Issue 40, 2015

In situ crosslinking of electrospun gelatin for improved fiber morphology retention and tunable degradation

Abstract

Electrospinning is a popular technique to fabricate tissue engineering scaffolds due to the exceptional tunability of the fiber morphology, which can be used to control the scaffold mechanical properties, degradation rate, and cell behavior. Recent work has focused on electrospinning natural polymers such as gelatin to improve the regeneration potential of these grafts. Gelatin scaffolds must be crosslinked to avoid rapid dissolution upon implantation with current crosslinking strategies requiring additional post-processing steps. Despite the strong dependence of scaffold properties on fiber morphology, there has been minimal emphasis on retaining the original fiber morphology of electrospun gelatin scaffolds after implantation. This work describes a method for in situ crosslinking of gelatin to produce electrospun fibers with improved fiber morphology retention after implantation. A double barrel syringe with an attached mixing head and a diisocyanate crosslinker were utilized to generate electrospun scaffolds that crosslink during the electrospinning process. These in situ crosslinked fiber meshes retained morphology after 1 week incubation in water at 37 °C; whereas, uncrosslinked meshes lost the fibrous morphology within 24 hours. Degree of crosslinking was quantified and relationships between the crosslinker ratio and enzymatic degradation rate were evaluated. The degradation rate decreased with increased crosslinker ratio, resulting in a highly tunable system. Additionally, tensile testing under simulated physiological conditions indicated that increased crosslinker ratios resulted in increases in initial modulus and tensile strength. Overall, this in situ crosslinking technique provides a method to crosslink gelatin during electrospinning and can be used to tune the degradation rate of resulting scaffolds while enabling improved fiber morphology retention after implantation.

Graphical abstract: In situ crosslinking of electrospun gelatin for improved fiber morphology retention and tunable degradation

Associated articles

Article information

Article type
Paper
Submitted
17 מאי 2015
Accepted
26 יול 2015
First published
03 אוג 2015

J. Mater. Chem. B, 2015,3, 7930-7938

Author version available

In situ crosslinking of electrospun gelatin for improved fiber morphology retention and tunable degradation

A. P. Kishan, R. M. Nezarati, C. M. Radzicki, A. L. Renfro, J. L. Robinson, M. E. Whitely and E. M. Cosgriff-Hernandez, J. Mater. Chem. B, 2015, 3, 7930 DOI: 10.1039/C5TB00937E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements