Issue 31, 2020

Atomic-layer-deposited SnO2 on Pt/C prevents sintering of Pt nanoparticles and affects the reaction chemistry for the electrocatalytic glycerol oxidation reaction

Abstract

Atomic layer deposition (ALD) is an efficient technique that allows atomic-level surface control of metal catalysts for the design and development of electrocatalytic materials. Herein, we report a strategy for efficient catalyst design using a particle ALD method to enhance the electrocatalytic glycerol-oxidation-reaction (GOR) performance. Atomically controlled thin SnO2 layers were deposited on a carbon-supported Pt nanoparticle (Pt/C) surface using the ALD technique. The resulting SnO2 overcoated Pt/C (ALD(SnO2)–Pt/C) was then heat-treated at 400 °C under a N2 atmosphere. The onset potential as a kinetic parameter decreased with ALD (SnO2) coatings. The turnover frequency (TOF) for the GOR showed similar values for the tested samples (TOF of Pt/C: 74.86 h−1 and TOF of ALD(SnO2)–Pt/C: 91.29 h−1). Interestingly, interactions between the ALD SnO2 overcoating and Pt nanoparticles improved the catalytic stability for the GOR, preventing sintering of Pt nanoparticle catalysts. This demonstrates that an ALD SnO2 coating on defect sites of Pt can diminish Pt sintering for the GOR. From the GOR in an electrochemical batch reactor, the ALD(SnO2)–Pt/C catalyst also generated more glyceraldehyde (GAD) product than uncoated Pt/C at a similar glycerol conversion level. The density functional theory (DFT) calculations suggest that the binding energies of glycerol and reaction intermediates change at the interface of the SnO2-coated Pt surface compared to those at the Pt surface only, thus affecting the reaction chemistry for the electrocatalytic GOR. This work highlights how we can control reaction performance measures such as catalytic stability and product selectivity by using the particle ALD technique for electrocatalytic reactions such as glycerol oxidation.

Graphical abstract: Atomic-layer-deposited SnO2 on Pt/C prevents sintering of Pt nanoparticles and affects the reaction chemistry for the electrocatalytic glycerol oxidation reaction

Supplementary files

Article information

Article type
Paper
Submitted
04 מרץ 2020
Accepted
23 יונ 2020
First published
25 יונ 2020

J. Mater. Chem. A, 2020,8, 15992-16005

Atomic-layer-deposited SnO2 on Pt/C prevents sintering of Pt nanoparticles and affects the reaction chemistry for the electrocatalytic glycerol oxidation reaction

D. Lee, Y. Kim, H. Han, W. B. Kim, H. Chang, T. Chung, J. H. Han, H. W. Kim and H. J. Kim, J. Mater. Chem. A, 2020, 8, 15992 DOI: 10.1039/D0TA02509G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements