Mechano-assisted synthesis of an ultramicroporous metal–organic framework for trace CO2 capture

Zhaoqiang Zhang; Qi Ding; Shing Bo Peh; Dan Zhao; Jiyu Cui; Xili Cui; Huabin Xing

doi:10.1039/D0CC03196H

You do not have JavaScript enabled. Please enable JavaScript to access the full features of the site or access our non-JavaScript page.

Mechano-assisted synthesis of an ultramicroporous metal–organic framework for trace CO₂ capture†

Zhaoqiang Zhang,

^a Qi Ding,^a Shing Bo Peh,^b Dan Zhao,

^b Jiyu Cui,^a Xili Cui

*^a and Huabin Xing

Author affiliations

* Corresponding authors

^a Key Laboratory of Biomass Chemical Engineering of Ministry of Education, College of Chemical and Biological Engineering, Zhejiang University, Hangzhou 310027, China
E-mail: cuixl@zju.edu.cn

^b Department of Chemical and Biomolecular Engineering, National University of Singapore, 4 Engineering Drive 4, Singapore 117585, Singapore

Abstract

An ultramicroporous MOF, ZU-36-Ni (GeFSIX-3-Ni) is obtained for the first time via a mechanochemical-assisted approach. The material exhibits excellent performance for trace CO₂ capture (1.07 mmol g⁻¹ at 400 ppm) and benchmark 50/50 CO₂/CH₄ selectivity of 930, which is proven by dynamic breakthrough tests.

This article is part of the themed collection: Chemical Communications HOT Articles

Download options Please wait...

Supplementary files

Article information

DOI: https://doi.org/10.1039/D0CC03196H
Article type: Communication
Submitted: 04 מאי 2020
Accepted: 12 יונ 2020
First published: 13 יונ 2020

Download Citation

Chem. Commun., 2020,56, 7726-7729

Permissions

Request permissions

Mechano-assisted synthesis of an ultramicroporous metal–organic framework for trace CO₂ capture

Z. Zhang, Q. Ding, S. B. Peh, D. Zhao, J. Cui, X. Cui and H. Xing, Chem. Commun., 2020, 56, 7726 DOI: 10.1039/D0CC03196H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Social activity

Fetching data from CrossRef.
This may take some time to load.

Chemical Communications