10.1039/C7NR04179A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements