Issue 8, 2019

High power mechanical energy harvester based on exfoliated black phosphorous–polymer composite and its multiple applications

Abstract

Black phosophorous (BP) and its 2D analogue phosphorene are endowed with several striking properties due to their unique puckered structure. One attribute that can potentially attract multiple applications of interest, and yet not fully addressed, is their mechano-electric response. Herein, we demonstrate the utility of an uniformly dense dispersion of few layer BP (FLBP) nanosheets in PDMS (polydimethylsiloxane) matrix, with a high 2D-dielectric interface density, exhibiting a remarkably strong mechanical energy harvesting effect. A highest peak-to-peak voltage output of about 350 V is achieved with a maximum current density of 12.8 mA m−2 under an applied impact force of 40 N, at a frequency range of 20–25 Hz. This corresponds to a volume power density of 2 kW m−3 with active material (BP) contribution of 0.35 W g−1. Notably, the 2D BP nanosheets themselves are found to exhibit a fairly high piezoelectric coefficient of ∼20 pm V−1 as revealed by the piezoresponse force microscopy (PFM). First principles DFT calculations suggest the existence of strain-induced polarization in the BP layers via deformation-induced redistribution of intra-layer electron charge density. Based on the experimental and theoretical findings, we propose a synergistic multi-polarization mechanism that contributes to the strength of the observed energy harvesting effect. We also present three interesting practical modes of energy harvesting by subjecting them to the rapid flow of water, bicycle wheel motion and tapping induced LED lighting.

Graphical abstract: High power mechanical energy harvester based on exfoliated black phosphorous–polymer composite and its multiple applications

Supplementary files

Article information

Article type
Communication
Submitted
29 אפר 2019
Accepted
23 יונ 2019
First published
26 יונ 2019

Sustainable Energy Fuels, 2019,3, 1943-1950

High power mechanical energy harvester based on exfoliated black phosphorous–polymer composite and its multiple applications

S. K. Singh, S. Muduli, D. Dhakras, R. Pandey, R. Babar, A. Singh, D. Kabra, M. Kabir, R. Boomishankar and S. Ogale, Sustainable Energy Fuels, 2019, 3, 1943 DOI: 10.1039/C9SE00267G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements