Fish-on-a-chip: microfluidics for zebrafish research

Fan Yang, Chuan Gao, Ping Wang, Guo-Jun Zhang and Zuanguang Chen

Lab Chip, 2016, 16, 1106
DOI: 10.1039/C6LC00044D

Increasing the functionalities of 3D printed microchemical devices by single material, multimaterial, and print-pause-print 3D printing

Feng Li, Niall P. Macdonald, Rosanne M. Guijt and Michael C. Breadmore

Lab Chip, 2019, 19, 35
DOI: 10.1039/C8LC00826D

Improved bovine embryo production in an oviduct-on-a-chip system: prevention of poly-spermic fertilization and parthenogenic activation

Marcia A. M. M. Ferraz, Heiko H. W. Henning, Pedro F. Costa, Jos Malda, Ferry P. Melchels, R. Wubbolts, Tom A. E. Stout, Peter L. A. M. Vos and Bart M. Gadella

Lab Chip, 2017, 17, 905
DOI: 10.1039/C6LC01566B

Microbioreactor for lower cost and faster optimisation of protein production

Mayur Parekh, AbdulAziz Ali, Zulfiqur Ali, Simon Bateson, Fathi Abugchem, Leon Pybus and Christopher Lennon

Analyst, 2020, 145, 6148
DOI: 10.1039/D0AN01266A

A 3D-printed Arabidopsis thaliana root imaging platform

Michel Moussus and Matthias Meier

Lab Chip, 2021, 21, 2557
DOI: 10.1039/D1LC00149C

The upcoming 3D-printing revolution in microfluidics

Nirveek Bhattacharjee, Arturo Urrios, Shawn Kang and Albert Folch

Lab Chip, 2016, 16, 1720
DOI: 10.1039/C6LC00163G

3D printed microfluidic devices: enablers and barriers

Sidra Waheed, Joan M. Cabot, Niall P. Macdonald, Trevor Lewis, Rosanne M. Guijt, Brett Paull and Michael C. Breadmore

Lab Chip, 2016, 16, 1993
DOI: 10.1039/C6LC00284F

Engineering materials with light: recent progress in digital light processing based 3D printing

Zhi Zhao, Xiaoxiao Tian and Xiaoyan Song

J. Mater. Chem. C, 2020, 8, 13896
DOI: 10.1039/D0TC03548C

Templating synthesis of natural cotton-based hierarchically structured carbon hollow microfibers for high-performance solar vapor generation

Shijun Lei, Dali Huang, Shuhao Liu, Mingfeng Chen, Rong Ma, Minxiang Zeng, Dan Li, Wenchao Ma, Ling Wang and Zhengdong Cheng

J. Mater. Chem. A, 2021, 9, 15346
DOI: 10.1039/D1TA02117F

Vat photopolymerization 3D printed microfluidic devices for organ-on-a-chip applications

Laura A. Milton, Matthew S. Viglione, Louis Jun Ye Ong, Gregory P. Nordin and Yi-Chin Toh

Lab Chip, 2023, 23, 3537
DOI: 10.1039/D3LC00094J

Class II biocompatible E-Shell 300 3D printing material causes severe developmental toxicity in Danio rerio embryos and reduced cell proliferation in vitro – implications for 3D printed microfluidics

Zuzana Nejedlá, David Poustka, Regina Herma, Michaela Liegertová, Marcel Štofik, Jiří Smejkal, Václav Šícha, Pavel Kaule and Jan Malý

RSC Adv., 2021, 11, 16252
DOI: 10.1039/D1RA00305D

Finger-powered fluidic actuation and mixing via MultiJet 3D printing

Eric Sweet, Rudra Mehta, Yifan Xu, Ryan Jew, Rachel Lin and Liwei Lin

Lab Chip, 2020, 20, 3375
DOI: 10.1039/D0LC00488J

Engineering neurovascular organoids with 3D printed microfluidic chips

Idris Salmon, Sergei Grebenyuk, Abdel Rahman Abdel Fattah, Gregorius Rustandi, Thomas Pilkington, Catherine Verfaillie and Adrian Ranga

Lab Chip, 2022, 22, 1615
DOI: 10.1039/D1LC00535A

Biocompatible 3D printed polymers via fused deposition modelling direct C2C12 cellular phenotype in vitro

Rowan P. Rimington, Andrew J. Capel, Steven D. R. Christie and Mark P. Lewis

Lab Chip, 2017, 17, 2982
DOI: 10.1039/C7LC00577F

3D printing of PEEK reactors for flow chemistry and continuous chemical processing

Matthew J. Harding, Sarah Brady, Heather O'Connor, Rafael Lopez-Rodriguez, Matthew D. Edwards, Saoirse Tracy, Denis Dowling, Geoff Gibson, Kevin P. Girard and Steven Ferguson

React. Chem. Eng., 2020, 5, 728
DOI: 10.1039/C9RE00408D

3D-printing of transparent bio-microfluidic devices in PEG-DA

Arturo Urrios, Cesar Parra-Cabrera, Nirveek Bhattacharjee, Alan M. Gonzalez-Suarez, Luis G. Rigat-Brugarolas, Umashree Nallapatti, Josep Samitier, Cole A. DeForest, Francesc Posas, José L. Garcia-Cordero and Albert Folch

Lab Chip, 2016, 16, 2287
DOI: 10.1039/C6LC00153J

Enhanced biocompatibility of 3D printed resin parts via wet autoclave postprocessing: implications for stem cell organ-on-a-chip culture

Alexander Jönsson, Antonia Iatrou, Louise Wildfang, Dana J. Neumann, Hakan Gürbüz, Carina A. A. Schoenmaker, Marlene Danner Dalgaard, Pernille Rose Jensen and Martin Dufva

Mater. Adv., 2025, 6, 2180
DOI: 10.1039/D4MA01191K

A 3D-printed microbial cell culture platform with in situ PEGDA hydrogel barriers for differential substrate delivery

Andrea L. Kadilak, Jessica C. Rehaag, Cameron A. Harrington and Leslie M. Shor

Biomicrofluidics, 2017, 11
DOI: 10.1063/1.5003477

Advances in Solid Phase Microextraction and Perspective on Future Directions

Nathaly Reyes-Garcés, Emanuela Gionfriddo, German Augusto Gómez-Ríos, Md. Nazmul Alam, Ezel Boyacı, Barbara Bojko, Varoon Singh, Jonathan Grandy and Janusz Pawliszyn

Anal. Chem., 2018, 90, 302
DOI: 10.1021/acs.analchem.7b04502

The Field Guide to 3D Printing in Optical Microscopy for Life Sciences

Mario Del Rosario, Hannah S. Heil, Afonso Mendes, Vittorio Saggiomo and Ricardo Henriques

Advanced Biology, 2022, 6
DOI: 10.1002/adbi.202100994

Recent Developments and Applications of 3D-Printing Technology in Pharmaceutical Drug Delivery Systems: A New Research Direction and Future Trends

Surya Kanta Swain, Bikash Ranjan Jena and Rabinarayan Parhi

CPD, 2025, 31, 2
DOI: 10.2174/0113816128309717240826101647

Irreversible, self-aligned microfluidic packaging for chronic implant applications

Emily Szabo and Allison Hess-Dunning

J. Micromech. Microeng., 2021, 31, 095011
DOI: 10.1088/1361-6439/ac1994

A ‘print–pause–print’ protocol for 3D printing microfluidics using multimaterial stereolithography

Yong Tae Kim, Alireza Ahmadianyazdi and Albert Folch

Nat Protoc, 2023, 18, 1243
DOI: 10.1038/s41596-022-00792-6

Fused Deposition Modeling 3D Printing for (Bio)analytical Device Fabrication: Procedures, Materials, and Applications

Gert IJ. Salentijn, Pieter E. Oomen, Maciej Grajewski and Elisabeth Verpoorte

Anal. Chem., 2017, 89, 7053
DOI: 10.1021/acs.analchem.7b00828

Semi-permanent transcorneal filter support and in vivo surgical implantation technique for open-angle glaucoma treatment

Brett Collar, Gabriel Simón, Quan Yuan, Sui Shen and Pedro Irazoqui

Biomed Microdevices, 2019, 21
DOI: 10.1007/s10544-019-0440-7

Additive Manufacturing of Bio-Inspired Microstructures for Bone Tissue Engineering

N. Top, H. Gökçe and I. Şahin

Exp Tech, 2023, 47, 1213
DOI: 10.1007/s40799-023-00630-8

Comparison of axon extension: PTFE versus PLA formed by a 3D printer

Naofumi Kawai, Mizuki Bando, Kento Yuasa and Masayuki Shibasaki

Open Life Sciences, 2022, 17, 302
DOI: 10.1515/biol-2022-0031

Chemicals released from 3D printers and the prevention of workers’ health: a literature review

Kyung-Taek Rim

Toxicol. Environ. Health Sci., 2023, 15, 3
DOI: 10.1007/s13530-022-00158-1

The Role of 3D Printing Technology in Microengineering of Microneedles

Usanee Detamornrat, Emma McAlister, Aaron R. J. Hutton, Eneko Larrañeta and Ryan F. Donnelly

Small, 2022, 18
DOI: 10.1002/smll.202106392

Comparing Microfluidic Performance of Three-Dimensional (3D) Printing Platforms

Niall P. Macdonald, Joan M. Cabot, Petr Smejkal, Rosanne M. Guijt, Brett Paull and Michael C. Breadmore

Anal. Chem., 2017, 89, 3858
DOI: 10.1021/acs.analchem.7b00136

High‐Performance Freshwater Harvesting System by Coupling Solar Desalination and Fog Collection with Hierarchical Porous Microneedle Arrays

Wei Zhou, Cailong Zhou, Chengfei Deng, Li Chen, Xinjuan Zeng, Yaoxin Zhang, Luxi Tan, Baoshan Hu, Shuai Guo, Lichun Dong and Swee Ching Tan

Adv Funct Materials, 2022, 32
DOI: 10.1002/adfm.202113264

Customizable 3D printed perfusion bioreactor for the engineering of stem cell microenvironments

Steven J. Dupard, Alejandro Garcia Garcia and Paul E. Bourgine

Front. Bioeng. Biotechnol., 2023, 10
DOI: 10.3389/fbioe.2022.1081145

The influence of 2,4,6-trimethylbenzoyldiphenylphosphine oxide on the toxicity of dental resins: A systematic review of in vitro studies

Victor de Melo Soares, Andréa Cândido dos Reis and Mariana Lima da Costa Valente

International Journal of Adhesion and Adhesives, 2025, 138, 103922
DOI: 10.1016/j.ijadhadh.2024.103922

Toxicological assessment of additively manufactured methacrylates for medical devices in dentistry

Frank Alifui-Segbaya, Jasper Bowman, Alan R. White, Sony Varma, Graham J. Lieschke and Roy George

Acta Biomaterialia, 2018, 78, 64
DOI: 10.1016/j.actbio.2018.08.007

Three-Dimensionally Printed Agarose Micromold Supports Scaffold-Free Mouse Ex Vivo Follicle Growth, Ovulation, and Luteinization

Emily J. Zaniker, Prianka H. Hashim, Samuel Gauthier, James A. Ankrum, Hannes Campo and Francesca E. Duncan

Bioengineering, 2024, 11, 719
DOI: 10.3390/bioengineering11070719

Developing and characterising bovine decellularized extracellular matrix hydrogels to biofabricate female reproductive tissues

E. Ribes Martinez, Y. Franko, R. Franko, G.A. Ferronato, A.E.S. Viana, E. Windenbach, J.B. Stoeckl, T. Fröhlich and M.A.M.M. Ferraz

Acta Biomaterialia, 2025, 196, 152
DOI: 10.1016/j.actbio.2025.03.009

Can 3D Printing Bring Droplet Microfluidics to Every Lab?—A Systematic Review

Nafisat Gyimah, Ott Scheler, Toomas Rang and Tamas Pardy

Micromachines, 2021, 12, 339
DOI: 10.3390/mi12030339

Recent Advancements in Fish-on-Chip: A Comprehensive Review

Tushar Nath and Hua Tan

Fluids, 2025, 10, 88
DOI: 10.3390/fluids10040088

Biocompatibility of photopolymers for additive manufacturing

Stefan Leonhardt, Martin Klare, Maurice Scheer, Theresa Fischer, Burghard Cordes and Markus Eblenkamp

Current Directions in Biomedical Engineering, 2016, 2, 113
DOI: 10.1515/cdbme-2016-0028

Fully 3D printed integrated reactor array for point-of-care molecular diagnostics

Karteek Kadimisetty, Jinzhao Song, Aoife M. Doto, Young Hwang, Jing Peng, Michael G. Mauk, Frederic D. Bushman, Robert Gross, Joseph N. Jarvis and Changchun Liu

Biosensors and Bioelectronics, 2018, 109, 156
DOI: 10.1016/j.bios.2018.03.009

A Review of Current Methods in Microfluidic Device Fabrication and Future Commercialization Prospects

Bruce K. Gale, Alexander R. Jafek, Christopher J. Lambert, Brady L. Goenner, Hossein Moghimifam, Ugochukwu C. Nze and Suraj Kumar Kamarapu

Inventions, 2018, 3, 60
DOI: 10.3390/inventions3030060

Preliminary Assessment of the Possible Environmental Risks of Photopolymerizing Resin Particles Produced by Finishing Stereolithography 3D-Printed Objects, Employing Toxicity Test on Tropical House Crickets (Gryllodes sigillatus)

Bogumił Łosiewicz and Maciej Kamaszewski

IJMS, 2025, 26, 11245
DOI: 10.3390/ijms262311245

Recent Advances in Analytical Chemistry by 3D Printing

Bethany Gross, Sarah Y. Lockwood and Dana M. Spence

Anal. Chem., 2017, 89, 57
DOI: 10.1021/acs.analchem.6b04344

Biocompatibility of Blank, Post-Processed and Coated 3D Printed Resin Structures with Electrogenic Cells

Cacie Hart, Charles M. Didier, Frank Sommerhage and Swaminathan Rajaraman

Biosensors, 2020, 10, 152
DOI: 10.3390/bios10110152

The recent development and applications of fluidic channels by 3D printing

Yufeng Zhou

J Biomed Sci, 2017, 24
DOI: 10.1186/s12929-017-0384-2

Digital Manufacturing for Microfluidics

Arman Naderi, Nirveek Bhattacharjee and Albert Folch

Annu. Rev. Biomed. Eng., 2019, 21, 325
DOI: 10.1146/annurev-bioeng-092618-020341

FieldNA: a 3D printed vertical microfluidic device for portable nucleic acid isolation from olive oil samples

Vineet Penumarthy, Athanasia-Maria Dourou, Evangelia Lampropoulou, Stilianos Arhondakis and Ravi Prakash

Front. Bioeng. Biotechnol., 2025, 13
DOI: 10.3389/fbioe.2025.1646041

Feasibility and Biocompatibility of 3D‐Printed Photopolymerized and Laser Sintered Polymers for Neuronal, Myogenic, and Hepatic Cell Types

Rowan P. Rimington, Andrew J. Capel, Darren J. Player, Richard J. Bibb, Steven D. R. Christie and Mark P. Lewis

Macromolecular Bioscience, 2018, 18
DOI: 10.1002/mabi.201800113

Biocompatible 3D printing resins for medical applications: A review of marketed intended use, biocompatibility certification, and post-processing guidance

Callum Guttridge, Alice Shannon, Aidan O'Sullivan, Kevin J. O'Sullivan and Leonard W. O'Sullivan

Annals of 3D Printed Medicine, 2022, 5, 100044
DOI: 10.1016/j.stlm.2021.100044

Accuracy and practicability of a patient-specific guide using acetabular superolateral rim during THA in Crowe II/III DDH patients: a retrospective study

Chenggong Wang, Han Xiao, Weiwei Yang, Long Wang, Yihe Hu, Hua Liu and Da Zhong

J Orthop Surg Res, 2019, 14
DOI: 10.1186/s13018-018-1029-1

Leveraging 3D printing to enhance mass spectrometry: A review

M. Grajewski, M. Hermann, R.D. Oleschuk, E. Verpoorte and G.IJ. Salentijn

Analytica Chimica Acta, 2021, 1166, 338332
DOI: 10.1016/j.aca.2021.338332

Photopolymerized 3D Printing Materials for Optical Elements

Yundong Chen, Piaoran Ye, Long Huang, Shaoqing Zhao, Han Zhang, Zhi Wang, Yuqing Liu and Hua Liu

Advanced Optical Materials, 2024, 12
DOI: 10.1002/adom.202302685

Biocompatibility Evaluation and Enhancement of Elastomeric Coatings Made Using Table-Top Optical 3D Printer

Giedre Grigaleviciute, Daiva Baltriukiene, Virginija Bukelskiene and Mangirdas Malinauskas

Coatings, 2020, 10, 254
DOI: 10.3390/coatings10030254

3D Printing of Microfluidic-assisted Liposomes Production for Drug Delivery and Nanobiomedicine: A Review

Kave Mohammad-Jafari and Seyed Morteza Naghib

CMC, 2025, 32, 1553
DOI: 10.2174/0109298673285199231210170549

3D printed mold leachates in PDMS microfluidic devices

Marcia de Almeida Monteiro Melo Ferraz, Jennifer Beth Nagashima, Bastien Venzac, Séverine Le Gac and Nucharin Songsasen

Sci Rep, 2020, 10
DOI: 10.1038/s41598-020-57816-y

Advancing bovine in vitro fertilization through 3D printing: the effect of the 3D printed materials

Ramses Belda-Perez, Sonia Heras, Costanza Cimini, Jon Romero-Aguirregomezcorta, Luca Valbonetti, Alessia Colosimo, Bianca Maria Colosimo, Silvia Santoni, Barbara Barboni, Nicola Bernabò and Pilar Coy

Front. Bioeng. Biotechnol., 2023, 11
DOI: 10.3389/fbioe.2023.1260886

Acute and Chronic Toxicity of Uncured Resin Feedstocks for Vat Photopolymerization 3D Printing to a Cladoceran (Ceriodaphnia Dubia)

Mark Ballentine, Alan Kennedy, Nicolas Melby, Anthony Bednar, Robert Moser, Lee C. Moores, Erik M. Alberts, Charles H. Laber and Rebecca A. Crouch

Bull Environ Contam Toxicol, 2023, 110
DOI: 10.1007/s00128-023-03698-5

3D-printed cellular structures for bone biomimetic implants

Sakkadech Limmahakhun, Adekunle Oloyede, Kriskrai Sitthiseripratip, Yin Xiao and Cheng Yan

Additive Manufacturing, 2017, 15, 93
DOI: 10.1016/j.addma.2017.03.010

Acrylonitrile butadiene styrene (ABS) and polycarbonate (PC) filaments three-dimensional (3-D) printer emissions-induced cell toxicity

Mariana T. Farcas, Aleksandr B. Stefaniak, Alycia K. Knepp, Lauren Bowers, William K. Mandler, Michael Kashon, Stephen R. Jackson, Todd A. Stueckle, Jenifer D. Sisler, Sherri A. Friend, Chaolong Qi, Duane R. Hammond, Treye A. Thomas, Joanna Matheson, Vincent Castranova and Yong Qian

Toxicology Letters, 2019, 317, 1
DOI: 10.1016/j.toxlet.2019.09.013

3D printed microfluidic chip for multiple anticancer drug combinations

Xiaojun Chen, Hong Chen, Dezhi Wu, Qinnan Chen, Zhou Zhou, Rongrong Zhang, Xingyue Peng, Yu-Chuan Su and Daoheng Sun

Sensors and Actuators B: Chemical, 2018, 276, 507
DOI: 10.1016/j.snb.2018.08.121

Development, Fabrication and Application of a Sectioned 3D-Printed Human Nasal Cavity Model for In Vitro Nasal Spray Deposition Studies

Anže Ličen, Jernej Grmaš, Špela Pelcar, Jurij Trontelj, Timi Gomboc, Matjaž Hriberšek and Gregor Harih

Biomedicines, 2026, 14, 329
DOI: 10.3390/biomedicines14020329

Kinetic thermal behavior of nanocellulose filled polylactic acid filament for fused filament fabrication 3D printing

Qianqian Wang, Chencheng Ji, Jianzhong Sun, Qian Yao, Jun Liu, Rana Muhammad Yousaf Saeed and Qianqian Zhu

J of Applied Polymer Sci, 2020, 137
DOI: 10.1002/app.48374

3D printed microfluidic devices: a review focused on four fundamental manufacturing approaches and implications on the field of healthcare

Viraj Mehta and Subha N. Rath

Bio-des. Manuf., 2021, 4, 311
DOI: 10.1007/s42242-020-00112-5

Additive Biotech—Chances, challenges, and recent applications of additive manufacturing technologies in biotechnology

Felix Krujatz, Anja Lode, Julia Seidel, Thomas Bley, Michael Gelinsky and Juliane Steingroewer

New Biotechnology, 2017, 39, 222
DOI: 10.1016/j.nbt.2017.09.001

Surface roughness improvement of 3D printed microchannel

Kunpeng Zhang, Huihui Wang, Kaihan Yao, Gonghan He, Zhou Zhou and Daoheng Sun

J. Micromech. Microeng., 2020, 30, 065003
DOI: 10.1088/1361-6439/ab82f2

3D-printed membrane microvalves and microdecoder

Zhou Zhou, Gonghan He, Kunpeng Zhang, Yang Zhao and Daoheng Sun

Microsyst Technol, 2019, 25, 4019
DOI: 10.1007/s00542-019-04406-2

Desktop fabrication of monolithic soft robotic devices with embedded fluidic control circuits

Yichen Zhai, Albert De Boer, Jiayao Yan, Benjamin Shih, Martin Faber, Joshua Speros, Rohini Gupta and Michael T. Tolley

Sci. Robot., 2023, 8
DOI: 10.1126/scirobotics.adg3792

Developments of 3D Printing Microfluidics and Applications in Chemistry and Biology: a Review

Yong He, Yan Wu, Jian‐zhong Fu, Qing Gao and Jing‐jiang Qiu

Electroanalysis, 2016, 28, 1658
DOI: 10.1002/elan.201600043

Testis-on-chip platform to study ex vivo primate spermatogenesis and endocrine dynamics

Swati Sharma, Bastien Venzac, Thomas Burgers, Stefan Schlatt and Séverine Le Gac

Organs-on-a-Chip, 2022, 4, 100023
DOI: 10.1016/j.ooc.2022.100023

3D printing of very soft elastomer and sacrificial carbohydrate glass/elastomer structures for robotic applications

Armita Hamidi and Yonas Tadesse

Materials & Design, 2020, 187, 108324
DOI: 10.1016/j.matdes.2019.108324

Microfluidic chip fabrication and performance analysis of 3D printed material for use in microfluidic nucleic acid amplification applications

Charalampos Tzivelekis, Matthew P Selby, Albert Batet, Hojjat Madadi and Kenny Dalgarno

J. Micromech. Microeng., 2021, 31, 035005
DOI: 10.1088/1361-6439/abd9a9

Extrusion-based systems for topical and transdermal drug delivery

Ana Luiza Lima, Idejan P. Gross, Lívia Lira de Sá-Barreto, Tais Gratieri, Guilherme Martins Gelfuso and Marcilio Cunha-Filho

Expert Opinion on Drug Delivery, 2023, 20, 979
DOI: 10.1080/17425247.2023.2241362

Rapid Fabrication of Chip‐Based Physiometers for Neurobehavioral Toxicity Assays Using Rotifers Brachionus calyciflorus

Rhys Cartlidge and Donald Wlodkowic

Cytometry Pt A, 2018, 93, 837
DOI: 10.1002/cyto.a.23510

Ecotoxicty of 3D printing material Polylactic Acid (PLA) on sea urchin Paracentrotus lividus

Özlem Çakal Arslan, Kaan Arslan and Başak Topçu

J. Toxicol. Stud., 2024, 2, 1326
DOI: 10.59400/jts.v2i1.1326

Volatile Compound Emissions from Stereolithography Three-Dimensional Printed Cured Resin Models for Biomedical Applications

Y Lan Pham, Wojciech Wojnowski and Jonathan Beauchamp

Chem. Res. Toxicol., 2023, 36, 369
DOI: 10.1021/acs.chemrestox.2c00317

Advanced optical methods and materials for fabricating 3D tissue scaffolds

Xiaobo Li, Wanping Lu, Xiayi Xu, Yintao Wang and Shih-Chi Chen

gxjzz, 2022, 3, 1
DOI: 10.37188/lam.2022.026

Designing Minimally Invasive Preocular Contact Tips for Potential Application in Tear Collection

Seung Ho Lee, Yong Chan Cho, Dong Yeon Nam, Beom Kang Huh, Se-Na Kim, Dong Hoon Lee, Chun Gwon Park and Young Bin Choy

Cornea, 2018, 37, 1163
DOI: 10.1097/ICO.0000000000001603

Designing 3-Dimensional In Vitro Oviduct Culture Systems to Study Mammalian Fertilization and Embryo Production

Marcia A. M. M. Ferraz, Heiko H. W. Henning, Tom A. E. Stout, Peter L. A. M. Vos and Bart M. Gadella

Ann Biomed Eng, 2017, 45, 1731
DOI: 10.1007/s10439-016-1760-x

Biocompatibility of Photopolymers in 3D Printing

Frank Alifui-Segbaya, Sony Varma, Graham J. Lieschke and Roy George

3D Printing and Additive Manufacturing, 2017, 4, 185
DOI: 10.1089/3dp.2017.0064

Fabrication routes via projection stereolithography for 3D-printing of microfluidic geometries for nucleic acid amplification

Charalampos Tzivelekis, Pavlos Sgardelis, Kevin Waldron, Richard Whalley, Dehong Huo, Kenny Dalgarno and Andreas Offenhausser

PLoS ONE, 2020, 15, e0240237
DOI: 10.1371/journal.pone.0240237

Characterization of 3D-Printed Moulds for Soft Lithography of Millifluidic Devices

Nurul Mohd Fuad, Megan Carve, Jan Kaslin and Donald Wlodkowic

Micromachines, 2018, 9, 116
DOI: 10.3390/mi9030116

3D-Printed PLA Medical Devices: Physicochemical Changes and Biological Response after Sterilisation Treatments

Sara Pérez-Davila, Laura González-Rodríguez, Raquel Lama, Miriam López-Álvarez, Ana Leite Oliveira, Julia Serra, Beatriz Novoa, Antonio Figueras and Pío González

Polymers, 2022, 14, 4117
DOI: 10.3390/polym14194117

Tree-inspired nanofiber aerogel with vertically aligned microchannels for salt-resistant solar desalination and oil-in-water emulsion separation

Wenxuan Cao, Min Zhang, Yixin Zhang, Qinwei Fan, Shuang Chen, Siying Xu, Wenjing Ma, Ranhua Xiong and Chaobo Huang

Journal of Membrane Science, 2025, 719, 123723
DOI: 10.1016/j.memsci.2025.123723

Potential Health and Environmental Risks of Three-Dimensional Engineered Polymers

Marcia de Almeida Monteiro Melo Ferraz, Heiko H. W. Henning, Pedro Ferreira da Costa, Jos Malda, Séverine Le Gac, Fabrice Bray, Majorie B. M. van Duursen, Jos F. Brouwers, Chris H. A. van de Lest, Ingeborg Bertijn, Lisa Kraneburg, Peter L. A. M. Vos, Tom A. E. Stout and Barend M. Gadella

Environ. Sci. Technol. Lett., 2018, 5, 80
DOI: 10.1021/acs.estlett.7b00495

Identification of effective control technologies for additive manufacturing

Johan du Plessis, Sonette du Preez and Aleksandr B. Stefaniak

Journal of Toxicology and Environmental Health, Part B, 2022, 25, 211
DOI: 10.1080/10937404.2022.2092569

Regenerative Medicine, Disease Modelling, and Drug Discovery in Human Pluripotent Stem Cell-Derived Kidney Tissue

Navin Gupta, Koichiro Susa and Ryuji Morizane

EMJ Repro Health, 2017, 57
DOI: 10.33590/emjreprohealth/10310989

3D-Printed Chips: Compatibility of Additive Manufacturing Photopolymeric Substrata with Biological Applications

Megan Carve and Donald Wlodkowic

Micromachines, 2018, 9, 91
DOI: 10.3390/mi9020091

Design considerations of benchtop fluid flow bioreactors for bio-engineered tissue equivalents in vitro

H.W. Hoyle, C.M.L. Stenger and S.A. Przyborski

Biomaterials and Biosystems, 2022, 8, 100063
DOI: 10.1016/j.bbiosy.2022.100063

Smart and sustainable nano-biosensing technologies for advancing stress detection and management in agriculture and beyond

Melina Sarabandi, Meisam Zargar, Abazar Ghorbani and Moxian Chen

Industrial Crops and Products, 2025, 226, 120713
DOI: 10.1016/j.indcrop.2025.120713

Acute health effects of desktop 3D printing (fused deposition modeling) using acrylonitrile butadiene styrene and polylactic acid materials: An experimental exposure study in human volunteers

I. Gümperlein, E. Fischer, G. Dietrich-Gümperlein, S. Karrasch, D. Nowak, R. A. Jörres and R. Schierl

Indoor Air, 2018, 28, 611
DOI: 10.1111/ina.12458

Bioprinting: A review of processes, materials and applications

Bengi Yilmaz, Ans Al Rashid, Younss Ait Mou, Zafer Evis and Muammer Koç

Bioprinting, 2021, 23, e00148
DOI: 10.1016/j.bprint.2021.e00148

Low-Cost Resin 3-D Printing for Rapid Prototyping of Microdevices: Opportunities for Supporting Aquatic Germplasm Repositories

Nikolas C. Zuchowicz, Jorge A. Belgodere, Yue Liu, Ignatius Semmes, William Todd Monroe and Terrence R. Tiersch

Fishes, 2022, 7, 49
DOI: 10.3390/fishes7010049

Photocurable Nitric Oxide‐Releasing Copolyester for the 3D Printing of Bioresorbable Vascular Stents

Matheus F. de Oliveira, Laura C. E. da Silva, Daniele M. Catori, Marcos V. Lorevice, Karen E. A. Galvão, Ana L. G. Millás and Marcelo G. de Oliveira

Macromolecular Bioscience, 2023, 23
DOI: 10.1002/mabi.202200448

Recent applications of parylene and pyrolyzed parylene in sensors and devices: a review

He Zhao and B. Jill Venton

Anal Bioanal Chem, 2026, 418, 499
DOI: 10.1007/s00216-025-06150-1

Fishing anti(lymph)angiogenic drugs with zebrafish

Melissa García-Caballero, Ana R. Quesada, Miguel A. Medina and Manuel Marí-Beffa

Drug Discovery Today, 2018, 23, 366
DOI: 10.1016/j.drudis.2017.10.018

Recent advances in pharmaceutical dosage forms and devices using additive manufacturing technologies

Christos I. Gioumouxouzis, Christina Karavasili and Dimitrios G. Fatouros

Drug Discovery Today, 2019, 24, 636
DOI: 10.1016/j.drudis.2018.11.019

3D-Printed High-Pressure-Resistant Immobilized Enzyme Microreactor (μIMER) for Protein Analysis

Tobias Rainer, Anna-Sophia Egger, Ricarda Zeindl, Martin Tollinger, Marcel Kwiatkowski and Thomas Müller

Anal. Chem., 2022, 94, 8580
DOI: 10.1021/acs.analchem.1c05232

Past, Present, and Future of Soft‐Tissue Prosthetics: Advanced Polymers and Advanced Manufacturing

Sean K. Powell, Rena L. J. Cruz, Maureen T. Ross and Maria A. Woodruff

Advanced Materials, 2020, 32
DOI: 10.1002/adma.202001122

ScreenCube: A 3D Printed System for Rapid and Cost-Effective Chemical Screening in Adult Zebrafish

Adrian T. Monstad-Rios, Claire J. Watson and Ronald Y. Kwon

Zebrafish, 2018, 15, 1
DOI: 10.1089/zeb.2017.1488

Applications of 3D printing technologies in oceanography

Javeed Shaikh Mohammed

Methods in Oceanography, 2016, 17, 97
DOI: 10.1016/j.mio.2016.08.001

3D-Printed High-Density Droplet Array Chip for Miniaturized Protein Crystallization Screening under Vapor Diffusion Mode

Yi-Ran Liang, Li-Na Zhu, Jie Gao, Hong-Xia Zhao, Ying Zhu, Sheng Ye and Qun Fang

ACS Appl. Mater. Interfaces, 2017, 9, 11837
DOI: 10.1021/acsami.6b15933

Soil Protists Can Actively Redistribute Beneficial Bacteria along Medicago truncatula Roots

Christopher J. Hawxhurst, Jamie L. Micciulla, Charles M. Bridges, Mikhael Shor, Daniel J. Gage, Leslie M. Shor and Irina S. Druzhinina

Appl Environ Microbiol, 2023, 89
DOI: 10.1128/aem.01819-22

3D Printing Polymeric Materials for Robots with Embedded Systems

Ray Noel Medina Delda, Rex Balisalisa Basuel, Rodel Peralta Hacla, Dan William Carpiano Martinez, John-John Cabibihan and John Ryan Cortez Dizon

Technologies, 2021, 9, 82
DOI: 10.3390/technologies9040082

Direct 3D printed biocompatible microfluidics: assessment of human mesenchymal stem cell differentiation and cytotoxic drug screening in a dynamic culture system

Oliver Riester, Stefan Laufer and Hans-Peter Deigner

J Nanobiotechnol, 2022, 20
DOI: 10.1186/s12951-022-01737-7

Highly Biocompatible, Underwater Superhydrophilic and Multifunctional Biopolymer Membrane for Efficient Oil–Water Separation and Aqueous Pollutant Removal

Minxiang Zeng, Ian Echols, Pingmei Wang, Shijun Lei, Jianhui Luo, Baoliang Peng, Lipeng He, Lecheng Zhang, Dali Huang, Carlos Mejia, Ling Wang, M. Sam Mannan and Zhengdong Cheng

ACS Sustainable Chem. Eng., 2018, 6, 3879
DOI: 10.1021/acssuschemeng.7b04219

Microfluidics for the study of mechanotransduction

Christian M Griffith, Stephanie A Huang, Crescentia Cho, Tanmay M Khare, Matthew Rich, Gi-hun Lee, Frances S Ligler, Brian O Diekman and William J Polacheck

J. Phys. D: Appl. Phys., 2020, 53, 224004
DOI: 10.1088/1361-6463/ab78d4

Adapter-based Safety Injection System for Prevention of Wrong Route and Wrong Patient Medication Errors

Yong Chan Cho, Seung Ho Lee, Yang Hyun Cho and Young Bin Choy

J Korean Med Sci, 2017, 32, 1938
DOI: 10.3346/jkms.2017.32.12.1938

Chemical Emissions from Cured and Uncured 3D-Printed Ventilator Patient Circuit Medical Parts

Jordan E. Krechmer, Brennan Phillips, Nicholas Chaloux, Russell Shomberg, Conner Daube, Gaurav Manchanda, Sam Murray, Alex McCarthy, Rodrigo Fonseca, Jinen Thakkar, Brice Loose, Scott C. Herndon, John T. Jayne, Douglas R. Worsnop and Manjula R. Canagaratna

ACS Omega, 2021, 6, 30726
DOI: 10.1021/acsomega.1c04695

Fabrication of 3D-printed molds for polydimethylsiloxane-based microfluidic devices using a liquid crystal display-based vat photopolymerization process: printing quality, drug response and 3D invasion cell culture assays

Matthew D. Poskus, Tuo Wang, Yuxuan Deng, Sydney Borcherding, Jake Atkinson and Ioannis K. Zervantonakis

Microsyst Nanoeng, 2023, 9
DOI: 10.1038/s41378-023-00607-y

Biomedical photopolymers in 3D printing

Frank Alifui-Segbaya

RPJ, 2019, 26, 437
DOI: 10.1108/RPJ-10-2018-0268

Nano-liter perfusion microfluidic device made entirely by two-photon polymerization for dynamic cell culture with easy cell recovery

Hanna J. McLennan, Adam J. Blanch, Samuel J. Wallace, Lesley J. Ritter, Shauna L. Heinrich, David K. Gardner, Kylie R. Dunning, Marty J. Gauvin, Allison K. Love and Jeremy G. Thompson

Sci Rep, 2023, 13
DOI: 10.1038/s41598-023-27660-x

A Micro-Optic Stalk (μOS) System to Model the Collective Migration of Retinal Neuroblasts

Stephanie Zhang, Miles Markey, Caroline D. Pena, Tadmiri Venkatesh and Maribel Vazquez

Micromachines, 2020, 11, 363
DOI: 10.3390/mi11040363

Integrated QSAR and Adverse Outcome Pathway Analysis of Chemicals Released on 3D Printing Using Acrylonitrile Butadiene Styrene

Shraddha Pandit, Prakrity Singh, Meetali Sinha and Ramakrishnan Parthasarathi

Chem. Res. Toxicol., 2021, 34, 355
DOI: 10.1021/acs.chemrestox.0c00274

Integrated Printed Microfluidic Biosensors

Jacky F.C. Loo, Aaron H.P. Ho, Anthony P.F. Turner and Wing Cheung Mak

Trends in Biotechnology, 2019, 37, 1104
DOI: 10.1016/j.tibtech.2019.03.009

3D printed autoclavable biocompatible biodegradable bioreactor vessels with integrated sparger made from poly-lactic acid

Lena Achleitner, Martina Winter and Peter Satzer

Journal of Biotechnology, 2024, 391, 33
DOI: 10.1016/j.jbiotec.2024.06.001

Ecotoxicity of 3D printing material polylactic acid (PLA) on sea urchin Paracentrotus lividus

Özlem Çakal Arslan, Kaan Arslan and Başak Topçu

J. Toxicol. Stud., 2024, 2, 1326
DOI: 10.59400/jts.v2i2.1326

Assessing cytotoxicity: a comparative analysis of biodegradable and conventional 3D-printing materials post-steam sterilization for surgical guides

Matthias W Gielisch, Daniel G E Thiem, Ulrike Ritz, Christoph Bösing, Bilal Al-Nawas and Peer W Kämmerer

Biomed. Mater., 2025, 20, 015001
DOI: 10.1088/1748-605X/ad8c8a

A review of three-dimensional printing for pharmaceutical applications: Quality control, risk assessment and future perspectives

Rabinarayan Parhi

Journal of Drug Delivery Science and Technology, 2021, 64, 102571
DOI: 10.1016/j.jddst.2021.102571

Materials Characterization of Stereolithography 3D Printed Polymer to Develop a Self-Driven Microfluidic Device for Bioanalytical Applications

Britanny L. Stark, Michelle Gamboa, Aibhlin Esparza, Truman J. Cavendar-Word, Diego Bermudez, Luisa Carlon, David A. Roberson, Binata Joddar and Sylvia Natividad-Diaz

ACS Appl. Bio Mater., 2024, 7, 7883
DOI: 10.1021/acsabm.4c00059

Three-Dimensional (3D) Printed Microneedles for Microencapsulated Cell Extrusion

Chantell Farias, Roman Lyman, Cecilia Hemingway, Huong Chau, Anne Mahacek, Evangelia Bouzos and Maryam Mobed-Miremadi

Bioengineering, 2018, 5, 59
DOI: 10.3390/bioengineering5030059

Human exposure to metals in consumer-focused fused filament fabrication (FFF)/ 3D printing processes

Getachew Tedla, Annie M. Jarabek, Peter Byrley, William Boyes and Kim Rogers

Science of The Total Environment, 2022, 814, 152622
DOI: 10.1016/j.scitotenv.2021.152622

A review on spacers and membranes: Conventional or hybrid additive manufacturing?

Jing Wee Koo, Jia Shin Ho, Jia An, Yi Zhang, Chee Kai Chua and Tzyy Haur Chong

Water Research, 2021, 188, 116497
DOI: 10.1016/j.watres.2020.116497

Parylene-C Coating Protects Resin-3D-Printed Devices from Material Erosion and Prevents Cytotoxicity toward Primary Cells

Hannah B. Musgrove, Sophie R. Cook and Rebecca R. Pompano

ACS Appl. Bio Mater., 2023, 6, 3079
DOI: 10.1021/acsabm.3c00444

Functional 3D Printing for Microfluidic Chips

Gregor Weisgrab, Aleksandr Ovsianikov and Pedro F. Costa

Adv Materials Technologies, 2019, 4
DOI: 10.1002/admt.201900275

Toxicity risks of occupational exposure in 3D printing and bioprinting industries: A systematic review

Yousef Mohammadian and Nafiseh Nasirzadeh

Toxicol Ind Health, 2021, 37, 573
DOI: 10.1177/07482337211031691

Smart pH-Responsive Antimicrobial Hydrogel Scaffolds Prepared by Additive Manufacturing

Carolina Garcia, Alberto Gallardo, Daniel López, Carlos Elvira, Asma Azzahti, Elena Lopez-Martinez, Aitziber L. Cortajarena, Carmen M. González-Henríquez, Mauricio A. Sarabia-Vallejos and Juan Rodríguez-Hernández

ACS Appl. Bio Mater., 2018, 1, 1337
DOI: 10.1021/acsabm.8b00297

Fibroblast behavior on conventionally processed, milled, and printed occlusal device materials with different surface treatments

Vivien Bieger, Florian M. Thieringer, Jens Fischer and Nadja Rohr

The Journal of Prosthetic Dentistry, 2023, 129, 939
DOI: 10.1016/j.prosdent.2021.08.015

Effects of heat-treatment methods on cytocompatibility and mechanical properties of dental products 3D-printed using photopolymerized resin

Na-Eun Nam, Na-Kyung Hwangbo, Gan Jin, June-Sung Shim and Jong-Eun Kim

J Prosthodont Res, 2023, 67, 121
DOI: 10.2186/jpr.JPR_D_21_00345

Effects of post-curing duration on the mechanical properties of complex 3D printed geometrical parts

Callum Guttridge, Alice Shannon, Aidan O'Sullivan, Kevin J. O'Sullivan and Leonard W. O'Sullivan

Journal of the Mechanical Behavior of Biomedical Materials, 2024, 156, 106585
DOI: 10.1016/j.jmbbm.2024.106585

Polymers for additive manufacturing and 4D-printing: Materials, methodologies, and biomedical applications

Carmen M. González-Henríquez, Mauricio A. Sarabia-Vallejos and Juan Rodriguez-Hernandez

Progress in Polymer Science, 2019, 94, 57
DOI: 10.1016/j.progpolymsci.2019.03.001

Environmental Dimensions of Additive Manufacturing: Mapping Application Domains and Their Environmental Implications

Karel Kellens, Martin Baumers, Timothy G. Gutowski, William Flanagan, Reid Lifset and Joost R. Duflou

J of Industrial Ecology, 2017, 21
DOI: 10.1111/jiec.12629

Additives migrating from 3D-printed plastic induce developmental toxicity and neuro-behavioural alterations in early life zebrafish (Danio rerio)

Milanga Walpitagama, Megan Carve, Alon M. Douek, Charlene Trestrail, Yutao Bai, Jan Kaslin and Donald Wlodkowic

Aquatic Toxicology, 2019, 213, 105227
DOI: 10.1016/j.aquatox.2019.105227

Unlocking the potential of 3D printed microfluidics for mass spectrometry analysis using liquid infused surfaces

Jing Wang, Kathrine Curtin, Stephen J. Valentine and Peng Li

Analytica Chimica Acta, 2023, 1279, 341792
DOI: 10.1016/j.aca.2023.341792

3D Printing-Induced Fine Particle and Volatile Organic Compound Emission: An Emerging Health Risk

Ke Min, Yong Li, Dingyi Wang, Bo Chen, Ming Ma, Ligang Hu, Qian Liu and Guibin Jiang

Environ. Sci. Technol. Lett., 2021, 8, 616
DOI: 10.1021/acs.estlett.1c00311

Three-Dimensional Printed Devices in Droplet Microfluidics

Jia Zhang, Qinglei Ji and Huiling Duan

Micromachines, 2019, 10, 754
DOI: 10.3390/mi10110754

Progress of Additive Manufacturing Technology and Its Medical Applications

Anne Bastin and Xiao Huang

ASME Open Journal of Engineering, 2022, 1
DOI: 10.1115/1.4054947