Controlled local orientation of 2D nanomaterials in 3D devices: methods and prospects for multifunctional designs and enhanced performance

Hongying He, Lizhi Guan and Hortense Le Ferrand

J. Mater. Chem. A, 2022, 10, 19129
DOI: 10.1039/D2TA01926D

3D printed nanocomposites using polymer grafted graphene oxide prepared by multicomponent Passerini reaction

Guannan Wang, Raju Raju, Kiho Cho, Sandy Wong, B. Gangadhara Prusty and Martina H. Stenzel

Polym. Chem., 2020, 11, 7253
DOI: 10.1039/D0PY01286F

Direct ink writing of polyimide aerogels for battery thermal mitigation

Ciera E. Cipriani, Donald A. Dornbusch, Stephanie L. Vivod and Emily B. Pentzer

RSC Appl. Polym., 2024, 2, 71
DOI: 10.1039/D3LP00200D

Scalable synthesis of gyroid-inspired freestanding three-dimensional graphene architectures

Adrian E. Garcia, Chen Santillan Wang, Robert N. Sanderson, Kyle M. McDevitt, Yunfei Zhang, Lorenzo Valdevit, Daniel R. Mumm, Ali Mohraz and Regina Ragan

Nanoscale Adv., 2019, 1, 3870
DOI: 10.1039/C9NA00358D

Direct ink writing of energy materials

S. Tagliaferri, A. Panagiotopoulos and C. Mattevi

Mater. Adv., 2021, 2, 540
DOI: 10.1039/D0MA00753F

Laser-induced graphene: from precursor chemistry to process control and throughput–resolution–performance trade-offs

Zhenhao Wu, Mirza Sahaluddin, Diala Bani Mustafa, Soumalya Ghosh and Mostafa Bedewy

Nanoscale, 2026, 18, 6647
DOI: 10.1039/D5NR04319K

Ultralight and robust carbon nanofiber aerogels for advanced energy storage

Yu Ma, Qiao Liu, Weijun Li, Yapeng Zheng, Qing Shi, Zeyan Zhou, Gang Shao, Weiyou Yang, Ding Chen and Xiaosheng Fang

J. Mater. Chem. A, 2021, 9, 900
DOI: 10.1039/D0TA09466H

3D printed electrodes for efficient membrane capacitive deionization

Sareh Vafakhah, Glenn Joey Sim, Mohsen Saeedikhani, Xiaoxia Li, Pablo Valdivia y Alvarado and Hui Ying Yang

Nanoscale Adv., 2019, 1, 4804
DOI: 10.1039/C9NA00507B

3D printing of cellular materials for advanced electrochemical energy storage and conversion

Xiaocong Tian and Kun Zhou

Nanoscale, 2020, 12, 7416
DOI: 10.1039/D0NR00291G

Printed aerogels: chemistry, processing, and applications

Junzong Feng, Bao-Lian Su, Hesheng Xia, Shanyu Zhao, Chao Gao, Lukai Wang, Osarenkhoe Ogbeide, Jian Feng and Tawfique Hasan

Chem. Soc. Rev., 2021, 50, 3842
DOI: 10.1039/C9CS00757A

Multiscale additive manufacturing of polymers using 3D photo-printable self-assembling ionic liquid monomers

Bineh G. Ndefru, Bryan S. Ringstrand, Sokhna I.-Y. Diouf, Sönke Seifert, Juan H. Leal, Troy A. Semelsberger, Timothy A. Dreier and Millicent A. Firestone

Mol. Syst. Des. Eng., 2019, 4, 580
DOI: 10.1039/C8ME00106E

Synergistic single process additive manufacturing of hydro-responsive Ag nanoparticle composites by digital visible light processing 3D printing

Sokhna I. Y. Diouf, Darrick J. Williams, Alejandra Londoño-Calderon, Michael T. Pettes, Sönke Seifert and Millicent A. Firestone

Mater. Adv., 2020, 1, 2219
DOI: 10.1039/D0MA00549E

Ultra-thick three-dimensional interpenetrating graphene electrode architectures for high volumetric density energy storage

Zhen Wang, Hanyu Li, Daniel Hawthorne, Zhongzheng Mao, David Hahn, Nicholas R. Cross, Giovanna Bucci, Thomas Roy, Marcus A. Worsley and Xiaoyu (Rayne) Zheng

Mater. Horiz., 2026
DOI: 10.1039/D5MH01991E

3D printing-directed auxetic Kevlar aerogel architectures with multiple functionalization options

Qingqing Cheng, Yang Liu, Jing Lyu, Qiang Lu, Xuetong Zhang and Wenhui Song

J. Mater. Chem. A, 2020, 8, 14243
DOI: 10.1039/D0TA02590A

Review on lattice structures for energy absorption properties

Hanfeng Yin, Wenzheng Zhang, Liangcong Zhu, Fanbo Meng, Jie Liu and Guilin Wen

Composite Structures, 2023, 304, 116397
DOI: 10.1016/j.compstruct.2022.116397

3D printing critical materials for rechargeable batteries: from materials, design and optimization strategies to applications

Yongbiao Mu, Youqi Chu, Lyuming Pan, Buke Wu, Lingfeng Zou, Jiafeng He, Meisheng Han, Tianshou Zhao and Lin Zeng

Int. J. Extrem. Manuf., 2023, 5, 042008
DOI: 10.1088/2631-7990/acf172

Recent advances in additive manufacturing of impact-resistant structures with high-performance polymers and their composites

Long Chanraksmey, Wei Zhao, Yafeng Han, Yu Chen, Oana Ghita and Binling Chen

Additive Manufacturing Frontiers, 2026, 5, 200276
DOI: 10.1016/j.amf.2025.200276

Advances in flexible resistive strain sensors and their applications

Shengbin Li, Yaoping Yu, Yuanzhao Wu, Yuanchen Li, Min Tang, Kun Wei, Jie Shang, Yiwei Liu, Haoyu Wang and Run-Wei Li

Materials Today Communications, 2025, 49, 113975
DOI: 10.1016/j.mtcomm.2025.113975

Mechanical performance of additive manufactured shoe midsole designed using variable-dimension helical springs

Mubasher Ali, Aamer Nazir and Jeng-Ywan Jeng

Int J Adv Manuf Technol, 2020, 111, 3273
DOI: 10.1007/s00170-020-06227-4

Mechanical property—processing relations for SiC foams synthesized via polymer particle templating of polycarbosilane

Christopher T. Kassner and Haydn N. G. Wadley

Int J Ceramic Engine & Sci, 2024, 6
DOI: 10.1002/ces2.10196

Tailoring 3D Printed Micro‐Structured Carbons for Adsorption

Stuart Scott, John Chew, Jonathan Barnard, Andrew Burrows, Martin Smith, Steven Tennison and Semali Perera

Adv Funct Materials, 2023, 33
DOI: 10.1002/adfm.202213715

3D printing‐enabled advanced electrode architecture design

Tiankuo Chu, Soyeon Park and Kun (Kelvin) Fu

Carbon Energy, 2021, 3, 424
DOI: 10.1002/cey2.114

Recent advances in heteroatom-doped/hierarchical porous carbon materials: Synthesis, design and potential applications

Asif Hayat, Muhammad Sohail, Abdullah Yahya Abdullah Alzahrani, Hamid Ali, Ahmed M. Abu-Dief, M.S. Amin, Asma M Alenad, Saedah R. Al-Mhyawi, Yas Al-Hadeethi, Zeeshan Ajmal, Sheng-Rong Guo and Yasin Orooji

Progress in Materials Science, 2025, 150, 101408
DOI: 10.1016/j.pmatsci.2024.101408

3D Printed Graphene‐Based Metamaterials: Guesting Multi‐Functionality in One Gain

Junjie Du, Gangwen Fu, Xi Xu, Abdelnaby M. Elshahawy and Cao Guan

Small, 2023, 19
DOI: 10.1002/smll.202207833

Prediction of effective thermal conductivity of porous lattice structures and validation with additively manufactured metal foams

Nanqiao Wang, Inderjot Kaur, Prashant Singh and Like Li

Applied Thermal Engineering, 2021, 187, 116558
DOI: 10.1016/j.applthermaleng.2021.116558

Synthesis of Three‐Dimensional Reduced‐Graphene Oxide from Graphene Oxide

Rasmeet Singh, Sajid Ullah, Nikita Rao, Mandeep Singh, Indrajit Patra, Daniel Amoako Darko, C. Prince Jebedass Issac, Keyvan Esmaeilzadeh-Salestani, Rahul Kanaoujiya, V. Vijayan and Lakshmipathy R

Journal of Nanomaterials, 2022, 2022
DOI: 10.1155/2022/8731429

Revolutionizing Monolithic Catalysts: The Breakthroughs of Design Control through Computer‐Aided‐Manufacturing

Adriana Parra‐Marfil, Agustín Francisco Pérez‐Cadenas, Francisco Carrasco‐Marín, Raúl Ocampo‐Pérez and Esther Bailón‐García

Adv Materials Technologies, 2024, 9
DOI: 10.1002/admt.202400064

Mechanical response of a Ti-6Al-4V hierarchical lattice structure: Numerical and analytical studies

Liang Dong and Kaihong Yu

Defence Technology, 2025
DOI: 10.1016/j.dt.2025.12.013

Materials research & measurement needs for ceramics additive manufacturing

Andrew J. Allen, Igor Levin and Suzanne E. Witt

J Am Ceram Soc, 2020, 103, 6055
DOI: 10.1111/jace.17369

Inter‐Flake Quantum Transport of Electrons and Holes in Inkjet‐Printed Graphene Devices

Feiran Wang, Jonathan H. Gosling, Gustavo F. Trindade, Graham A. Rance, Oleg Makarovsky, Nathan D. Cottam, Zakhar Kudrynskyi, Alexander G. Balanov, Mark T. Greenaway, Ricky D. Wildman, Richard Hague, Christopher Tuck, T. Mark Fromhold and Lyudmila Turyanska

Adv Funct Materials, 2021, 31
DOI: 10.1002/adfm.202007478

Mechanically Strengthened Aerogels through Multiscale, Multicompositional, and Multidimensional Approaches: A Review

Vinayak G. Parale, Taehee Kim, Haryeong Choi, Varsha D. Phadtare, Rushikesh P. Dhavale, Kazuyoshi Kanamori and Hyung‐Ho Park

Advanced Materials, 2024, 36
DOI: 10.1002/adma.202307772

Graphene/PEDOT:PSS conformally wrapped encapsulated silver nanowire films for transparent electrothermal heater

Yongqing Zhang, Jiahang Zhou, Lingui Hu and Yunbo Li

Materials Science and Engineering: B, 2025, 318, 118287
DOI: 10.1016/j.mseb.2025.118287

Liquid gating technology

Shijie Yu, Liting Pan, Yunmao Zhang, Xinyu Chen and Xu Hou

Pure and Applied Chemistry, 2021, 93, 1353
DOI: 10.1515/pac-2021-0402

Additive manufacturing (3D printing) of electrically conductive polymers and polymer nanocomposites and their applications

Kirstie R. Ryan, Michael P. Down, Nicholas J. Hurst, Edmund M. Keefe and Craig E. Banks

eScience, 2022, 2, 365
DOI: 10.1016/j.esci.2022.07.003

Deformation and instability of three-dimensional graphene honeycombs under in-plane compression: Atomistic simulations

Luoxia Cao and Feifei Fan

Extreme Mechanics Letters, 2020, 39, 100861
DOI: 10.1016/j.eml.2020.100861

On the mechanical properties of atomic and 3D printed zeolite-templated carbon nanotube networks

Rushikesh S. Ambekar, Eliezer F. Oliveira, Brijesh Kushwaha, Varinder Pal, Leonardo D. Machado, Seyed Mohammad Sajadi, Ray H. Baughman, Pulickel M. Ajayan, Ajit K. Roy, Douglas S. Galvao and Chandra S. Tiwary

Additive Manufacturing, 2021, 37, 101628
DOI: 10.1016/j.addma.2020.101628

Architectured graphene and its composites: Manufacturing and structural applications

Yuejiao Wang, Wenzhao Zhou, Ke Cao, Xinkang Hu, Libo Gao and Yang Lu

Composites Part A: Applied Science and Manufacturing, 2021, 140, 106177
DOI: 10.1016/j.compositesa.2020.106177

Lithium/sodium-ion capacitors based on 3D graphene-based materials

Le Li, Dan Zhang, Yuchun Gou, Junfei Fang, Qin Kang, Rong Feng, Zhiyong Liang and Jianping Deng

Journal of Energy Storage, 2021, 40, 102822
DOI: 10.1016/j.est.2021.102822

3D Printed Template‐Directed Assembly of Multiscale Graphene Structures

Jingzhuo Zhou, Xin Wu, Yan Chen, Chuang Yang, Rui Yang, Junyang Tan, Yilun Liu, Ling Qiu and Hui‐Ming Cheng

Adv Funct Materials, 2022, 32
DOI: 10.1002/adfm.202105879

Coherent nanofiber array buckling-enabled synthesis of hierarchical layered composites with enhanced strength

Xinchen Ni, Luiz H. Acauan and Brian L. Wardle

Extreme Mechanics Letters, 2020, 39, 100773
DOI: 10.1016/j.eml.2020.100773

A review of flexible force sensors for human health monitoring

Ming Cheng, Guotao Zhu, Feng Zhang, Wen-lai Tang, Shi Jianping, Ji-quan Yang and Li-ya Zhu

Journal of Advanced Research, 2020, 26, 53
DOI: 10.1016/j.jare.2020.07.001

Laser Upcycling of Hemoglobin Protein Biowaste into Engineered Graphene Aerogel Architectures for 3D Supercapacitors

Shuichiro Hayashi, Marco Rupp, Jason X. Liu, Joseph W. Stiles, Ankit Das, Amelia Sanchirico, Samuel Moore and Craig B. Arnold

Advanced Science, 2025, 12
DOI: 10.1002/advs.202412588

3D-Printed Graphene/Polydimethylsiloxane Composites for Stretchable and Strain-Insensitive Temperature Sensors

Zhenyu Wang, Weilian Gao, Qiang Zhang, Kaiqing Zheng, Jiawen Xu, Wei Xu, Erwei Shang, Jing Jiang, Jie Zhang and Yu Liu

ACS Appl. Mater. Interfaces, 2019, 11, 1344
DOI: 10.1021/acsami.8b16139

Three Dimensionally Free-Formable Graphene Foam with Designed Structures for Energy and Environmental Applications

Xi Xu, Cao Guan, Le Xu, Yong Hao Tan, Danwei Zhang, Yanqing Wang, Hong Zhang, Daniel John Blackwood, John Wang, Meng Li and Jun Ding

ACS Nano, 2020, 14, 937
DOI: 10.1021/acsnano.9b08191

Opportunities at the Intersection of 3D Printed Polymers and Pyrolysis for the Microfabrication of Carbon-Based Energy Materials

Philip R. Onffroy, Samuel Chiovoloni, Han Lin Kuo, Max A. Saccone, Jennifer Q. Lu and Joseph M. DeSimone

JACS Au, 2024, 4, 3706
DOI: 10.1021/jacsau.4c00555

Theoretical analysis of a refractive index sensor based on optical Tamm state of graphene metastructure under arbitrary polarization deflection angle

Jia-Tao Zhang, Ye Zheng and Hai-Feng Zhang

Optics & Laser Technology, 2025, 181, 111878
DOI: 10.1016/j.optlastec.2024.111878

MXene 3D‐AJP: Three‐Dimensional Well‐Oriented Freeform Networks of 2D MXene Nanosheets via Aerosol‐Based 3D Printing

Chunshan Hu, Bin Yuan, Sanjida Jahan, Md. Azahar Ali and Rahul Panat

Small, 2026
DOI: 10.1002/smll.202510964

Topologically engineered 3D printed architectures with superior mechanical strength

Rushikesh S. Ambekar, Brijesh Kushwaha, Pradeep Sharma, Federico Bosia, Massimiliano Fraldi, Nicola M. Pugno and Chandra S. Tiwary

Materials Today, 2021, 48, 72
DOI: 10.1016/j.mattod.2021.03.014

Multifunctional Mechanical Metamaterials Based on Triply Periodic Minimal Surface Lattices

Oraib Al-Ketan and Rashid K. Abu Al-Rub

Adv Eng Mater, 2019, 21
DOI: 10.1002/adem.201900524

Additive manufacturing of two-phase lightweight, stiff and high damping carbon fiber reinforced polymer microlattices

Zhenpeng Xu, Chan Soo Ha, Ruthvik Kadam, John Lindahl, Seokpum Kim, H. Felix Wu, Vlastimil Kunc and Xiaoyu Zheng

Additive Manufacturing, 2020, 32, 101106
DOI: 10.1016/j.addma.2020.101106

Compressive responses of snap-fit Ti-6Al-4V octet-truss lattices in structure’s stiffest direction

Liang Dong

Materials & Design, 2021, 208, 109923
DOI: 10.1016/j.matdes.2021.109923

Multi-material additive manufacturing of energy storage and conversion devices: Recent progress and future prospects

Naimul Arefin, Hur-E-Jannat Moni, David Espinosa, Weilong Cong and Minxiang Zeng

Applied Physics Reviews, 2025, 12
DOI: 10.1063/5.0235864

Recent advances in ink-based additive manufacturing for porous structures

Zipeng Guo and Chi Zhou

Additive Manufacturing, 2021, 48, 102405
DOI: 10.1016/j.addma.2021.102405

Additive Manufacturing of Functional Microarchitected Reactors for Energy, Environmental, and Biological Applications

Seok Kim, Do Hyeog Kim, Wonpyo Kim, Young Tae Cho and Nicholas X. Fang

Int. J. of Precis. Eng. and Manuf.-Green Tech., 2021, 8, 303
DOI: 10.1007/s40684-020-00277-5

Flexible and Stretchable Strategies for Electronic Skins: Materials, Structure, and Integration

Zuqing Yuan, Su-Ting Han, Wenchao Gao and Caofeng Pan

ACS Appl. Electron. Mater., 2022, 4, 1
DOI: 10.1021/acsaelm.1c00025

Multi-Arch-Structured All-Carbon Aerogels with Superelasticity and High Fatigue Resistance as Wearable Sensors

Jiankun Huang, Jingbin Zeng, Baoqiang Liang, Junwei Wu, Tongge Li, Qing Li, Fan Feng, Qingwen Feng, Mark J. Rood and Zifeng Yan

ACS Appl. Mater. Interfaces, 2020, 12, 16822
DOI: 10.1021/acsami.0c01794

Hierarchically Structured Components: Design, Additive Manufacture, and Their Energy Applications

Panfeng Wang, Jin Xuan, Ronghao Zhang, Hao Zhang, Qiang Wang, Haoyang Wang, Houli Liu and Li Zhang

Adv Materials Technologies, 2022, 7
DOI: 10.1002/admt.202100672

Design and optimization of projection stereolithography additive manufacturing system with multi-pass scanning

Qin Qin, Jigang Huang, Jin Yao and Wenxiang Gao

RPJ, 2021, 27, 636
DOI: 10.1108/RPJ-08-2019-0219

Biomedical Applications of Carbon Nanomaterials: Fullerenes, Quantum Dots, Nanotubes, Nanofibers, and Graphene

Manish Gaur, Charu Misra, Awadh Bihari Yadav, Shiv Swaroop, Fionn Ó. Maolmhuaidh, Mikhael Bechelany and Ahmed Barhoum

Materials, 2021, 14, 5978
DOI: 10.3390/ma14205978

Tribological characteristics of digital light processing (DLP) 3D printed graphene/resin composite: Influence of graphene presence and process settings

Muammel M. Hanon, Arsany Ghaly, László Zsidai and Szilvia Klébert

Materials & Design, 2022, 218, 110718
DOI: 10.1016/j.matdes.2022.110718

Additive manufacturing and related technologies – The source of chemically active materials in separation science

Mariusz Belka and Tomasz Bączek

TrAC Trends in Analytical Chemistry, 2021, 142, 116322
DOI: 10.1016/j.trac.2021.116322

Scalable synthesis, characterization and testing of 3D architected gyroid graphene lattices from additively manufactured templates

Juveiriah M. Ashraf, Jing Fu, Kin Liao, Vincent Chan and Rashid K. Abu Al-Rub

J. Micromech. Mol. Phys., 2021, 06, 13
DOI: 10.1142/S2424913021430025

Synergistic effect of metal-organic framework-derived boron and nitrogen heteroatom-doped three-dimensional porous carbons for precious-metal-free catalytic reduction of nitroarenes

Chi Van Nguyen, Seulchan Lee, Yongchul G. Chung, Wei-Hung Chiang and Kevin C.-W. Wu

Applied Catalysis B: Environmental, 2019, 257, 117888
DOI: 10.1016/j.apcatb.2019.117888

Biomimetic and Radially Symmetric Graphene Aerogel for Flexible Electronics

Libo Gao, Rong Fan, Wenzhao Zhou, Xinkang Hu, Ke Cao, Weidong Wang and Yang Lu

Adv Elect Materials, 2019, 5
DOI: 10.1002/aelm.201900353

Additive manufacturing of aerogels: Recent advancements and innovations

Omid Aghababaei Tafreshi, Esmat Sheydaeian, Mohammed A.S. Ba Dughaish, Shahriar Ghaffari-Mosanenzadeh, Zia Saadatnia and Hani E. Naguib

Applied Materials Today, 2025, 45, 102800
DOI: 10.1016/j.apmt.2025.102800

Digital Light Processing 3D‐Printed Silica Aerogel and as a Versatile Host Framework for High‐Performance Functional Nanocomposites

Weizhi Zou, Zhen Wang, Zhenchao Qian, Jian Xu and Ning Zhao

Advanced Science, 2022, 9
DOI: 10.1002/advs.202204906

Cellulose, graphene and graphene-cellulose composite aerogels and their application in water treatment: a review

Karabo G. Sekwele, Shepherd M. Tichapondwa and Washington Mhike

Discov Mater, 2024, 4
DOI: 10.1007/s43939-024-00097-3

Hierarchical honeycomb graphene aerogels reinforced by carbon nanotubes with multifunctional mechanical and electrical properties

Jannatul Dil Afroze, Liyong Tong, Md Jaynul Abden, Ziwen Yuan and Yuan Chen

Carbon, 2021, 175, 312
DOI: 10.1016/j.carbon.2021.01.002

Progress and perspective in mechanically robust carbon aerogels

Fan Guo, Cao Yang, Zhen Xu and Chao Gao

Journal of Applied Physics, 2022, 131
DOI: 10.1063/5.0084458

3D-printed electrically conductive silicon carbide

Zipeng Guo, Lu An, Saurabh Khuje, Aditya Chivate, Jiao Li, Yiquan Wu, Yong Hu, Jason Armstrong, Shenqiang Ren and Chi Zhou

Additive Manufacturing, 2022, 59, 103109
DOI: 10.1016/j.addma.2022.103109

Additive manufacturing of topology optimized multi-functional cellular framework for enhanced energy absorption

Shruti Gupta, R Gnanamoorthy and Balasubramanian Kandasubramanian

Prog Addit Manuf, 2025, 10, 8865
DOI: 10.1007/s40964-025-01190-6

3D Printing of Ultralight Biomimetic Hierarchical Graphene Materials with Exceptional Stiffness and Resilience

Meiwen Peng, Zhen Wen, Lingjie Xie, Jian Cheng, Zheng Jia, Danli Shi, Huajie Zeng, Bo Zhao, Zhiqiang Liang, Teng Li and Lin Jiang

Advanced Materials, 2019, 31
DOI: 10.1002/adma.201902930

3D Printing of Electrochemical Energy Storage Devices: A Review of Printing Techniques and Electrode/Electrolyte Architectures

Meng Cheng, Ramasubramonian Deivanayagam and Reza Shahbazian‐Yassar

Batteries & Supercaps, 2020, 3, 130
DOI: 10.1002/batt.201900130

110th Anniversary: Vat Photopolymerization-Based Additive Manufacturing: Current Trends and Future Directions in Materials Design

Gayan A. Appuhamillage, Nicholas Chartrain, Viswanath Meenakshisundaram, Keyton D. Feller, Christopher B. Williams and Timothy E. Long

Ind. Eng. Chem. Res., 2019, 58, 15109
DOI: 10.1021/acs.iecr.9b02679

Three‐Dimensional Printed Mechanically Compliant Supercapacitor with Exceptional Areal Capacitance from a Self‐Healable Ink

Wenbin Kang, Li Zeng, Shangwen Ling, Chunzheng Lv, Jingfeng Liu, Ruoxin Yuan and Chuhong Zhang

Adv Funct Materials, 2021, 31
DOI: 10.1002/adfm.202102184

Revolutionizing catalytic nitroarene reduction via manganese and nitrogen co‐doped porous carbon with engineered pore architecture

Tahreem Khan, Muhammad Jamshed Latif, Sarmed Ali, Saba Jamil, Shamsa Bibi, Wajiha Ashfaq and Shanza Rauf Khan

J of Chemical Tech & Biotech, 2026, 101, 299
DOI: 10.1002/jctb.70092

Laser‐Induced Graphene Enabled Additive Manufacturing of Multifunctional 3D Architectures with Freeform Structures

Fu Liu, Yan Gao, Guantao Wang, Dan Wang, Yanan Wang, Meihong He, Xilun Ding, Haibin Duan and Sida Luo

Advanced Science, 2023, 10
DOI: 10.1002/advs.202204990

Recent Progress in 3D Printing of 2D Material‐Based Macrostructures

Rui Yang, Jingzhuo Zhou, Chuang Yang, Ling Qiu and Huiming Cheng

Adv Materials Technologies, 2020, 5
DOI: 10.1002/admt.201901066

3D printed hierarchical re-entrant honeycombs: Enhanced mechanical properties and the underlying deformation mechanisms

Chi Zhan, Mingzhe Li, Robert McCoy, Linda Zhao and Weiyi Lu

Composite Structures, 2022, 290, 115550
DOI: 10.1016/j.compstruct.2022.115550

Computational design of microarchitected porous electrodes for redox flow batteries

Victor A. Beck, Jonathan J. Wong, Charles F. Jekel, Daniel A. Tortorelli, Sarah E. Baker, Eric B. Duoss and Marcus A. Worsley

Journal of Power Sources, 2021, 512, 230453
DOI: 10.1016/j.jpowsour.2021.230453

Roadblocks faced by graphene in replacing graphite in large-scale applications

Peter Samora Owuor, Abdullah Khan, Carlos Leon y Leon, Sehmus Ozden, Rodney Priestley, Craig Arnold, Nitin Chopra and Chandra Sekhar Tiwary

Oxford Open Materials Science, 2020, 1
DOI: 10.1093/oxfmat/itab004

Mechanical response of Ti–6Al–4V hierarchical architected metamaterials

Liang Dong

Acta Materialia, 2019, 175, 90
DOI: 10.1016/j.actamat.2019.06.004

A Review on Magnetorheological Jet Polishing Technique for Microstructured Functional Surfaces

Dunlan Song, Hongguang Du, Jieqiong Lin, Xiaoqin Zhou and Rongqi Wang

Lubricants, 2022, 10, 237
DOI: 10.3390/lubricants10100237

3D Nanomaterials: The future of industrial, biological, and environmental applications

Chandrabhan Verma, Elyor Berdimurodov, Dakeshwar K. Verma, Khasan Berdimuradov, Akram Alfantazi and Chaudhery Mustansar Hussain

Inorganic Chemistry Communications, 2023, 156, 111163
DOI: 10.1016/j.inoche.2023.111163

Additive manufacturing and processing of architected materials

Christopher M. Spadaccini

MRS Bull., 2019, 44, 782
DOI: 10.1557/mrs.2019.234

Enhanced mechanical properties of 3D printed graphene-polymer composite lattices at very low graphene concentrations

Kalaimani Markandan and Chang Quan Lai

Composites Part A: Applied Science and Manufacturing, 2020, 129, 105726
DOI: 10.1016/j.compositesa.2019.105726

Engineered nanomaterials for energy sector: market trends, modern applications and future prospects

E Inshakova, A Inshakova and A Goncharov

IOP Conf. Ser.: Mater. Sci. Eng., 2020, 971, 032031
DOI: 10.1088/1757-899X/971/3/032031

A Review on Synthesis, Functionalization, Processing and Applications of Graphene Based High Performance Polymer Nanocomposites

Tushar T. Hawal, Maharudra S. Patil, Siddalinga Swamy and Raviraj M. Kulkarni

CNANO, 2022, 18, 167
DOI: 10.2174/1573413717666210604155102

On the computational modeling, additive manufacturing, and testing of tube-networks TPMS-based graphene lattices and characterizing their multifunctional properties

Juveiriah M. Ashraf, Somayya E. Taher, Dong-Wook Lee, Kin Liao and Rashid K. Abu Al-Rub

APL Materials, 2022, 10
DOI: 10.1063/5.0101412

Thoughts on current trends in applied polymer/biopolymer materials for modern functional applications

Minkyu Kim, Saewon Kang and Vladimir V. Tsukruk

Polim. z., 2023, 45, 3
DOI: 10.15407/polymerj.45.01.003

Mechanical responses of snap-fit Ti-6Al-4V warren-truss lattice structures

Liang Dong

International Journal of Mechanical Sciences, 2020, 173, 105460
DOI: 10.1016/j.ijmecsci.2020.105460

Highly Effective Methods of Obtaining N-Doped Graphene by Gamma Irradiation

Piotr Kamedulski, Stanislaw Truszkowski and Jerzy P. Lukaszewicz

Materials, 2020, 13, 4975
DOI: 10.3390/ma13214975

Advances in hierarchically porous materials: Fundamentals, preparation and applications

Song Li, Han Zhang, Shuo Li, Jiaqi Wang, Qiuwang Wang and Zhilong Cheng

Renewable and Sustainable Energy Reviews, 2024, 202, 114641
DOI: 10.1016/j.rser.2024.114641

3D Printing for Solid‐State Energy Storage

Xiaocong Tian and Bingang Xu

Small Methods, 2021, 5
DOI: 10.1002/smtd.202100877

Recent Advances on 2D Materials towards 3D Printing

I. Jénnifer Gómez, Nuria Alegret, Antonio Dominguez-Alfaro and Manuel Vázquez Sulleiro

Chemistry, 2021, 3, 1314
DOI: 10.3390/chemistry3040095

3D-printing of a complete modular ion mobility spectrometer

Carolin Drees, Simon Höving, Wolfgang Vautz, Joachim Franzke and Sebastian Brandt

Materials Today, 2021, 44, 58
DOI: 10.1016/j.mattod.2020.10.033

Mechanical responses of Ti-6Al-4V cuboctahedral truss lattice structures

Liang Dong

Composite Structures, 2020, 235, 111815
DOI: 10.1016/j.compstruct.2019.111815

Refractive index sensor using Fibonacci sequence of gyroidal graphene and porous silicon based on Tamm plasmon polariton

Zaky A. Zaky, M. Al-Dossari, Ensjam I. Zohny and Arafa H. Aly

Opt Quant Electron, 2023, 55
DOI: 10.1007/s11082-022-04262-x

A Review of Graphene Oxide and Reduced Graphene Oxide Applications: Multifunctional Nanomaterials for Sustainable Environmental and Energy Devices

Ikbal Adrian Milka, Bijak Riyandi Ahadito, Desnelli Desnelli, Nurlisa Hidayati and Muhammad Said

C, 2026, 12, 11
DOI: 10.3390/c12010011

Three‐dimensional printing of high‐mass loading electrodes for energy storage applications

Hao Yang, Zhaoxuan Feng, Xiaoling Teng, Lu Guan, Han Hu and Mingbo Wu

InfoMat, 2021, 3, 631
DOI: 10.1002/inf2.12181

Preserving Fine Structure Details and Dramatically Enhancing Electron Transfer Rates in Graphene 3D-Printed Electrodes via Thermal Annealing: Toward Nitroaromatic Explosives Sensing

Filip Novotný, Veronika Urbanová, Jan Plutnar and Martin Pumera

ACS Appl. Mater. Interfaces, 2019, 11, 35371
DOI: 10.1021/acsami.9b06683

High‐Loaded Electrode Filaments for Additive Manufacturing of Structural Batteries

Soyeon Park, Zhang Cao, Dae Han Sung and Kun Kelvin Fu

Advanced Energy Materials, 2023, 13
DOI: 10.1002/aenm.202301704

3D printing-assisted gyroidal graphite foam for advanced supercapacitors

Junjie Du, Qinghe Cao, Xiaowan Tang, Xi Xu, Xu Long, Jun Ding, Cao Guan and Wei Huang

Chemical Engineering Journal, 2021, 416, 127885
DOI: 10.1016/j.cej.2020.127885

Direct ink writing of polyimide/bacterial cellulose composite aerogel for thermal insulation

Zhuocheng Ma, Tiantian Xue, Qamar Wali, Yue-E Miao, Wei Fan and Tianxi Liu

Composites Communications, 2023, 39, 101528
DOI: 10.1016/j.coco.2023.101528

Solution-processed 2D van der Waals networks: Fabrication strategies, properties, and scalable device applications

Dongjoon Rhee, Deep Jariwala, Jeong Ho Cho and Joohoon Kang

Applied Physics Reviews, 2024, 11
DOI: 10.1063/5.0205192

A review on the current research on graphene-based aerogels and their applications

Gaelle Nassar, Elissa Daou, Rita Najjar, Maria Bassil and Roland Habchi

Carbon Trends, 2021, 4, 100065
DOI: 10.1016/j.cartre.2021.100065

Recent advancement in 3D graphene for metal-sulfur batteries

Meetesh Singh, Tim Dawsey and Ram K. Gupta

Journal of Energy Storage, 2023, 73, 109059
DOI: 10.1016/j.est.2023.109059

3D Printed Graphene Electrodes’ Electrochemical Activation

Michelle P. Browne, Filip Novotný, Zdeněk Sofer and Martin Pumera

ACS Appl. Mater. Interfaces, 2018, 10, 40294
DOI: 10.1021/acsami.8b14701

Adaptive optical beam steering and tuning system based on electrowetting driven fluidic rotor

Weifeng Cheng, Jiansheng Liu, Zheng Zheng, Xukun He, Bowen Zheng, Hualiang Zhang, Huachen Cui, Xiaoyu Zheng, Tao Zheng, Bruce E. Gnade and Jiangtao Cheng

Commun Phys, 2020, 3
DOI: 10.1038/s42005-020-0294-6

3D‐Printed Functional Polymers and Nanocomposites: Defects Characterization and Product Quality Improvement

Oluwaseun A. Alo, David Mauchline and Iyiola O. Otunniyi

Adv Eng Mater, 2022, 24
DOI: 10.1002/adem.202101219

3D-printing of ceramic aerogels by spatial photopolymerization

Efrat Shukrun Farrell, Nir Ganonyan, Ido Cooperstein, May Yam Moshkovitz, Yaron Amouyal, David Avnir and Shlomo Magdassi

Applied Materials Today, 2021, 24, 101083
DOI: 10.1016/j.apmt.2021.101083

Activated Carbon in the Third Dimension—3D Printing of a Tuned Porous Carbon

Hendryk Steldinger, Alessandro Esposito, Kai Brunnengräber, Jan Gläsel and Bastian J. M. Etzold

Advanced Science, 2019, 6
DOI: 10.1002/advs.201901340

Graphene-based wearable piezoresistive physical sensors

Qingbin Zheng, Jeng-hun Lee, Xi Shen, Xiaodong Chen and Jang-Kyo Kim

Materials Today, 2020, 36, 158
DOI: 10.1016/j.mattod.2019.12.004

3D graphene-based material: Overview, perspective, advancement, energy storage, biomedical engineering and environmental applications a bibliometric analysis

Ehtisham Umar, Muhammad Ikram, Junaid Haider, Walid Nabgan, Muhammad Imran and Ghazanfar Nazir

Journal of Environmental Chemical Engineering, 2023, 11, 110339
DOI: 10.1016/j.jece.2023.110339

Nanomaterial Patterning in 3D Printing

Brian Elder, Rajan Neupane, Eric Tokita, Udayan Ghosh, Samuel Hales and Yong Lin Kong

Advanced Materials, 2020, 32
DOI: 10.1002/adma.201907142

Understanding the activity transport nexus in water and CO2 electrolysis: State of the art, challenges and perspectives

Bastian J.M. Etzold, Ulrike Krewer, Simon Thiele, Andreas Dreizler, Elias Klemm and Thomas Turek

Chemical Engineering Journal, 2021, 424, 130501
DOI: 10.1016/j.cej.2021.130501

Carbon‐based perovskite solar cells: From single‐junction to modules

Rui He, Xiaozhou Huang, Mason Chee, Feng Hao and Pei Dong

Carbon Energy, 2019, 1, 109
DOI: 10.1002/cey2.11

The capacitance and electron transfer of 3D-printed graphene electrodes are dramatically influenced by the type of solvent used for pre-treatment

Rui Gusmão, Michelle P. Browne, Zdenek Sofer and Martin Pumera

Electrochemistry Communications, 2019, 102, 83
DOI: 10.1016/j.elecom.2019.04.004

Mechanical properties of diamond-type triply periodic minimal surface structures fabricated by photo-curing 3D printing

Chengjun Zeng, Junqi Hu, Liwu Liu, Wei Zhao, Xiaozhou Xin, Xuehao Song, Yanju Liu and Jinsong Leng

Composite Structures, 2025, 352, 118695
DOI: 10.1016/j.compstruct.2024.118695

Challenges and opportunities in free-standing supercapacitors research

Kenneth G. Latham, Anjali Achazhiyath Edathil, Babak Rezaei, Sihui Liu, Sang Nguyen, Stephan Sylvest Keller, Felice Torrisi, Emile S. Greenhalgh and Maria-Magdalena Titirici

APL Materials, 2022, 10
DOI: 10.1063/5.0123453

3D Printed Nanoporous Separators Based on Polymerization-Induced Phase Separation for Fast-Charging, High Cycling Stability Li-Ion Batteries

Meghann Ma, Asya Orhan, Longsheng Feng, Martin Patrick de Beer, Alyssa Lanae Troksa, Natalie Hwee, Tae Wook Heo, Juergen Biener, Jiandi Wan and Jianchao Ye

ACS Appl. Eng. Mater., 2024, 2, 2245
DOI: 10.1021/acsaenm.4c00438

A Review on Cutting-Edge Three-Dimensional Graphene-Based Composite Materials: Redefining Wastewater Remediation for a Cleaner and Sustainable World

Tahreem Shahzad, Sajawal Nawaz, Hasan Jamal, Taiba Shahzad, Farid Akhtar and Urooj Kamran

J. Compos. Sci., 2025, 9, 18
DOI: 10.3390/jcs9010018

Multiscale modeling assessment of the interfacial properties and critical aspect ratio of structurally defected graphene in polymer nanocomposites for defect engineering

Daeun Shin, Inseok Jeon and Seunghwa Yang

European Journal of Mechanics - A/Solids, 2022, 96, 104728
DOI: 10.1016/j.euromechsol.2022.104728

Freeze Casting: From Low‐Dimensional Building Blocks to Aligned Porous Structures—A Review of Novel Materials, Methods, and Applications

Gaofeng Shao, Dorian A. H. Hanaor, Xiaodong Shen and Aleksander Gurlo

Advanced Materials, 2020, 32
DOI: 10.1002/adma.201907176

Gyroidal graphene/porous silicon array for exciting optical Tamm state as optical sensor

Zaky A. Zaky and Arafa H. Aly

Sci Rep, 2021, 11
DOI: 10.1038/s41598-021-98305-0

Additive Manufacturing of Polymer‐Based Lubrication

Khan Rajib Hossain, Pan Jiang, Xinle Yao, Jiayu Wu, Danli Hu, Xingxing Yang, Tao Wu and Xiaolong Wang

Macro Materials & Eng, 2023, 308
DOI: 10.1002/mame.202300147

Mechanical properties of graphene-based gyroidal sheet/shell architected lattices

Somayya E. Taher, Juveiriah M. Ashraf, Kin Liao and Rashid K. Abu Al-Rub

Graphene and 2D mater, 2023, 8, 161
DOI: 10.1007/s41127-023-00066-2

Direct Ink Writing Technology (3D Printing) of Graphene-Based Ceramic Nanocomposites: A Review

Nestor Washington Solís Pinargote, Anton Smirnov, Nikita Peretyagin, Anton Seleznev and Pavel Peretyagin

Nanomaterials, 2020, 10, 1300
DOI: 10.3390/nano10071300

Intercalation Engineering of 2D Materials at Macroscale for Smart Human–Machine Interface and Double‐Layer to Faradaic Charge Storage for Ions Separation

Rahul Patil and Saikat Dutta

Adv Materials Inter, 2023, 10
DOI: 10.1002/admi.202202137

Vat photopolymerisation 3D printing of graphene-based materials

C. Muhammed Shebeeb, Mohammed Bin Afif, Liya Jacob, Daniel Choi and Haider Butt

Virtual and Physical Prototyping, 2023, 18
DOI: 10.1080/17452759.2023.2276250

3D printing of polymer composites to fabricate wearable sensors: A comprehensive review

Amr Osman and Jian Lu

Materials Science and Engineering: R: Reports, 2023, 154, 100734
DOI: 10.1016/j.mser.2023.100734

Selective Laser Pyrolytic Micropatterning of Stretched Elastomeric Polymer Surfaces

Eunseung Hwang, Younggeun Lee, Jaemook Lim, Youngchan Kim, Weihao Qu, Koungjun Min, Won Chul Lee and Sukjoon Hong

Int. J. of Precis. Eng. and Manuf.-Green Tech., 2021, 8, 795
DOI: 10.1007/s40684-020-00292-6

A novel UV-curable molecular-modified graphene oxide for high-resolution printed electronics

Shuyuan Zhang, Li Wang, Yu Luo, Keke Wang, Yingtao Li, Xueming Feng, Yuechen Pei, Zhaofa Zhang and Bingheng Lu

Carbon, 2021, 176, 470
DOI: 10.1016/j.carbon.2021.01.150

Perspectives on multi-material additive manufacturing

Xiaoyu Zheng, Christopher Williams, Christopher M. Spadaccini and Kristina Shea

Journal of Materials Research, 2021, 36, 3549
DOI: 10.1557/s43578-021-00388-y

Programmable construction of vasculature by printing in cementitious materials for self-healing application

Yuanyuan Zhang, Wenqiang Li, Pan Pan, Jiaoning Tang, Biqin Dong, Feng Xing and Guangming Zhu

Composites Part B: Engineering, 2022, 242, 110056
DOI: 10.1016/j.compositesb.2022.110056

Colloidal Materials for 3D Printing

Cheng Zhu, Andrew J. Pascall, Nikola Dudukovic, Marcus A. Worsley, Joshua D. Kuntz, Eric B. Duoss and Christopher M. Spadaccini

Annu. Rev. Chem. Biomol. Eng., 2019, 10, 17
DOI: 10.1146/annurev-chembioeng-060718-030133

Photochemically Activated 3D Printing Inks: Current Status, Challenges, and Opportunities

Steven C. Gauci, Aleksandra Vranic, Eva Blasco, Stefan Bräse, Martin Wegener and Christopher Barner‐Kowollik

Advanced Materials, 2024, 36
DOI: 10.1002/adma.202306468

Recent Trends in the Use of Three-Dimensional Graphene Structures for Supercapacitors

Awais Zaka, Khizar Hayat and Vikas Mittal

ACS Appl. Electron. Mater., 2021, 3, 574
DOI: 10.1021/acsaelm.0c00953

Current challenges and potential directions towards precision microscale additive manufacturing – Part II: Laser-based curing, heating, and trapping processes

Dipankar Behera, Samira Chizari, Lucas A. Shaw, Michael Porter, Ryan Hensleigh, Zhenpeng Xu, Nilabh K. Roy, Liam G. Connolly, Xiaoyu (Rayne) Zheng, Sourabh Saha, Jonathan B. Hopkins and Michael A. Cullinan

Precision Engineering, 2021, 68, 301
DOI: 10.1016/j.precisioneng.2020.12.012

3D printed graphene/polydimethylsiloxane composite for stretchable strain sensor with tunable sensitivity

Zhenyu Wang, Qiang Zhang, Yunong Yue, Jiawen Xu, Wei Xu, Xinhu Sun, Yanqiu Chen, Jin Jiang and Yu Liu

Nanotechnology, 2019, 30, 345501
DOI: 10.1088/1361-6528/ab1287

Density scaling in the mechanics of a disordered mechanical meta-material

Daniel Rayneau-Kirkhope, Silvia Bonfanti and Stefano Zapperi

Applied Physics Letters, 2019, 114
DOI: 10.1063/1.5083027

3D‐Laminated Graphene with Combined Laser Irradiation and Resin Infiltration toward Designable Macrostructure and Multifunction

Yan Gao, Yujiang Zhai, Guantao Wang, Fu Liu, Haibin Duan, Xilun Ding and Sida Luo

Advanced Science, 2022, 9
DOI: 10.1002/advs.202200362

3D Graphene-Coupled Aerogel Nanoarchitectures: Emerging Paradigm Toward Sustainable Applications in Fuel Cell

Siti Hasanah Osman, Siti Kartom Kamarudin, Mohd Harris Jamil, Enggar Alfianto, Norazuwana Shaari and Zulfirdaus Zakaria

Korean J. Chem. Eng., 2025, 42, 2131
DOI: 10.1007/s11814-025-00470-9

Ultra‐Stiff yet Super‐Elastic Graphene Aerogels by Topological Cellular Hierarchy

Yuxing Xia, Huasong Qin, Wenhao Tong, Yuxiang Qi, Kaiwen Li, Yingjun Liu, Zhen Xu, Yilun Liu, Kai Pang, Chao Gao and Weiwei Gao

Advanced Materials, 2025, 37
DOI: 10.1002/adma.202417462

Design and additive manufacturing of optimized electrodes for energy storage applications

Mariana Desireé Reale Batista, Swetha Chandrasekaran, Bryan D. Moran, Miguel Salazar de Troya, Anica Pinongcos, Zhen Wang, Ryan Hensleigh, Adam Carleton, Manhao Zeng, Thomas Roy, Dun Lin, Xinzhe Xue, Victor A. Beck, Daniel A. Tortorelli, Michael Stadermann, Rayne Zheng, Yat Li and Marcus A. Worsley

Carbon, 2023, 205, 262
DOI: 10.1016/j.carbon.2023.01.044

A systematic review: Enhancing cementitious composites through additively manufactured lattice structures

Hamza El Etri, Tohid Ghanbari-Ghazijahani, Rouzbeh Abbassi and Erik Schlangen

Mechanics of Advanced Materials and Structures, 2025
DOI: 10.1080/15376494.2025.2585150

3D printing of powdered activated carbon monoliths: Effect of structuring on physicochemical and mechanical properties and its influence on the adsorption performance

Jair Fernando Rangel‑Sequeda, Margarita Loredo‑Cancino, Vicente Ismael Águeda Maté, David Alejandro De Haro‑Del Rio and Nancy Elizabeth Dávila-Guzmán

Materials Today Communications, 2022, 33, 104758
DOI: 10.1016/j.mtcomm.2022.104758

Evolution of 3D Printing Methods and Materials for Electrochemical Energy Storage

Vladimir Egorov, Umair Gulzar, Yan Zhang, Siobhán Breen and Colm O'Dwyer

Advanced Materials, 2020, 32
DOI: 10.1002/adma.202000556

Additive manufacturing high performance graphene-based composites: A review

Yan Li, Zuying Feng, Lijing Huang, Khamis Essa, Emiliano Bilotti, Han Zhang, Ton Peijs and Liang Hao

Composites Part A: Applied Science and Manufacturing, 2019, 124, 105483
DOI: 10.1016/j.compositesa.2019.105483

3D printed colloidal aerogels: Principle, process, performance, and perspective

Qingqing Cheng, Zhizhi Sheng, Yafei Ding, Yuzhen Li and Xuetong Zhang

Progress in Materials Science, 2025, 152, 101456
DOI: 10.1016/j.pmatsci.2025.101456

3D Graphene Materials: From Understanding to Design and Synthesis Control

Zhuxing Sun, Siyuan Fang and Yun Hang Hu

Chem. Rev., 2020, 120, 10336
DOI: 10.1021/acs.chemrev.0c00083

Extrusion-Based 3D Printing for Highly Porous Alginate Materials Production

Natalia Menshutina, Andrey Abramov, Pavel Tsygankov and Daria Lovskaya

Gels, 2021, 7, 92
DOI: 10.3390/gels7030092

Advances in Carbon-Based Resistance Strain Sensors

Hao Wang, Chengkun Liu, Boyu Li, Jie Liu, Yutong Shen, Mengdi Zhang, Keyu Ji, Xue Mao, Runjun Sun and Fenglei Zhou

ACS Appl. Electron. Mater., 2023, 5, 674
DOI: 10.1021/acsaelm.2c01375

Formation of Graphite Materials by Decomposition of Liquid Hydrocarbons Heated to High Temperatures

Dmitrii Karavaev, Elena Matygullina, Lyudmila Sirotenko, Felix Raymundo Saucedo-Zendejo, S. Belousov and S. Roshchupkin

E3S Web Conf., 2023, 398, 01039
DOI: 10.1051/e3sconf/202339801039

Tailored and Highly Stretchable Sensor Prepared by Crosslinking an Enhanced 3D Printed UV‐Curable Sacrificial Mold

Shuqiang Peng, Zian Wang, Jinbin Lin, Jia‐Tao Miao, Longhui Zheng, Zhi Yang, Zixiang Weng and Lixin Wu

Adv Funct Materials, 2021, 31
DOI: 10.1002/adfm.202008729

3D Printing of Next‐generation Electrochemical Energy Storage Devices: from Multiscale to Multimaterial

Xi Xu, Yong Hao Tan, Jun Ding and Cao Guan

Energy & Environ Materials, 2022, 5, 427
DOI: 10.1002/eem2.12175

3d-Printed Electrically Conductive Silicon Carbide

Zipeng Guo, Lu An, Saurabh Khuje, Aditya Chivate, Jiao Li, Yiquan Wu, Yong Hu, Jason Armstrong, Shenqiang Ren and Chi Zhou

SSRN Journal, 2022
DOI: 10.2139/ssrn.4137487

Aerogel‐Based Biomaterials for Biomedical Applications: From Fabrication Methods to Disease‐Targeting Applications

Solmaz Karamikamkar, Ezgi Pinar Yalcintas, Reihaneh Haghniaz, Natan Roberto de Barros, Marvin Mecwan, Rohollah Nasiri, Elham Davoodi, Fatemeh Nasrollahi, Ahmet Erdem, Heemin Kang, Junmin Lee, Yangzhi Zhu, Samad Ahadian, Vadim Jucaud, Hajar Maleki, Mehmet Remzi Dokmeci, Han‐Jun Kim and Ali Khademhosseini

Advanced Science, 2023, 10
DOI: 10.1002/advs.202204681

Recent advances on 3D printing graphene-based composites

Haichang Guo, Ruicong Lv and Shulin Bai

Nano Materials Science, 2019, 1, 101
DOI: 10.1016/j.nanoms.2019.03.003

An analytical stress–stretch relation for porous elastomeric materials with large deformation

Qiang Zhang, Yan Shi and Cunfa Gao

Acta Mech, 2023, 234, 6069
DOI: 10.1007/s00707-023-03697-x

Chemistry from 3D printed objects

Matthew R. Hartings and Zeeshan Ahmed

Nat Rev Chem, 2019, 3, 305
DOI: 10.1038/s41570-019-0097-z

Additive Manufacturing of 3D Aerogels and Porous Scaffolds: A Review

Halil Tetik, Ying Wang, Xiao Sun, Daxian Cao, Nasrullah Shah, Hongli Zhu, Fang Qian and Dong Lin

Adv Funct Materials, 2021, 31
DOI: 10.1002/adfm.202103410

Compressive property of a hybrid hierarchical metamaterial

Shukai Zhang, Kaihong Yu and Liang Dong

Materials Today Communications, 2022, 33, 104260
DOI: 10.1016/j.mtcomm.2022.104260

Toward Multiscale, Multimaterial 3D Printing

Cheng Zhu, Hawi B. Gemeda, Eric B. Duoss and Christopher M. Spadaccini

Advanced Materials, 2024, 36
DOI: 10.1002/adma.202314204

3D-Printed Lithium-Ion Battery Electrodes: A Brief Review of Three Key Fabrication Techniques

Alexander A. Pavlovskii, Konstantin Pushnitsa, Alexandra Kosenko, Pavel Novikov and Anatoliy A. Popovich

Materials, 2024, 17, 5904
DOI: 10.3390/ma17235904

A Review of the Mechanical Properties of Graphene Aerogel Materials: Experimental Measurements and Computer Simulations

Penghao Qi, Hanxing Zhu, Feodor Borodich and Qing Peng

Materials, 2023, 16, 1800
DOI: 10.3390/ma16051800

3D Printing Carbonaceous Objects from Polyimide Pyrolysis

Clay B. Arrington, Daniel A. Rau, Johanna A. Vandenbrande, Maruti Hegde, Christopher B. Williams and Timothy E. Long

ACS Macro Lett., 2021, 10, 412
DOI: 10.1021/acsmacrolett.1c00032

Additive manufacturing of carbon nanocomposites for structural applications

Muhammed Hisham, Muhammed Shebeeb C, Dileep C, Liya Jacob and Haider Butt

Journal of Materials Research and Technology, 2024, 28, 4674
DOI: 10.1016/j.jmrt.2024.01.049

Graphene-based materials for next-generation energy storage: Progress, challenges, and future outlook

Lina M. Shaker, Abdulamier A. Abdulamier and Ahmed A. Al-Amiery

Journal of Alloys and Compounds, 2025, 1036, 182079
DOI: 10.1016/j.jallcom.2025.182079

Hierarchically MOF‐Based Porous Monolith Composites for Atmospheric Water Harvesting

Mahyar Panahi‐Sarmad, Tianyu Guo, Seyyed Alireza Hashemi, Ahmadreza Ghaffarkhah, Stefan Wuttke, Mohammad Arjmand, Orlando J. Rojas and Feng Jiang

Advanced Materials, 2026, 38
DOI: 10.1002/adma.202413353