Issue 15, 2021

3D-printing for forensic chemistry: voltammetric determination of cocaine on additively manufactured graphene–polylactic acid electrodes

Abstract

Cocaine is probably one of the most trafficked illicit drugs in the world. For this reason, police forces require fast, selective, and sensitive methods for cocaine detection at crime scenes. Taking benefit of additive manufacturing, we demonstrate that 3D-printed graphene–polylactic acid (G–PLA) electrodes using the affordable fused deposition modelling technique can identify and quantify cocaine in seized drugs. The detection of cocaine based on its electrochemical oxidation on such electrodes was dramatically improved after an electrochemical surface treatment that generates reduced graphene oxide (anodic followed by a cathodic treatment). Square-wave voltammetric determination of cocaine was achieved in the concentration range between 20 and 100 μmol L−1, with a detection limit of 6 μmol L−1, and free from the interference of paracetamol, caffeine, phenacetin, lidocaine, benzocaine and levamisole, which are common adulterants found in seized drugs. The analytical characteristics obtained using 3D-printed G–PLA electrodes were comparable with those of previously reported electrochemical sensors, but presented the inherent advantages of the 3D-printing technology that enables low-cost, reproducible, and large-scale production of such electrodes in remote areas combined with the use of an environmentally-friendly biopolymer.

Graphical abstract: 3D-printing for forensic chemistry: voltammetric determination of cocaine on additively manufactured graphene–polylactic acid electrodes

Supplementary files

Article information

Article type
Paper
Submitted
01 פבר 2021
Accepted
09 מרץ 2021
First published
09 מרץ 2021

Anal. Methods, 2021,13, 1788-1794

3D-printing for forensic chemistry: voltammetric determination of cocaine on additively manufactured graphene–polylactic acid electrodes

R. G. Rocha, J. S. Ribeiro, M. H. P. Santana, E. M. Richter and R. A. A. Muñoz, Anal. Methods, 2021, 13, 1788 DOI: 10.1039/D1AY00181G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements