Issue 29, 2016

Tailoring the electrical and photo-electrical properties of a WS2 field effect transistor by selective n-type chemical doping

Abstract

Here, we demonstrate a doping technique which remarkably improves the electrical and photoelectric characteristics of a WS2 field effect transistor (FET) by chemical doping. The shift of the threshold voltage towards a negative gate voltage and the red shift of the E12g and A1g peaks in the Raman spectra confirm the n-type doping effect in WS2 FETs. WS2 films show an unprecedented high mobility of 255 cm2 V−1 s−1 at room temperature. The on/off ratio of the output current is ∼108 at room temperature. The mobility of a multilayer ML-WS2 FET was found to be 425 cm2 V−1 s−1 at 5 K. Semiconductor-to-metal transitions were also observed at Vbg > 30 V. A decrease in contact and sheet resistance was observed after potassium iodide (KI) doping. The photocurrent in WS2 FETs was also enhanced after n-type doping. Chemical doping exhibited a very stable, effective, and easy-to-apply method to enhance the performance of a WS2 FET.

Graphical abstract: Tailoring the electrical and photo-electrical properties of a WS2 field effect transistor by selective n-type chemical doping

Supplementary files

Article information

Article type
Paper
Submitted
26 ינו 2016
Accepted
25 פבר 2016
First published
26 פבר 2016

RSC Adv., 2016,6, 24675-24682

Tailoring the electrical and photo-electrical properties of a WS2 field effect transistor by selective n-type chemical doping

M. W. Iqbal, M. Z. Iqbal, M. F. Khan, M. A. Kamran, A. Majid, T. Alharbi and J. Eom, RSC Adv., 2016, 6, 24675 DOI: 10.1039/C6RA02390H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements