Issue 18, 2019

A sodium citrate-modified-PEDOT:PSS hole transporting layer for performance enhancement in inverted planar perovskite solar cells

Abstract

The properties of the hole transporting layer (HTL) play an important role in determining the performance of inverted planar perovskite solar cells (PSCs). High performance methylammonium lead iodide PSCs were demonstrated through controlled growth of the perovskite layer and suppression of charge recombination at the perovskite/electrode interfaces. In this work, the effect of the sodium citrate modified poly(3,4-ethylenedioxythiophene):poly(4-styrenesulfonate) (PEDOT:PSS) HTL on the growth of the perovskite active layer, the charge extraction properties and hence the performance of the PSCs was investigated. A power conversion efficiency (PCE) of >11.50% was achieved for low-processing temperature solution-processable PSCs made with a sodium citrate modified PEDOT:PSS HTL, and is >20% higher than that of a structurally identical control PSC with a pristine PEDOT:PSS HTL (9.13%). Photoelectron spectroscopy measurements reveal that sodium citrate solution modification partially removes the PSS on the surface of the PEDOT:PSS HTL, leading to an almost two times increase in the ratio of PEDOT to PSS as compared to that measured for the pristine PEDOT:PSS HTL. The light intensity-dependent JV characteristics of the PSCs were measured to analyze the performance enhancement of the PSCs. The results reveal that the sodium citrate-modified PEDOT:PSS HTL benefits the efficient operation of PSCs in two ways: (1) it assists the crystal growth to increase in the perovskite domain size, and (2) it favors the charge collection in the PSCs.

Graphical abstract: A sodium citrate-modified-PEDOT:PSS hole transporting layer for performance enhancement in inverted planar perovskite solar cells

Article information

Article type
Paper
Submitted
30 נוב 2018
Accepted
07 ינו 2019
First published
08 ינו 2019

J. Mater. Chem. C, 2019,7, 5260-5266

A sodium citrate-modified-PEDOT:PSS hole transporting layer for performance enhancement in inverted planar perovskite solar cells

A. A. Syed, C. Y. Poon, H. W. Li and F. Zhu, J. Mater. Chem. C, 2019, 7, 5260 DOI: 10.1039/C8TC06043F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements