Issue 80, 2016

Conversion of methanol to propylene over nano-sized ZSM-5 zeolite aggregates synthesized by a modified seed-induced method with CTAB

Abstract

A facile and economical route to synthesize nano-sized ZSM-5 zeolite aggregates with mesopores was developed by a modified seed-induced method using silicate-1 (S-1) as seeds without additional templates in the presence of a trace amount of cetyltrimethylammonium bromide (CTAB). The effect of the amounts of CTAB and S-1 on the morphologies and textural properties were studied in detail, and the possible formation mechanism was proposed. The primary crystal sizes of the ZSM-5 zeolites could be adjusted and mesopores were generated in a certain range. The resulting ZSM-5 zeolites showed a uniformly conglobate morphology with particle sizes of 400–600 nm, aggregated with 20–50 nm crystallites, possessing a large external surface area and abundant inter-crystallite mesopores under the optimum synthesis conditions (CTAB to total SiO2 molar ratio was 0.02 and SiO2 in S-1 gel took up 8% to the total SiO2). The catalytic performance of nano-sized ZSM-5 zeolites in methanol to propylene reaction showed a high stability and high propylene selectivity.

Graphical abstract: Conversion of methanol to propylene over nano-sized ZSM-5 zeolite aggregates synthesized by a modified seed-induced method with CTAB

Article information

Article type
Paper
Submitted
07 יונ 2016
Accepted
08 אוג 2016
First published
08 אוג 2016

RSC Adv., 2016,6, 76642-76651

Conversion of methanol to propylene over nano-sized ZSM-5 zeolite aggregates synthesized by a modified seed-induced method with CTAB

H. Chen, Y. Wang, F. Meng, H. Li, S. Wang, C. Sun, S. Wang and X. Wang, RSC Adv., 2016, 6, 76642 DOI: 10.1039/C6RA14753D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements