Issue 4, 2024

Biomass@MOF nanohybrid materials for competitive drug adsorption: analysis by conventional macroscopic models and statistical physical models

Abstract

This study discloses the design of nanohybrid Biomass@MOF resulting from the functionalization of a hydrochar (HC) through hydrothermal treatment (HT) of corn cob residues and MIL-53(Al). The nanohybrid, composed of 71 wt% Biomass and 29 wt% MOF, demonstrates stability and effectiveness after leaching and stability tests. Physicochemical characterization (SEM, BET, TGA, FTIR, XRD, XRF, and XPS) of the resulting hybrid confirms the development of a new nanostructure formed via in situ growth of MOF crystals by hybridizing reticular oxygen species present on the HC surface. HC@MIL-53(Al) served as an adsorbent for pharmaceutical compounds ketorolac (KTC) and naproxen (NPX) in a two-component and competing system. Under extreme conditions, HC@MIL-53(Al) proves to be a high-performing adsorbent, removing 100% of KTC and NPX in a mixture when their concentration is up to 150 ppm. Conventional isotherm models for bicomponent systems along with physical-statistical microscopic models revealed that the complex structure of the new composite utilizes functional groups of HC (–OH) and MIL-53(Al) (C[double bond, length as m-dash]C) for physisorption of both contaminants, leading to the formation of adsorbate–adsorbate multilayers. These characteristics are further validated by a desorption study, demonstrating the ability of recovered HC@MIL-53(Al) to adsorb both contaminants with approximately 90% of their initial capacity after 5 cycles.

Graphical abstract: Biomass@MOF nanohybrid materials for competitive drug adsorption: analysis by conventional macroscopic models and statistical physical models

Supplementary files

Article information

Article type
Paper
Submitted
18 נוב 2023
Accepted
05 פבר 2024
First published
16 פבר 2024

Environ. Sci.: Nano, 2024,11, 1543-1558

Biomass@MOF nanohybrid materials for competitive drug adsorption: analysis by conventional macroscopic models and statistical physical models

B. F. Rivadeneira-Mendoza, L. S. Quiroz-Fernández, F. F. da Silva, R. Luque, A. M. Balu and J. M. Rodríguez-Díaz, Environ. Sci.: Nano, 2024, 11, 1543 DOI: 10.1039/D3EN00843F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements