Issue 3, 2018

A study on electrochemical properties of P2-type Na–Mn–Co–Cr–O cathodes for sodium-ion batteries

Abstract

Na0.67Co0.25Mn0.75−xCrxO2 (x = 0, 0.05, 0.10, 0.15) oxides were prepared by a conventional solid-state reaction. The electrochemical properties of P2-type Na–Mn–Co–Cr–O cathodes for sodium-ion batteries have been investigated systematically. X-ray diffractometry and field emission scanning electron microscopy show that Cr ions are successfully incorporated into the lattice of the Na–Co–Mn–O oxide, and a P2-type layered structure with the P63/mmc space group remains unchanged after Cr-doping. The electrochemical measurements show that the maximum discharge capacity and the cycling stability of the matrix material is significantly enhanced by Cr-doping, which may be ascribed to the expanded a-axis and lattice volume, and the improvement of the rate capability is attributed to the significant decrease of the charge transfer resistance and the increase of the apparent Na+ diffusion coefficient. In the potential region of 2.0–4.0 V at 0.12C, Na0.67Co0.25Mn0.65Cr0.10O2 delivers the maximum discharge capacity of 128.1 mA h g−1, which is 10.31% higher than that of the un-doped sample, and the capacity retention of the sample is 66.35% after 100 cycles, which is 39.09% higher than that of the un-doped sample. It is suggested that the optimal Cr content can effectively improve the electrochemical properties of P2-type Na–Mn–Co–O cathodes for sodium ion batteries.

Graphical abstract: A study on electrochemical properties of P2-type Na–Mn–Co–Cr–O cathodes for sodium-ion batteries

Article information

Article type
Research Article
Submitted
09 דצמ 2017
Accepted
28 דצמ 2017
First published
02 ינו 2018

Inorg. Chem. Front., 2018,5, 577-584

A study on electrochemical properties of P2-type Na–Mn–Co–Cr–O cathodes for sodium-ion batteries

Y. Wang, J. Tang, X. Yang and W. Huang, Inorg. Chem. Front., 2018, 5, 577 DOI: 10.1039/C7QI00778G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements