Controlled local orientation of 2D nanomaterials in 3D devices: methods and prospects for multifunctional designs and enhanced performance

Hongying He, Lizhi Guan and Hortense Le Ferrand

J. Mater. Chem. A, 2022, 10, 19129
DOI: 10.1039/D2TA01926D

A novel CuFe2O4 ink for the fabrication of low-temperature ceramic fuel cell cathodes through inkjet printing

Sanaz Zarabi Golkhatmi, Peter D. Lund and Muhammad Imran Asghar

Mater. Adv., 2024, 5, 143
DOI: 10.1039/D3MA00352C

Novel solution synthesis of the overlooked cubic phase Cu2GeTe3 nanocrystals for optoelectronic devices

Wenliang Wang, Yutong Zhao, Mengxue Liu, Wenqian Zhang, Wenxiu Zhang, Mengqi Tang, Wenling Feng, Xue Sun, Yingqi Song, Menglin Yi and Weihua Wang

Dalton Trans., 2022, 51, 5792
DOI: 10.1039/D1DT04307B

Printing thermoelectric inks toward next-generation energy and thermal devices

Minxiang Zeng, Duncan Zavanelli, Jiahao Chen, Mortaza Saeidi-Javash, Yipu Du, Saniya LeBlanc, G. Jeffrey Snyder and Yanliang Zhang

Chem. Soc. Rev., 2022, 51, 485
DOI: 10.1039/D1CS00490E

Machine learning-assisted 3D printing of thermoelectric materials of ultrahigh performances at room temperature

Kaidong Song, Guoyue Xu, Ali Newaz Mohammad Tanvir, Ke Wang, Md Omarsany Bappy, Haijian Yang, Wenjie Shang, Le Zhou, Alexander W. Dowling, Tengei Luo and Yanliang Zhang

J. Mater. Chem. A, 2024, 12, 21243
DOI: 10.1039/D4TA03062A

Scalable nanomanufacturing of chalcogenide inks: a case study on thermoelectric V–VI nanoplates

Minxiang Zeng, Hongyao Xie, Mortaza Saeidi-Javash, A.N.M. Tanvir, Yipu Du, Jiahao Chen, Mercouri G. Kanatzidis and Yanliang Zhang

J. Mater. Chem. A, 2021, 9, 22555
DOI: 10.1039/D1TA05858D

Additive electronics manufacturing via droplet jetting technologies: materials, methods, applications, and opportunities

Ethan B. Secor, Daniel Yeboah and Livio Gamba

Nanoscale, 2025, 17, 18997
DOI: 10.1039/D5NR02110C

Advances in the design of bio-organic resistive switching memory

Muhammad Awais, Yi Sheng Wong, Feng Zhao and Kuan Yew Cheong

J. Mater. Chem. C, 2026
DOI: 10.1039/D6TC00622A

Direct ink writing of energy materials

S. Tagliaferri, A. Panagiotopoulos and C. Mattevi

Mater. Adv., 2021, 2, 540
DOI: 10.1039/D0MA00753F

3D-printed lattice structures for thermoelectric devices – a review

Spyridon N. Katsantonis and Christos Tsamis

J. Mater. Chem. A, 2025, 13, 27794
DOI: 10.1039/D5TA01722J

Graphitic carbon nitride nanotubes: a new material for emerging applications

Oleksandr Stroyuk, Oleksandra Raievska and Dietrich R. T. Zahn

RSC Adv., 2020, 10, 34059
DOI: 10.1039/D0RA05580H

Nano-to-meso structure of cellulose nanocrystal phases in ethylene–glycol–water mixtures

David Attia, Neta Cohen, Guy Ochbaum, Yael Levi-Kalisman, Ronit Bitton and Rachel Yerushalmi-Rozen

Soft Matter, 2020, 16, 8444
DOI: 10.1039/D0SM01025A

Printed aerogels: chemistry, processing, and applications

Junzong Feng, Bao-Lian Su, Hesheng Xia, Shanyu Zhao, Chao Gao, Lukai Wang, Osarenkhoe Ogbeide, Jian Feng and Tawfique Hasan

Chem. Soc. Rev., 2021, 50, 3842
DOI: 10.1039/C9CS00757A

Engineered two-dimensional nanomaterials: an emerging paradigm for water purification and monitoring

Minxiang Zeng, Mingfeng Chen, Dali Huang, Shijun Lei, Xuan Zhang, Ling Wang and Zhengdong Cheng

Mater. Horiz., 2021, 8, 758
DOI: 10.1039/D0MH01358G

Unravelling the intricacies of solvents and sulfur sources in colloidal synthesis of metal sulfide semiconductor nanocrystals

Vincent Mauritz and Ryan W. Crisp

J. Mater. Chem. C, 2024, 12, 11319
DOI: 10.1039/D4TC01414F

Prospective advances in MXene inks: screen printable sediments for flexible micro-supercapacitor applications

Jalal Azadmanjiri, Thuniki Naveen Reddy, Bahareh Khezri, Lukáš Děkanovský, Abhilash Karuthedath Parameswaran, Bhupender Pal, Saeed Ashtiani, Shuangying Wei and Zdeněk Sofer

J. Mater. Chem. A, 2022, 10, 4533
DOI: 10.1039/D1TA09334G

Advanced supramolecular design for direct ink writing of soft materials

Miao Tang, Zhuoran Zhong and Chenfeng Ke

Chem. Soc. Rev., 2023, 52, 1614
DOI: 10.1039/D2CS01011A

Templating synthesis of natural cotton-based hierarchically structured carbon hollow microfibers for high-performance solar vapor generation

Shijun Lei, Dali Huang, Shuhao Liu, Mingfeng Chen, Rong Ma, Minxiang Zeng, Dan Li, Wenchao Ma, Ling Wang and Zhengdong Cheng

J. Mater. Chem. A, 2021, 9, 15346
DOI: 10.1039/D1TA02117F

Feedback Controlled Reconfiguration of Ellipsoidal Colloids between Interfacial Liquid, Nematic, and Crystal States

Lechuan Zhang, Michelle Sandag, Alec Pellicciotti and Michael A. Bevan

ACS Appl. Mater. Interfaces, 2025, 17, 61477
DOI: 10.1021/acsami.5c15509

Additive manufacturing of thermoelectric materials: materials, synthesis and manufacturing: a review

Jiang Bi, Zeqi Liu, Bo Li, Shide Li, Zhuoyun Yang, Mikhail Dmitrievich Starostenkov and Guojiang Dong

J Mater Sci, 2024, 59, 359
DOI: 10.1007/s10853-023-08953-y

Drying-oriented resolution optimization for multi-material additive manufacturing: A case study on coffee-ring effect

Ningji Wei, Hur-E-Jannat Moni, Qiang Jiang, Yanliang Zhang and Minxiang Zeng

Additive Manufacturing, 2025, 97, 104609
DOI: 10.1016/j.addma.2024.104609

Development and characterization of highly stable electrode inks for low-temperature ceramic fuel cells

Sanaz Zarabi Golkhatmi, Muhammad Imran Asghar and Peter D. Lund

Journal of Power Sources, 2022, 552, 232263
DOI: 10.1016/j.jpowsour.2022.232263

Additive Manufacturing of Magnetic Materials for Energy, Environment, Healthcare, and Industry Applications

Bahareh Rezaei, Hur‐E‐Jannat Moni, Ioannis H. Karampelas, Arjun Sharma, Shahriar Mostufa, Ebrahim Azizi, Xiaolong Liu, Minxiang Zeng, Jenifer Gómez‐Pastora, Rui He and Kai Wu

Adv Funct Materials, 2025, 35
DOI: 10.1002/adfm.202416823

New Directions for Thermoelectrics: A Roadmap from High‐Throughput Materials Discovery to Advanced Device Manufacturing

Kaidong Song, Ali Newaz Mohammad Tanvir, Md Omarsany Bappy and Yanliang Zhang

Small Science, 2025, 5
DOI: 10.1002/smsc.202300359

Modification of Commercial 3D Fused Deposition Modeling Printer for Extrusion Printing of Hydrogels

Semyon I. Koltsov, Tatiana G. Statsenko and Sofia M. Morozova

Polymers, 2022, 14, 5539
DOI: 10.3390/polym14245539

High‐Throughput and Combinatorial Approaches for the Development of Multifunctional Polymers

Stefan Baudis and Marc Behl

Macromol. Rapid Commun., 2022, 43
DOI: 10.1002/marc.202100400

Design of nanocatalyst for electrode structure: Electrophoretic deposition of iron phosphide nanoparticles to produce a highly active hydrogen evolution reaction catalyst

Yoonsu Park, Hoyoung Kim, Taegyeom Lee, Yun-Kun Hong, Wooseok Jeong, Soo-Kil Kim and Don-Hyung Ha

Chemical Engineering Journal, 2022, 431, 133217
DOI: 10.1016/j.cej.2021.133217

Machine learning-enabled feature classification of evaporation-driven multi-scale 3D printing

Samannoy Ghosh, Marshall V Johnson, Rajan Neupane, James Hardin, John Daniel Berrigan, Surya R Kalidindi and Yong Lin Kong

Flex. Print. Electron., 2022, 7, 014011
DOI: 10.1088/2058-8585/ac518a

Facile Synthesis of Novel Short-Chain Ligand-Capped Colloidal Metal Oxide Nanoparticles for Printed Flexible Devices

Yusuke Otsuka, Hiroyuki Kondo and Keigo Suzuki

ACS Appl. Mater. Interfaces, 2024, 16, 36567
DOI: 10.1021/acsami.4c04975

A comprehensive review on monitoring and purification of water through tunable 2D nanomaterials

F. O. Areche, C. M. C. Mamani, J. A. L. Cárdenas, L. A. Sumarriva-Bustinza, P. A. P. Pastrana, M. S. Porras-Roque, M. A. C. Huayapa, C. Y. H. Zea, O. G. V. Rios, J. E. S. Montes, E. N. Paitan-Anticona, N. L. Chávez-Sumarriva, A. A. M. Paucarmayta, V. G. S. Araujo, M. H. M. Paucarmayta, S. M. Carrasco, R. J. M. Yapias and D.C. Paricanaza-Ticona

Braz. J. Biol., 2023, 83
DOI: 10.1590/1519-6984.273843

Structural, microstructural, chemical, and optical properties of NiO nanocrystals and films obtained by 3D printing

S. Kakherskyi, R. Pshenychnyi, O. Dobrozhan, Ja. G. Vaziev, A. P. Bukivskii, P. M. Bukivskij, Yu. P. Gnatenko and A. Opanasyuk

Appl. Phys. A, 2021, 127
DOI: 10.1007/s00339-021-04847-5

Light source dependence on quantitative measurement for dispersibility of dark-colored colloidal dispersions

Kento Kojiro, Kanako Akagi, Asami Ohtake and Koichi Sakaguchi

Jpn. J. Appl. Phys., 2024, 63, 11SP10
DOI: 10.35848/1347-4065/ad8c4e

Polymer-based conductive ink: a comprehensive review

Shaista Fatima, Salaman Ahamad, Narayan Chandra Mishra and Kirtiraj K. Gaikwad

Polym. Bull., 2025, 82, 5275
DOI: 10.1007/s00289-025-05760-0

Advancements in Therapeutics via 3D Printed Multifunctional Architectures from Dispersed 2D Nanomaterial Inks

Pritam K. Chakraborty, Jalal Azadmanjiri, Chokkakula L. P. Pavithra, Xiaojian Wang, Syed H. Masood, Suhash Ranjan Dey and James Wang

Small, 2020, 16
DOI: 10.1002/smll.202004900

Enhancing stability in nano-CaCO3 completion fluids via controlled gelation: Insights from in situ light scattering analysis

Hanshi Zhang, Zhiliang Zhao, He Shi, Rentong Liu, Xiaobo Cui, Junhui He and Hua Tian

Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2026, 733, 139293
DOI: 10.1016/j.colsurfa.2025.139293

Integration of surface modified aqueous ink for multi-functional material extrusion

Xi Xu, Junyuan He, Yuemeng Li, Gangwen Fu, Qinghe Cao, Danwei Zhang, Yong Hao Tan, Ming Gao, Weihao Li, Chaojiang Li, Win Jonhson, Shuning Xiao and Jun Ding

Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2023, 664, 131137
DOI: 10.1016/j.colsurfa.2023.131137

Ink synthesis and inkjet printing of manganese electrodes on laser textured aluminium foil: The effect of laser texturing parameters on surface roughness and printability

Anesu Nyabadza, Suman Chatterjee, Suganya Pitchai Muthusamy, Sean Ryan, Jesus Inocente Medina Santos, Valeria Nicolosi, Dermot Brabazon and Mercedes Vazquez

Journal of Materials Research and Technology, 2025, 37, 4514
DOI: 10.1016/j.jmrt.2025.07.120

Recent progress in 3D printing of Bi2Te3-based thermoelectric materials and devices

S E Yang, H Han and J S Son

J. Phys. Energy, 2024, 6, 022003
DOI: 10.1088/2515-7655/ad3983

Observation of Distribution of π-Orbital-Oriented Domains in PAN- and Pitch-Based Carbon Fibers Using Scanning Transmission X-ray Microscopy

Takayuki Harano, Yasuo Takeichi, Masafumi Usui, Yutaka Arai, Reiko Murao, Noriyuki Negi and Masao Kimura

Applied Sciences, 2020, 10, 4836
DOI: 10.3390/app10144836

High-Performance Temperature Sensor by Employing Screen Printing Technology

Zhaojun Liu, Bian Tian, Bingfei Zhang, Zhongkai Zhang, Jiangjiang Liu, Libo Zhao, Peng Shi, Qijing Lin and Zhuangde Jiang

Micromachines, 2021, 12, 924
DOI: 10.3390/mi12080924

3D microprinting of inorganic porous materials by chemical linking-induced solidification of nanocrystals

Minju Song, Yoonkyum Kim, Du San Baek, Ho Young Kim, Da Hwi Gu, Haiyang Li, Benjamin V. Cunning, Seong Eun Yang, Seung Hwae Heo, Seunghyun Lee, Minhyuk Kim, June Sung Lim, Hu Young Jeong, Jung-Woo Yoo, Sang Hoon Joo, Rodney S. Ruoff, Jin Young Kim and Jae Sung Son

Nat Commun, 2023, 14
DOI: 10.1038/s41467-023-44145-7

In Silico Identification and Validation of Organic Triazole Based Ligands as Potential Inhibitory Drug Compounds of SARS-CoV-2 Main Protease

Vishma Pratap Sur, Madhab Kumar Sen and Katerina Komrskova

Molecules, 2021, 26, 6199
DOI: 10.3390/molecules26206199

Direct ink writing of conductive materials for emerging energy storage systems

Ting Huang, Wenfeng Liu, Chenliang Su, Ya-yun Li and Jingyu Sun

Nano Res., 2022, 15, 6091
DOI: 10.1007/s12274-022-4200-2

Synthetic Polymers for Organ 3D Printing

Fan Liu and Xiaohong Wang

Polymers, 2020, 12, 1765
DOI: 10.3390/polym12081765

(INVITED) Lighting-up nanocarbons through hybridization: Optoelectronic properties and perspectives

Silvio Osella, Mengjiao Wang, Enzo Menna and Teresa Gatti

Optical Materials: X, 2021, 12, 100100
DOI: 10.1016/j.omx.2021.100100

Photoluminescent Janus oxazolidine nanoparticles for development of organic light-emitting diodes, anticounterfeiting, information encryption, and optical detection of scratch

Amin Abdollahi, Negar Hanaei, Mobin Rahmanidoust and Ali Dashti

Journal of Colloid and Interface Science, 2023, 630, 242
DOI: 10.1016/j.jcis.2022.10.013

One‐Meter‐Long, All‐3D‐Printed Supercapacitor Fibers Based on Structurally Engineered Electrode for Wearable Energy Storage

Manoj Mayaji Ovhal, Hock Beng Lee, Vinayak Vitthal Satale, Barkha Tyagi, Sagnik Chowdhury and Jae‐Wook Kang

Advanced Energy Materials, 2024, 14
DOI: 10.1002/aenm.202303053

Self-Sustained Autonomous Wireless Sensor Network with Integrated Solar Photovoltaic System for Internet of Smart Home-Building (IoSHB) Applications

Md. Rokonuzzaman, Mahmuda Khatun Mishu, Nowshad Amin, Mithulananthan Nadarajah, Rajib Baran Roy, Kazi Sajedur Rahman, Adamu Muhammad Buhari, Shuza Binzaid, Mohammad Shakeri and Jagadeesh Pasupuleti

Micromachines, 2021, 12, 653
DOI: 10.3390/mi12060653

Revealing Optical Properties of Amorphous Two-Dimensional Colloidal Nanosheets for Altering Nanochannels

Rahul Singh, Seung-Young Choi, Sungmin Cho and Majid Shahbabaei

ACS Sustainable Chem. Eng., 2020, 8, 17133
DOI: 10.1021/acssuschemeng.0c05248

Solution-Processable and Printable Two-Dimensional Transition Metal Dichalcogenide Inks

Yongping Dai, Qiyuan He, Yu Huang, Xiangfeng Duan and Zhaoyang Lin

Chem. Rev., 2024, 124, 5795
DOI: 10.1021/acs.chemrev.3c00791

Ink‐Based Additive Nanomanufacturing of Functional Materials for Human‐Integrated Smart Wearables

Shujia Xu and Wenzhuo Wu

Advanced Intelligent Systems, 2020, 2
DOI: 10.1002/aisy.202000117

Fabrication of thin film composite polyamide membrane for water purification via inkjet printing of aqueous and solvent inks

Myoung Jun Park, Chen Wang, Ralph Rolly Gonzales, Sherub Phuntsho, Hideto Matsuyama, Enrico Drioli and Ho Kyong Shon

Desalination, 2022, 541, 116027
DOI: 10.1016/j.desal.2022.116027

Printed transistors made of 2D material-based inks

Silvia Conti, Gabriele Calabrese, Khaled Parvez, Lorenzo Pimpolari, Francesco Pieri, Giuseppe Iannaccone, Cinzia Casiraghi and Gianluca Fiori

Nat Rev Mater, 2023, 8, 651
DOI: 10.1038/s41578-023-00585-7

Patterned microarrays or nanoscale assemblies for optical sensing of biomarkers

Xiaohui Lu and Zheng Li

TrAC Trends in Analytical Chemistry, 2024, 179, 117873
DOI: 10.1016/j.trac.2024.117873

Dispersion strategies of nanomaterials in polymeric inks for efficient 3D printing of soft and smart 3D structures: A systematic review

Mahdiyar Shahbazi, Henry Jäger, Rammile Ettelaie, Jianshe Chen, Peyman Asghartabar Kashi and Adeleh Mohammadi

Advances in Colloid and Interface Science, 2024, 333, 103285
DOI: 10.1016/j.cis.2024.103285

Universal mobility characteristics of graphene originating from charge scattering by ionised impurities

Jonathan H. Gosling, Oleg Makarovsky, Feiran Wang, Nathan D. Cottam, Mark T. Greenaway, Amalia Patanè, Ricky D. Wildman, Christopher J. Tuck, Lyudmila Turyanska and T. Mark Fromhold

Commun Phys, 2021, 4
DOI: 10.1038/s42005-021-00518-2

4D Printing of Electroactive Materials

Andrew Y. Chen, Elizabeth Pegg, Ailin Chen, Zeqing Jin and Grace X. Gu

Advanced Intelligent Systems, 2021, 3
DOI: 10.1002/aisy.202100019

Solution processing for colloidal nanoparticle thin film: From fundamentals to applications

Wooseok Jeong, Hyeonseok Lee, Yun Jae Hwang, Boeun An, Yeongbin Lee, Heesoo Jeong, Gyuhyeon Kim, Yoonsu Park, Minyoung Kim and Don-Hyung Ha

Advances in Colloid and Interface Science, 2025, 342, 103538
DOI: 10.1016/j.cis.2025.103538

Multi-material additive manufacturing of energy storage and conversion devices: Recent progress and future prospects

Naimul Arefin, Hur-E-Jannat Moni, David Espinosa, Weilong Cong and Minxiang Zeng

Applied Physics Reviews, 2025, 12
DOI: 10.1063/5.0235864

Autonomous Aerosol and Plasma Co‐Jet Printing of Metallic Devices at Ambient Temperature

Yipu Du, Jinyu Yang, Kaidong Song, Qiang Jiang, Md Omarsany Bappy, Yuchen Zhu, David B. Go and Yanliang Zhang

Small, 2025, 21
DOI: 10.1002/smll.202409751

Advancements in MXene-based 3D printing-based technologies

Ali Asghar, Muhammad Shahid Rashid, Muhammad Hanif, Imed Boukhris, Zhangwei Chen, Muhammad Saqib, Qumail Arshad, P. Rosaiah, Saood Ali and Iftikhar Hussain

Chemical Engineering Journal, 2025, 506, 159811
DOI: 10.1016/j.cej.2025.159811

A General Ink Formulation Strategy for Transforming Recycled Metals into Printed Electronics

Naimul Arefin, Gray Podolak, Hur‐E‐Jannat Moni and Minxiang Zeng

Adv Materials Technologies, 2025, 10
DOI: 10.1002/admt.202500526

Additive manufacturing solidification methodologies for ink formulation

Xi Xu, Jiayu Yang, Win Jonhson, Yuxuan Wang, Ady Suwardi, Jun Ding, Cao Guan and Danwei Zhang

Additive Manufacturing, 2022, 56, 102939
DOI: 10.1016/j.addma.2022.102939

The Study of the Dispersity of Gold Aerosols with the Use of Au–AOT Composite Films

A. N. Kolodin, I. V. Korostova, E. A. Maksimovskiy, A. T. Arymbaeva and A. I. Bulavchenko

Colloid J, 2020, 82, 529
DOI: 10.1134/S1061933X20050099

Inkjet and Extrusion Printing for Electrochemical Energy Storage: A Minireview

Peihua Yang and Hong Jin Fan

Adv Materials Technologies, 2020, 5
DOI: 10.1002/admt.202000217

Thickness-Dependent Permeation Properties of Quenched and Standard Laser-Sintered Polyamide 12 Sheets

Anna Liebrich, Horst-Christian Langowski and Bernd R. Pinzer

Polymers, 2021, 13, 603
DOI: 10.3390/polym13040603

Digital fabrication of colors with colloidal crystals and colloidal glasses

Rahul Karyappa, Deepshikha Arora, Tzee Luai Meng, Qiang Zhu, Joel Yang and Hongfei Liu

Next Nanotechnology, 2024, 6, 100062
DOI: 10.1016/j.nxnano.2024.100062

Metallic nanoparticle inks for flexible printed electronics

Ruimin Cai, Cunman Liang, Yongqing Duan, Zhijun Zhao, Xi Zhang, Pei He, JunLiang Yang, Wen‐Yong Lai, Jun Wei and Liang Tian

FlexMat, 2025, 2, 225
DOI: 10.1002/flm2.40

Zwitterionic Graphene Quantum Dots to Stabilize Pickering Emulsions for Controlled-Release Applications

Rong Ma, Minxiang Zeng, Dali Huang and Qingsheng Wang

ACS Appl. Mater. Interfaces, 2022, 14, 7486
DOI: 10.1021/acsami.1c23226

Active learning based reverse design of hydrogen production from biomass fuel

Xin Zheng and Guozhu Jia

Fuel, 2024, 357, 129948
DOI: 10.1016/j.fuel.2023.129948

Printed Electronics Based on 2D Material Inks: Preparation, Properties, and Applications toward Memristors

Xiaopei Chen, Xiongfeng Wang, Yudong Pang, Guocheng Bao, Jie Jiang, Peng Yang, Yuankang Chen, Tingke Rao and Wugang Liao

Small Methods, 2023, 7
DOI: 10.1002/smtd.202201156

Predicting Extensional Behaviors of Colloidal Inks from Shear-Based Models for Direct Ink Writing

M. Naimul Hoque and Gordon F. Christopher

J. of Materi Eng and Perform, 2025, 34, 22475
DOI: 10.1007/s11665-025-10828-z

Nanopore sensing and beyond: Electrochemical systems for optically-coupled single-entity studies, stimulus-responsive gating applications, and point-of-care sensors

Julius Reitemeier, Jarek Metro and Kaiyu X. Fu

Sensors and Actuators Reports, 2024, 8, 100225
DOI: 10.1016/j.snr.2024.100225

Enhancing Thermal Conductivity and Phase Change Stability in Polyethylene Glycol Composites via Aspect Ratio Engineering of Boron Nitride Nanosheets

Taeyoung Jeong, Kiwon Kim, Haekyun Park, Chang‐Min Yoon and Myeongjin Kim

Small Structures, 2025, 6
DOI: 10.1002/sstr.202500296

Converging 2D Nanomaterials and 3D Bioprinting Technology: State‐of‐the‐Art, Challenges, and Potential Outlook in Biomedical Applications

Hadi Rastin, Negar Mansouri, Tran Thanh Tung, Kamrul Hassan, Arash Mazinani, Mahnaz Ramezanpour, Pei Lay Yap, Le Yu, Sarah Vreugde and Dusan Losic

Adv Healthcare Materials, 2021, 10
DOI: 10.1002/adhm.202101439

A review of high-end display technologies focusing on inkjet printed manufacturing

Rifat Kaçar, Ramis Berkay Serin, Esin Uçar and Alper Ülkü

Materials Today Communications, 2023, 35, 105534
DOI: 10.1016/j.mtcomm.2023.105534

3D-printed construct from hybrid suspension as spatially and temporally controlled protein delivery system

Jiangtao Wang, Baojun Xie, Zicai Zhu, Guijun Xie and Bin Luo

J Biomater Appl, 2021, 36, 264
DOI: 10.1177/08853282211023257

Accelerated Design of Catalytic Water-Cleaning Nanomotors via Machine Learning

Minxiang Zeng, Shuai Yuan, Dali Huang and Zhengdong Cheng

ACS Appl. Mater. Interfaces, 2019, 11, 40099
DOI: 10.1021/acsami.9b14792

A Review on Printing of Responsive Smart and 4D Structures Using 2D Materials

Pietro Cataldi, Mufeng Liu, Mark Bissett and Ian A. Kinloch

Adv Materials Technologies, 2022, 7
DOI: 10.1002/admt.202200025

Protocol for preparing patterned superlattice structures by printing assembly technology for multi-channel detection

Weidong Zhao, Jin Ren, Min Zhang, Zhenjie Xue and Tie Wang

STAR Protocols, 2023, 4, 102704
DOI: 10.1016/j.xpro.2023.102704

Rheology-controlled microlithography of exceptionally stable perovskite nanocrystals for microdisplays

Sang Woo Bae, Jinmin Park, Junho Jang, Seong Woo Hong, Hyukmin Kweon, Su Hwan Lee, Yongmin Shin, Ganggyu Lee, Huitae Yang, Jaekwang Kim, Jihoon Lee, Bongjun Yeom, Ungyu Paik, Yei Hwan Jung, Byeong-Soo Bae, Do Hwan Kim and Young-Hoon Kim

Nano Energy, 2025, 143, 111326
DOI: 10.1016/j.nanoen.2025.111326

Continuous structural deformation of graphene oxide liquid crystal colloids under shear for hydrogel films

Yul Hui Shim and So Youn Kim

Carbon, 2023, 202, 358
DOI: 10.1016/j.carbon.2022.11.003

Inkjet printed single walled carbon nanotube as an interlayer for high performance thin film composite nanofiltration membrane

Myoung Jun Park, Chen Wang, Dong Han Seo, Ralph Rolly Gonzales, Hideto Matsuyama and Ho Kyong Shon

Journal of Membrane Science, 2021, 620, 118901
DOI: 10.1016/j.memsci.2020.118901

Printable conductive inks used for the fabrication of electronics: an overview

Evgenia Dimitriou and Nikolaos Michailidis

Nanotechnology, 2021, 32, 502009
DOI: 10.1088/1361-6528/abefff

Green Fabrication of Thin Film Composite Polyamide Membrane for Water Purification Via Inkjet Printing Technology

Myoung Jun Park, Chen Wang, Ralph Rolly Gonzales, Sherub Phuntsho, Hideto Matsuyama, Enrico Drioli and Ho Kyong Shon

SSRN Journal, 2022
DOI: 10.2139/ssrn.4060800

Current Potential Therapeutic Approaches against SARS-CoV-2: A Review

Dharmendra Kumar Yadav, Desh Deepak Singh, Ihn Han, Yogesh Kumar and Eun-Ha Choi

Biomedicines, 2021, 9, 1620
DOI: 10.3390/biomedicines9111620

Fibrillar biocompatible colloidal gels based on cellulose nanocrystals and poly(N-isopropylacrylamide) for direct ink writing

Anastasia A. Belyaeva, Ilya V. Tretyakov, Alexey V. Kireynov, Yuliya A. Nashchekina, Vitaliy I. Solodilov, Evgenia G. Korzhikova-Vlakh and Sofia M. Morozova

Journal of Colloid and Interface Science, 2023, 635, 348
DOI: 10.1016/j.jcis.2022.12.106

Colloidal Inorganic Ligand-Capped Nanocrystals: Fundamentals, Status, and Insights into Advanced Functional Nanodevices

Wenran Wang, Meng Zhang, Zhenxiao Pan, Gill M. Biesold, Shuang Liang, Huashang Rao, Zhiqun Lin and Xinhua Zhong

Chem. Rev., 2022, 122, 4091
DOI: 10.1021/acs.chemrev.1c00478

A comprehensive review of additive manufacturing techniques for conductive polymeric composites in energy storage applications

Reza Sedaghat, Seyed Amirreza Zareian, Sasan Sattarpanah Karganroudi and Mazeyar Parvinzadeh Gashti

Journal of Energy Storage, 2026, 151, 120392
DOI: 10.1016/j.est.2026.120392

Colloidal Clusters and Networks Formed by Oppositely Charged Nanoparticles with Varying Stiffnesses

Sofia M. Morozova, Leticia López-Flores, Albert Gevorkian, Honghu Zhang, Vahid Adibnia, Weiqing Shi, Dmytro Nykypanchuk, Tatiana G. Statsenko, Gilbert C. Walker, Oleg Gang, Monica Olvera de la Cruz and Eugenia Kumacheva

ACS Nano, 2023, 17, 15012
DOI: 10.1021/acsnano.3c04064

Tailoring the structural and non-linear optical properties of TiO2 nanoparticles via solvent-directed green synthesis

Prakash Nandi, Dimishree Neog, Rajib Biswas and Nirmal Mazumder

Discov Mater, 2026, 6
DOI: 10.1007/s43939-025-00511-4

Hybrid printing of wearable piezoelectric sensors

Yipu Du, Ruoxing Wang, Minxiang Zeng, Shujia Xu, Mortaza Saeidi-Javash, Wenzhuo Wu and Yanliang Zhang

Nano Energy, 2021, 90, 106522
DOI: 10.1016/j.nanoen.2021.106522

Implementation of succinylated lactoferrin-luteolin nanocomplex-based 3D printing inks in nutritional and textural customization for dysphagia diets: Printing mechanism, improved bioactivity and in vitro bioaccessibility

Tianzhu Guan, Chenxi Ren, Yining Feng, Ya Gao, Qingling Wang, Shengqi Rao, Lixia Xiao, Zhenquan Yang and Qiaoquan Liu

LWT, 2024, 214, 117115
DOI: 10.1016/j.lwt.2024.117115

Printing large-scale nanoparticle superlattices for multichannel detection

Weidong Zhao, Haochen Ye, Xiao Li, Jiaxing Liu, Xinyuan Zhou, Xiangyu Chen, Zhenjie Xue, Zhou Yang and Tie Wang

Chem, 2023, 9, 2194
DOI: 10.1016/j.chempr.2023.03.031

2D materials inks toward smart flexible electronics

Oyawale Adetunji Moses, Libo Gao, Haitao Zhao, Zhuo Wang, Mukhtar Lawan Adam, Zhehao Sun, Kaili Liu, Jiahong Wang, Yang Lu, Zongyou Yin and Xuefeng Yu

Materials Today, 2021, 50, 116
DOI: 10.1016/j.mattod.2021.08.010

Wearable Printed Temperature Sensors: Short Review on Latest Advances for Biomedical Applications

Saleem Khan, Shaukat Ali, Arshad Khan and Amine Bermak

IEEE Rev. Biomed. Eng., 2023, 16, 152
DOI: 10.1109/RBME.2021.3121480

Advancements and challenges in printed thermoelectrics

Huangshui Ma, Ting Lu, Xiao-Lei Shi, Meng Li, Siqi Huo, Pingan Song, Zhi-Gang Chen and Min Hong

Progress in Materials Science, 2026, 158, 101619
DOI: 10.1016/j.pmatsci.2025.101619

Alternative Sintering Processes and Their Influence on the Electrical Resistance of Printed Ag Nanoparticle Conductive Networks

Gray Podolak, Naimul Arefin, Hur-E-Jannat Moni and Minxiang Zeng

ACS Appl. Electron. Mater., 2024, 6, 8590
DOI: 10.1021/acsaelm.3c01848

Laser Sintering Direct Ink Write Silver Nanoflake Ink for On-Demand Manufacturing of Electronics in Space

Ellie Schlake and Nirmala Kandadai

IEEE Flex. Electron., 2024, 3, 242
DOI: 10.1109/JFLEX.2024.3384331

Current progress of 4D-printing technology

Balakrishnan Subeshan, Yeshaswini Baddam and Eylem Asmatulu

Prog Addit Manuf, 2021, 6, 495
DOI: 10.1007/s40964-021-00182-6

Temperature and gate-bias-dependent charge transport in inkjet-printed polymer field-effect transistor

Jiyoul Lee, Jaeman Jang, Jong Won Chung, Minho Yoon and Dae Hwan Kim

J. Korean Phys. Soc., 2021, 79, 1063
DOI: 10.1007/s40042-021-00335-4

The role of reverse micelles and metal-surfactant interactions in the synthesis of gold ink in reverse emulsions stabilized by AOT, Tergitol NP-4 and Span 80

Tatyana Yu. Podlipskaya, Nikita O. Shaparenko, Marina G. Demidova, Olga A. Bulavchenko and Alexander I. Bulavchenko

Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2022, 649, 129452
DOI: 10.1016/j.colsurfa.2022.129452

Self‐Adaptive Magnetic Photonic Nanochain Cilia Arrays

Lei Kong, Yizheng Feng, Wei Luo, Fangzhi Mou, Kaili Ying, Yu Pu, Ming You, Kai Fang, Huiru Ma and Jianguo Guan

Adv Funct Materials, 2020, 30
DOI: 10.1002/adfm.202005243

Liquid Metals‐Assisted Synthesis of Scalable 2D Nanomaterials: Prospective Sediment Inks for Screen‐Printed Energy Storage Applications

Jalal Azadmanjiri, Naveen Reddy Thuniki, Fabrizio Guzzetta and Zdeněk Sofer

Adv Funct Materials, 2021, 31
DOI: 10.1002/adfm.202010320

Embedded Transducers in Polymeric Coatings on Metallic Substrates

Wolfgang Hilber, Herbert Enser, Marcel Knoll, Christina Offenzeller and Bernhard Jakoby

IEEE Sensors J., 2021, 21, 12444
DOI: 10.1109/JSEN.2021.3057664

Carbon based hybrid nanomaterials: overview and challenges ahead

O. Yu. Semchuk, T. Gatti and S. Osella

Poverhn., 2022, 14(29), 78
DOI: 10.15407/Surface.2022.14.078

pH, Nanosheet Concentration, and Antioxidant Affect the Oxidation of Ti3C2Tx and Ti2CTx MXene Dispersions

Xiaofei Zhao, Aniruddh Vashisth, Jackson W. Blivin, Zeyi Tan, Dustin E. Holta, Vrushali Kotasthane, Smit A. Shah, Touseef Habib, Shuhao Liu, Jodie L. Lutkenhaus, Miladin Radovic and Micah J. Green

Adv Materials Inter, 2020, 7
DOI: 10.1002/admi.202000845

Printing and patterning of clay-based nanocomposites for healthcare and sustainable applications

Naimul Arefin, Gray Podolak, Joshua Lewis-Sandy and Minxiang Zeng

MRS Communications, 2023, 13, 980
DOI: 10.1557/s43579-023-00449-9

Two dimensional (2D) materials and biomaterials for water desalination; structure, properties, and recent advances

Saleem Raza, Ehsan Ghasali, Yasin Orooji, Hongjun Lin, Ceren Karaman, Elena Niculina Dragoi and Nevin Erk

Environmental Research, 2023, 219, 114998
DOI: 10.1016/j.envres.2022.114998

Applications of four-dimensional printing in emerging directions: Review and prospects

Jinjian Huang, Shaojun Xia, Zongan Li, Xiuwen Wu and Jianan Ren

Journal of Materials Science & Technology, 2021, 91, 105
DOI: 10.1016/j.jmst.2021.02.040

A nanoparticle-mist deposition method: fabrication of high-performance ITO flexible thin films under atmospheric conditions

Ryoko Suzuki, Yasutaka Nishi, Masaki Matsubara, Atsushi Muramatsu and Kiyoshi Kanie

Sci Rep, 2021, 11
DOI: 10.1038/s41598-021-90028-6

Oozing control and retraction in colloid 3D printing: parametric analysis

Mohammed Al-Ali and Yara Almubarak

Prog Addit Manuf, 2025, 10, 5217
DOI: 10.1007/s40964-024-00898-1

All-printed WO3 films on an Ag-interdigitated electrode derived from aqueous screen-printable inks for room-temperature ammonia gas detection

Lakkimsetti Lakshmi Praveen, Nitesh Pratap Singh, Robbi Vivek Vardhan and Saumen Mandal

Flex. Print. Electron., 2025, 10, 015008
DOI: 10.1088/2058-8585/adb1f1

Multicolored Nanocolloidal Hydrogel Inks

Sofia M. Morozova, Tatiana G. Statsenko, Egor O. Ryabchenko, Albert Gevorkian, Vahid Adibnia, Maksim S. Lozhkin, Alexey V. Kireynov and Eugenia Kumacheva

Adv Funct Materials, 2021, 31
DOI: 10.1002/adfm.202105470

Emulsifier-Free Acrylate-Based Emulsion Prepared by Reverse Iodine Transfer Polymerization

Tao Huang, Qing-Xia Yuan and Shu-Ling Gong

Polymers, 2020, 12, 730
DOI: 10.3390/polym12030730

Colloidal Nanosurfactants for 3D Conformal Printing of 2D van der Waals Materials

Minxiang Zeng, Wenzheng Kuang, Irfan Khan, Dali Huang, Yipu Du, Mortaza Saeidi‐Javash, Lecheng Zhang, Zhengdong Cheng, Anthony J. Hoffman and Yanliang Zhang

Advanced Materials, 2020, 32
DOI: 10.1002/adma.202003081

Inkjet‐printed flexible MXetronics: Present status and future prospects

Rajavel Krishnamoorthy and Suprem R. Das

Applied Research, 2024, 3
DOI: 10.1002/appl.202300085

Recent advance in using eco-friendly carbon-based conductive ink for printed strain sensor: A review

Nur Iffah Irdina Maizal Hairi, Aliza Aini Md Ralib, Anis Nurashikin Nordin, Muhammad Farhan Affendi Mohamad Yunos, Lim Lai Ming, Lun Hao Tung and Zambri Samsudin

Cleaner Materials, 2024, 12, 100248
DOI: 10.1016/j.clema.2024.100248

Laser sintering of electrohydrodynamic inkjet-printed silver in microgravity for in-space manufacturing of electronic devices

Ellie Schlake, Sagar Kumar Verma, Liangkui Jiang, Pengyu Zhang, Hantang Qin and Nirmala Kandadai

npj Adv. Manuf., 2025, 2
DOI: 10.1038/s44334-025-00054-9

Predicting Colloidal Ink 3D Printing Behavior Using Simple Piecewise Power Law Constitutive Model

M. Naimul Hoque, Adolofo Cazares and Gordon F. Christopher

J. of Materi Eng and Perform, 2025, 34, 1301
DOI: 10.1007/s11665-023-09116-5

Preparation of highly loaded copper(II) oxide nanoparticle suspensions for LIFT-printing of electronics

Evgenia Dimitriou and Nikolaos Michailidis

European Journal of Materials, 2024, 4
DOI: 10.1080/26889277.2024.2316918

When physics-informed data analytics outperforms black-box machine learning: A case study in thickness control for additive manufacturing

Ke Wang, Minxiang Zeng, Jialu Wang, Wenjie Shang, Yanliang Zhang, Tengfei Luo and Alexander W. Dowling

Digital Chemical Engineering, 2023, 6, 100076
DOI: 10.1016/j.dche.2022.100076

Four-Dimensional Printing for Hydrogel: Theoretical Concept, 4D Materials, Shape-Morphing Way, and Future Perspectives

Syed Sarim Imam, Afzal Hussain, Mohammad A. Altamimi and Sultan Alshehri

Polymers, 2021, 13, 3858
DOI: 10.3390/polym13213858

Tunable 2D Nanomaterials; Their Key Roles and Mechanisms in Water Purification and Monitoring

Jawaria Fatima, Adnan Noor Shah, Muhammad Bilal Tahir, Tariq Mehmood, Anis Ali Shah, Mohsin Tanveer, Ruqia Nazir, Basit Latief Jan and Saleh Alansi

Front. Environ. Sci., 2022, 10
DOI: 10.3389/fenvs.2022.766743

Tetrahedral CuZnInSe3 nanocrystals: One-pot synthesis, properties, and solar cell application

Dehui Li, Jing Yang, Weichen Qi and Qiao Gao

Journal of Alloys and Compounds, 2021, 854, 157096
DOI: 10.1016/j.jallcom.2020.157096

Structured illumination with thermal imaging (SI-TI): A dynamically reconfigurable metrology for parallelized thermal transport characterization

Qiye Zheng, Divya Chalise, Mingxin Jia, Yuqiang Zeng, Minxiang Zeng, Mortaza Saeidi-Javash, Ali N. M. Tanvir, Gottlieb Uahengo, Sumanjeet Kaur, Javier E. Garay, Tengfei Luo, Yanliang Zhang, Ravi S. Prasher and Chris Dames

Applied Physics Reviews, 2022, 9
DOI: 10.1063/5.0079842

Advancing in-mold electronics: Thermoformable inks for printed alternate-current electroluminescent devices

Rita Polícia, Lia Campos-Arias, Nikola Peřinka, Daniela Maria Correia, José Luis Vilas-Vilela and Senentxu Lanceros-Méndez

Polymer, 2026, 347, 129662
DOI: 10.1016/j.polymer.2026.129662