Issue 8, 2016

Direct 3D-printing of cell-laden constructs in microfluidic architectures

Abstract

Microfluidic platforms have greatly benefited the biological and medical fields, however standard practices require a high cost of entry in terms of time and energy. The utilization of three-dimensional (3D) printing technologies has greatly enhanced the ability to iterate and build functional devices with unique functions. However, their inability to fabricate within microfluidic devices greatly increases the cost of producing several different devices to examine different scientific questions. In this work, a variable height micromixer (VHM) is fabricated using projection 3D-printing combined with soft lithography. Theoretical and flow experiments demonstrate that altering the local z-heights of VHM improved mixing at lower flow rates than simple geometries. Mixing of two fluids occurs as low as 320 μL min−1 in VHM whereas the planar zigzag region requires a flow rate of 2.4 mL min−1 before full mixing occurred. Following device printing, to further demonstrate the ability of this projection-based method, complex, user-defined cell-laden scaffolds are directly printed inside the VHM. The utilization of this unique ability to produce 3D tissue models within a microfluidic system could offer a unique platform for medical diagnostics and disease modeling.

Graphical abstract: Direct 3D-printing of cell-laden constructs in microfluidic architectures

  • This article is part of the themed collection: 3D Printing

Supplementary files

Article information

Article type
Paper
Submitted
01 פבר 2016
Accepted
08 מרץ 2016
First published
08 מרץ 2016

Lab Chip, 2016,16, 1430-1438

Direct 3D-printing of cell-laden constructs in microfluidic architectures

J. Liu, H. H. Hwang, P. Wang, G. Whang and S. Chen, Lab Chip, 2016, 16, 1430 DOI: 10.1039/C6LC00144K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements