Issue 23, 2017

Tunable delayed controlled release profile from layered polymeric microparticles

Abstract

Composite microparticles (MPs) with layered architecture, engineered from poly(L-lactic acid) (PLLA) and poly(D,L-lactic-co-glycolic acid) (PLGA), are promising devices for achieving the delayed release of proteins. Here, we build on a water-in-oil-in-oil-in-water emulsion method of fabricating layered MPs with an emphasis on modulating the delay period of the protein release profile. Particle hardening parameters (i.e. polymer precipitation rate and total hardening time) following water-in-oil-in-oil-in-water emulsions are known to affect MP structure such as the core/shell material and cargo localization. We demonstrate that layered MPs fabricated with two different solvent evaporation parameters not only alter polymer and protein distribution within the hardened MPs, but also affect their protein release profiles. Secondly, we hypothesize that ethanol (EtOH), a semi-polar solvent miscible in both the solvent (dichloromethane; DCM) and non-solvent aqueous phases, likely alters DCM and water flux from the dispersed oil phase. The results reveal that EtOH affects protein distribution within MPs, and may also influence MP structural properties such as porosity and polymer distribution. To our knowledge, we are the first to demonstrate EtOH as a means for modulating critical release parameters from protein-loaded, layered PLGA/PLLA MPs. Throughout all the groups in the study, we achieved differential delay periods (between 0–30 days after an initial burst release) and total protein release periods (∼30 to >58 days) as a function of solvent evaporation parameters and EtOH content. The layered MPs proposed in the study potentially have wide-reaching applications in tissue engineering for delayed and sequential protein release.

Graphical abstract: Tunable delayed controlled release profile from layered polymeric microparticles

Supplementary files

Article information

Article type
Paper
Submitted
12 ינו 2017
Accepted
13 מרץ 2017
First published
13 מרץ 2017

J. Mater. Chem. B, 2017,5, 4487-4498

Tunable delayed controlled release profile from layered polymeric microparticles

D. Dutta, C. Fauer, K. Hickey, M. Salifu and S. E. Stabenfeldt, J. Mater. Chem. B, 2017, 5, 4487 DOI: 10.1039/C7TB00138J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements