Issue 19, 2023

A polythiourea protective layer for stable lithium metal anodes

Abstract

Uncontrolled Li dendrite growth and low Coulombic efficiency severely limit the practical applications of Li metal batteries (LMBs). Establishing a stable solid electrolyte interphase (SEI) on the surface of the Li metal anodes (LMAs) is considered to be an effective solution. Here, we report an organic–inorganic composite SEI at the molecular level that effectively reduces the consumption of electrolytes during SEI formation. The artificial SEI layer consists of Li salts and polythiourea. Upon cycling, inorganic components including LiF, Li2S and Li3N formed in situ, which enhanced the mechanical properties of the composite SEI and guaranteed facile ion transport. In addition, polythiourea itself carries abundant S atoms and polar groups, which can be closely bonded with LMAs to suppress the growth of Li dendrites. The polar groups can also guide a uniform Li+ flux and form a stable structure over a long period of time. The employment of an organic–inorganic SEI enables high efficiency Li deposition and stable cycling of Ni-rich Li‖LiNi0.88Co0.09Mn0.03O2 (NCM88) cells. After 240 cycles, the capacity retention rate is 83.5%. This work provides another artificial SEI design with a promising building block.

Graphical abstract: A polythiourea protective layer for stable lithium metal anodes

Supplementary files

Article information

Article type
Communication
Submitted
05 מרץ 2023
Accepted
27 אפר 2023
First published
27 אפר 2023

J. Mater. Chem. A, 2023,11, 10155-10163

A polythiourea protective layer for stable lithium metal anodes

X. He, Z. Liu, Y. Yang, Z. Wang, Y. Chen, Q. Zhang, Z. Shi, Y. Tan, X. Yue and Z. Liang, J. Mater. Chem. A, 2023, 11, 10155 DOI: 10.1039/D3TA01343J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements