Bimetallic aluminum complexes bearing novel spiro-phenanthrene-monoketone/OH derivatives: synthesis, characterization and the ring-opening polymerization of ε-caprolactone

Erlin Yue, Furong Cao, Jun Zhang, Wenjuan Zhang, Youshu Jiang, Tongling Liang and Wen-Hua Sun

RSC Adv., 2021, 11, 13274
DOI: 10.1039/D1RA01288F

Sodium iminoquinolates with cubic and hexagonal prismatic motifs: synthesis, characterization and their catalytic behavior toward the ROP of rac-lactide

Qiurui Zhang, Wenjuan Zhang, Shengdong Wang, Gregory A. Solan, Tongling Liang, Natesan Mannangatti Rajendran and Wen-Hua Sun

Inorg. Chem. Front., 2016, 3, 1178
DOI: 10.1039/C6QI00155F

Graphene induced microstructural changes of PLA/MWCNT biodegradable nanocomposites: rheological, morphological, thermal and electrical properties

Amir Rostami, Hossein Nazockdast and Mohammad Karimi

RSC Adv., 2016, 6, 49747
DOI: 10.1039/C6RA08345E

Synthesis and structural characterization of titanium and zirconium complexes containing half-salen ligands as catalysts for polymerization reactions

Mrinmay Mandal, Uwe Monkowius and Debashis Chakraborty

New J. Chem., 2016, 40, 9824
DOI: 10.1039/C6NJ02148D

Electrospinning of sustainable polymers from biomass for active food packaging

Fuat Topuz and Tamer Uyar

Sustainable Food Technol., 2024, 2, 1266
DOI: 10.1039/D4FB00147H

Biobased building blocks for the rational design of renewable block polymers

Angela L. Holmberg, Kaleigh H. Reno, Richard P. Wool and Thomas H. Epps, III

Soft Matter, 2014, 10, 7405
DOI: 10.1039/C4SM01220H

Novel method for producing plasticised PLA films: method, materials, and characterization

Gerardo Coppola, Sebastiano Candamano, Catia Algieri, Corradino Sposato, Chiara Morano, Leonardo Pagnotta, Mariano Davoli, Stefano Curcio and Sudip Chakraborty

RSC Adv., 2026, 16, 11594
DOI: 10.1039/D5RA07926H

Synergistic effect of stereocomplex crystals and shear flow on the crystallization rate of poly(l-lactic acid): A rheological study

Xin-Feng Wei, Rui-Ying Bao, Li Gu, Yu Wang, Kai Ke, Wei Yang, Bang-Hu Xie, Ming-Bo Yang, Tao Zhou and Ai-Min Zhang

RSC Adv., 2014, 4, 2733
DOI: 10.1039/C3RA45402A

Dinuclear iminophenoxide copper complexes in rac-lactide polymerisation

Pargol Daneshmand, Leena Pinon and Frank Schaper

Dalton Trans., 2018, 47, 10147
DOI: 10.1039/C8DT02140F

Environmental feasibility of sustainable co-production of xylooligosaccharides and bioplastic from poplar sawdust

Xiaoxue Zhao, Ruolin Li, Qiang Yong, Caoxing Huang and Kai Lan

Green Chem., 2025, 27, 9480
DOI: 10.1039/D5GC01539A

Configurationally flexible zinc complexes as catalysts for rac-lactide polymerisation

Pargol Daneshmand, Ina Michalsky, Pedro M. Aguiar and Frank Schaper

Dalton Trans., 2018, 47, 16279
DOI: 10.1039/C8DT02562B

In situ nano-fibrillation of microinjection molded poly(lactic acid)/poly(ε-caprolactone) blends and comparison with conventional injection molding

Weiwei Ding, Yinghong Chen, Zhuo Liu and Sen Yang

RSC Adv., 2015, 5, 92905
DOI: 10.1039/C5RA15402B

Ring-opening polymerization of rac-lactide mediated by tetrametallic lithium and sodium diamino-bis(phenolate) complexes

Dalal Alhashmialameer, Nduka Ikpo, Julie Collins, Louise N. Dawe, Karen Hattenhauer and Francesca M. Kerton

Dalton Trans., 2015, 44, 20216
DOI: 10.1039/C5DT03119B

One-pot transformation of polysaccharides via multi-catalytic processes

Hu Li, Pinaki S. Bhadury, Anders Riisager and Song Yang

Catal. Sci. Technol., 2014, 4, 4138
DOI: 10.1039/C4CY00711E

Melt-compounded polylactic acid composite hybrids with hydroxyapatite nanorods and silver nanoparticles: biodegradation, antibacterial ability, bioactivity and cytotoxicity

Chen Liu, Kai Wang Chan, Jie Shen, Hoi Man Wong, Kelvin Wai Kwok Yeung and Sie Chin Tjong

RSC Adv., 2015, 5, 72288
DOI: 10.1039/C5RA14155A

Interfacial strength and mechanical properties of biocomposites based on ramie fibers and poly(butylene succinate)

Mi Zhou, Jiajie Yan, Yuhan Li, Chengzhen Geng, Chao He, Ke Wang and Qiang Fu

RSC Adv., 2013, 3, 26418
DOI: 10.1039/c3ra43713b

The effects of different inorganic salts on the structure and properties of ionic liquid plasticized starch/poly(butylene succinate) blends

Zhixin Zhao, Bei Lei, Wenhao Du, Zhaojie Yang, Danyang Tao, Yuanfang Tian, Jin Xu and Xi Zhang

RSC Adv., 2020, 10, 3756
DOI: 10.1039/C9RA08218B

Photo-triggered enzymatic degradation of biodegradable polymers

Yoshihiro Kikkawa, Satoko Tanaka and Yasuo Norikane

RSC Adv., 2017, 7, 55720
DOI: 10.1039/C7RA10598C

Preferential formation of specific hexose and heptose in the formose reaction under microwave irradiation

Akihito Hashidzume, Toru Imai, Nanako Deguchi, Takashi Tanibayashi, Takumi Ikeda, Tomohiro Michitaka, Satoki Kuwahara, Masaki Nakahata, Yuri Kamon and Yasuto Todokoro

RSC Adv., 2023, 13, 4089
DOI: 10.1039/D2RA07249A

Cyclic polylactide synthesis initiated by a lithium anthraquinoid: understanding the selectivity through DFT and diffusion NMR

Cristina Ruiz Martínez, Juana M. Pérez, Francisco M. Arrabal-Campos, María Batuecas, Manuel A. Ortuño and Ignacio Fernández

Polym. Chem., 2021, 12, 4083
DOI: 10.1039/D1PY00547B

Composites of poly(lactic) acid/thermoplastic polyurethane/mica with compatibilizer: morphology, miscibility and interphase

Shikui Jia, Zhong Wang, Yan Zhu, LiGui Chen and Lei Fu

RSC Adv., 2015, 5, 98915
DOI: 10.1039/C5RA17938F

Exploring the reactivity of manganese(iii) complexes with diphenolate-diamino ligands in rac-lactide polymerization

Pargol Daneshmand and Frank Schaper

Dalton Trans., 2015, 44, 20449
DOI: 10.1039/C5DT03756E

Sustainable polyacetals from isohexides

B. S. Rajput, S. R. Gaikwad, S. K. Menon and S. H. Chikkali

Green Chem., 2014, 16, 3810
DOI: 10.1039/C4GC00543K

High performance low-k cyanate ester resins with a thermally stable cyclodextrin microsphere

Yannan Tang, Li Yuan, Guozheng Liang and Aijuan Gu

RSC Adv., 2014, 4, 16136
DOI: 10.1039/C4RA00750F

Biobased copolyesters from renewable resources: synthesis and crystallization behavior of poly(decamethylene sebacate-co-isosorbide sebacate)

Zhiyong Wei, Cheng Zhou, Yang Yu and Yang Li

RSC Adv., 2015, 5, 42777
DOI: 10.1039/C5RA04761G

Stereoselective polymerization of rac-lactide catalyzed by zwitterionic calcium complexes

Na Liu, Doudou Liu, Bo Liu, Hao Zhang and Dongmei Cui

Polym. Chem., 2021, 12, 1518
DOI: 10.1039/D0PY01397H

Pathway to fully-renewable biobased polyesters derived from HMF and phenols

Jalal Tavana, Atik Faysal, Anushka Vithanage, William M. Gramlich and Thomas J. Schwartz

Polym. Chem., 2022, 13, 1215
DOI: 10.1039/D1PY01441B

Micro-fibrillated cellulose reinforced eco-friendly polymeric resin from non-edible ‘Jatropha curcas’ seed waste after biodiesel production

Muhammad M. Rahman and Anil N. Netravali

RSC Adv., 2016, 6, 47101
DOI: 10.1039/C6RA07749H

A lactic acid dioxolane as a bio-based solvent for lithium-ion batteries: physicochemical and electrochemical investigations of lithium imide-based electrolytes

Massimo Melchiorre, Khai Shin Teoh, Juan Luis Gómez Urbano, Francesco Ruffo and Andrea Balducci

Green Chem., 2025, 27, 5040
DOI: 10.1039/D4GC05476H

Poly(lactic acid) (PLA) and polyhydroxyalkanoates (PHAs), green alternatives to petroleum-based plastics: a review

Ahmed Z. Naser, I. Deiab and Basil M. Darras

RSC Adv., 2021, 11, 17151
DOI: 10.1039/D1RA02390J

Lithium, sodium, potassium and calcium amine-bis(phenolate) complexes in the ring-opening polymerization of rac-lactide

Katalin Devaine-Pressing, Fabio J. Oldenburg, Jan P. Menzel, Maximilian Springer, Louise N. Dawe and Christopher M. Kozak

Dalton Trans., 2020, 49, 1531
DOI: 10.1039/C9DT04561A

Facile green ring-opening polymerization of l-lactide catalyzed by natural kaoline

Jie Gao, Feng Bao, Duo Wang, Rui Ma, Sanfeng Jiang, Xu Zhang, Yanjin Yao, Xiaobing Han and Chunjie Yan

Polym. Chem., 2015, 6, 3083
DOI: 10.1039/C5PY00102A

Preparation of cellulose-graft-polylactic acid via melt copolycondensation for use in polylactic acid based composites: synthesis, characterization and properties

Sun Hua, Feng Chen, Zheng-ying Liu, Wei Yang and Ming-bo Yang

RSC Adv., 2016, 6, 1973
DOI: 10.1039/C5RA23182E

Synthesis and properties of biodegradable poly(ethylene succinate) containing two adjacent side methyl groups

Zhiyi Sun, Mingkun Chen, Gang Xie, Zhiguo Jiang and Zhaobin Qiu

Polymer, 2023, 283, 126300
DOI: 10.1016/j.polymer.2023.126300

Biochemical biorefinery: A low-cost and non-waste concept for promoting sustainable circular bioeconomy

Victor C. Igbokwe, Flora N. Ezugworie, Chukwudi O. Onwosi, Godwin O. Aliyu and Chinonye J. Obi

Journal of Environmental Management, 2022, 305, 114333
DOI: 10.1016/j.jenvman.2021.114333

In vitro evaluation of novel composite bioceramic filaments for alveolar bone regeneration

Yu Ting Li, Ju-Hsuan Yang, Yu-Hsin Chang, Hao-Hueng Chang and Chun-Pin Lin

Journal of Dental Sciences, 2025, 20, 2084
DOI: 10.1016/j.jds.2025.07.012

Synthesis of Renewable Copolyacetals with Tunable Degradation

Bhausaheb S. Rajput, Umesh Chander, Kailash Arole, Florian Stempfle, Shamal Menon, Stefan Mecking and Samir H. Chikkali

Macromol. Chem. Phys., 2016, 217, 1396
DOI: 10.1002/macp.201600071

Meet Our Associate Editor

Digambar Vitthal Gokhale

BIOT, 2019, 13, 89
DOI: 10.2174/187220831302190329092506

An overview of biodegradable poly (lactic acid) production from fermentative lactic acid for biomedical and bioplastic applications

Ashfaq Ahmad, Fawzi Banat, Habiba Alsafar and Shadi W. Hasan

Biomass Conv. Bioref., 2024, 14, 3057
DOI: 10.1007/s13399-022-02581-3

Comparative Analysis of Lignocellulose Agricultural Waste and Pre-treatment Conditions with FTIR and Machine Learning Modeling

Manali J. Pancholi, Anand Khristi, Athira K. M. and Debjani Bagchi

Bioenerg. Res., 2023, 16, 123
DOI: 10.1007/s12155-022-10444-y

Development of nanocellulose-reinforced PLA nanocomposite by using maleated PLA (PLA-g-MA)

Somayeh Ghasemi, Rabi Behrooz, Ismail Ghasemi, Reza Shahbazian Yassar and Fei Long

Journal of Thermoplastic Composite Materials, 2018, 31, 1090
DOI: 10.1177/0892705717734600

Life cycle assessment of bioproducts from bamboo residues with biphasic phenoxyethanol-acid based biorefinery technology

Caoxing Huang, Ruolin Li, Yayue Zheng and Kai Lan

Chemical Engineering Journal, 2024, 489, 151181
DOI: 10.1016/j.cej.2024.151181

Toughening modification of diglycerol-based polylactide networks by incorporating poly(propylene sebacate) segments

Ayaka Shibita, Haruka Abe, Shohei Matsuda and Mitsuhiro Shibata

European Polymer Journal, 2016, 85, 105
DOI: 10.1016/j.eurpolymj.2016.10.017

Structural Features and Transport Properties of Hybrid Membranes Based on Polylactide with Additives of Star-Shaped Macromolecules

A. Yu. Pulyalina, M. E. Gogunov, O. R. Karpukhin, I. S. Kuryndin, A. V. Aksentiev and G. A. Polotskaya

Membr. Membr. Technol., 2025, 7, 178
DOI: 10.1134/S2517751625600840

Preparation of silver nanoparticles by using the hydrolyzates of poly(lactic acid) and their application for the antibacterial functionalization of poly(lactic acid) non-woven fabric

Zhen-Zhen Ma and Ren-Cheng Tang

Mater. Res. Express, 2017, 4, 035009
DOI: 10.1088/2053-1591/aa5dd0

TOPRAKLARDA POLİLAKTİK ASİTİN (PLA) BİYOBOZUNMASI

Şeyma Nur ERKUL and Selnur UÇAROĞLU

UUJFE, 2023, 28, 25
DOI: 10.17482/uumfd.1246168

Bio-Based Poly(Butylene succinate-co-dodecylene succinate) Derived from 1,12-Dodecanediol: Synthesis and Characterization

Guoqiang Wang, Xingyu Hao, Yakun Dong and Li Zhang

J Polym Environ, 2023, 31, 4990
DOI: 10.1007/s10924-023-02916-9

Towards the Sustainability of the Plastic Industry through Biopolymers: Properties and Potential Applications to the Textiles World

Antonella Patti and Domenico Acierno

Polymers, 2022, 14, 692
DOI: 10.3390/polym14040692

Lignocellulosic biomass as renewable feedstock for biodegradable and recyclable plastics production: A sustainable approach

Tirath Raj, K. Chandrasekhar, A. Naresh Kumar and Sang-Hyoun Kim

Renewable and Sustainable Energy Reviews, 2022, 158, 112130
DOI: 10.1016/j.rser.2022.112130

Reviewing the manufacturing challenges and scientific debates: Insights into the antibacterial capabilities and potential applications of PLA/ZnO nanocomposites

Bekinew Kitaw Dejene

Journal of Thermoplastic Composite Materials, 2025, 38, 2779
DOI: 10.1177/08927057241292298

Synthesis of a novel superabsorbent with slow-release urea fertilizer using modified cellulose as a grafting agent and flexible copolymer

Zahra Mohammadbagheri, Abbas Rahmati and Parisa Hoshyarmanesh

International Journal of Biological Macromolecules, 2021, 182, 1893
DOI: 10.1016/j.ijbiomac.2021.05.191

Green Processing of Neat Poly(lactic acid) Using Carbon Dioxide under Elevated Pressure for Preparation of Advanced Materials: A Review (2012–2022)

Stoja Milovanovic, Ivana Lukic, Gabrijela Horvat, Zoran Novak, Sulamith Frerich, Marcus Petermann and Carlos A. García-González

Polymers, 2023, 15, 860
DOI: 10.3390/polym15040860

The Hydration Blueprint of Polylactic Acid: Computational Decoding of Noncovalent Interactions for Predictive Biodegradation

Rehin Sulay, Sneha Anna Sunny, S. Bushramol, A. N. Arshana, Abdullah Yahya Abdullah Alzahrani and Renjith Thomas

J Comput Chem, 2026, 47
DOI: 10.1002/jcc.70322

Biomass carbon mining to develop nature-inspired materials for a circular economy

Anna Bachs-Herrera, Daniel York, Tristan Stephens-Jones, Ian Mabbett, Jingjie Yeo and Francisco J. Martin-Martinez

iScience, 2023, 26, 106549
DOI: 10.1016/j.isci.2023.106549

A comprehensive review on polylactic acid (PLA) – Synthesis, processing and application in food packaging

T. Angelin Swetha, Abhispa Bora, K. Mohanrasu, P. Balaji, Rathinam Raja, Kumar Ponnuchamy, Govarthanan Muthusamy and A. Arun

International Journal of Biological Macromolecules, 2023, 234, 123715
DOI: 10.1016/j.ijbiomac.2023.123715

Poly(lactic acid)-Based Electrospun Fibrous Structures for Biomedical Applications

Homa Maleki, Bahareh Azimi, Saeed Ismaeilimoghadam and Serena Danti

Applied Sciences, 2022, 12, 3192
DOI: 10.3390/app12063192

“Development of water-resistant catalysts by surface modification of tin-based solids for the upgrading of biomass derivatives”

Sandra Z. Romero, Pablo J. Luggren and Verónica K. Díez

Surfaces and Interfaces, 2025, 72, 107140
DOI: 10.1016/j.surfin.2025.107140

Electrical and Magnetic Properties of 3D Printed Integrated Conductive Biodegradable Polymer Nanocomposites for Sustainable Electronics Development

Rajveer Mudhar, Andiol Mucolli, Jim Ford, Cristian Lira and Hamed Yazdani Nezhad

J. Compos. Sci., 2022, 6, 345
DOI: 10.3390/jcs6110345

Improvement of flame retardancy of poly(lactic acid) nonwoven fabric with a phosphorus- containing flame retardant

Xian-Wei Cheng, Jin-Ping Guan, Ren-Cheng Tang and Kai-Qiang Liu

Journal of Industrial Textiles, 2016, 46, 914
DOI: 10.1177/1528083715606105

Synthesis and structures of copper(II) complexes containing N,N-bidentate N-substituted phenylethanamine derivatives as pre-catalysts for heterotactic-enriched polylactide

Juhyun Cho, Min Kyung Chun, Saira Nayab and Jong Hwa Jeong

Polyhedron, 2019, 163, 54
DOI: 10.1016/j.poly.2019.02.014

Chemical investigation of barks from broad-leaved tree species using EGA-MS and GC/MS

Erika Ribechini, Filippo Mangani and Maria Perla Colombini

Journal of Analytical and Applied Pyrolysis, 2015, 114, 235
DOI: 10.1016/j.jaap.2015.06.001

Sucrose biosynthesis-related to gene expression in Beta vulgaris L. across different growth period

Woon Ji Kim, Baul Yang, Seung Hyeon Lee, Jae Hoon Kim, Sang Hoon Kim and Jaihyunk Ryu

Bioagro, 2025, 37, 255
DOI: 10.51372/bioagro373.1

Isomerizing Hydroformylation of Cashew Nut Shell Liquid

Swechchha Pandey, Dinesh R. Shinde and Samir H. Chikkali

ChemCatChem, 2017, 9, 3997
DOI: 10.1002/cctc.201700717

Effect of methyl as the simplest C–H side group on the significant variation of physical properties of biodegradable poly(ethylene succinate)

Kangjing Zhang and Zhaobin Qiu

Polymer Testing, 2020, 90, 106755
DOI: 10.1016/j.polymertesting.2020.106755

Determination of phenylphosphonic acid zinc salt in poly(lactic acid) using thermally assisted methylation pyrolysis–gas chromatography/mass spectrometry

Kazuko Matsui, Makoto Niwa, Atsushi Watanabe, Chuichi Watanabe and Norio Teramae

ANAL. SCI., 2025, 41, 1817
DOI: 10.1007/s44211-025-00845-2

Exploiting Nature's Most Abundant Polymers: Developing New Pathways for the Conversion of Cellulose, Hemicellulose, Lignin and Chitin into Platform Molecules (and Beyond)

Martin G. Banwell, Brett Pollard, Xin Liu and Luke A. Connal

Chemistry An Asian Journal, 2021, 16, 604
DOI: 10.1002/asia.202001451

Fractionation for further conversion: from raw corn stover to lactic acid

Ting He, Zhicheng Jiang, Ping Wu, Jian Yi, Jianmei Li and Changwei Hu

Sci Rep, 2016, 6
DOI: 10.1038/srep38623

A novel approach for the synthesis of lactic acid-based polymers in an aqueous dispersed medium

Raissa Gabriela M. Reis Barroso, Sílvia B. Gonçalves and Fabricio Machado

Sustainable Chemistry and Pharmacy, 2020, 15, 100211
DOI: 10.1016/j.scp.2019.100211

Mechanical Properties and Crystallinity of Specific PLA/Cellulose Composites by Surface Modification of Nanofibrillated Cellulose

Hongzhe Chu, Zeyan Chen, Yongli Chen, Deling Wei, Yang Liu and Hui Zhao

Polymers, 2024, 16, 2474
DOI: 10.3390/polym16172474

Poly(lactic acid)-based biocomposites reinforced with modified cellulose nanocrystals

Yuanyuan Yin, Lina Zhao, Xue Jiang, Hongbo Wang and Weidong Gao

Cellulose, 2017, 24, 4773
DOI: 10.1007/s10570-017-1455-y

PLGA with less than 1 month of half-life time: Tensile properties in dry and wet states and hydrolytic degradation

Charlotte Duval, Rachid Rahouadj, Cécile Nouvel and Jean-Luc Six

International Journal of Polymeric Materials and Polymeric Biomaterials, 2018, 67, 509
DOI: 10.1080/00914037.2017.1354197

Formation of micro/nanoparticles and microspheres from polyesters by dispersion ring‐opening polymerization

Pulikanti Guruprasad Reddy and Abraham J. Domb

Polymers for Advanced Techs, 2021, 32, 3835
DOI: 10.1002/pat.5476

Development of a photo-degradable polyester resulting from the homopolymerization of o-hydroxycinnamic acid

Matthew S. Baker, Johann Roque, Kyle S. Burley, Bailey J. Phelps and Charlotte F. Labrie-Cleary

Materials Today Communications, 2022, 31, 103280
DOI: 10.1016/j.mtcomm.2022.103280

Utilizing fungal biodegradation for valorisation of lignocellulosic waste biomass and its diverse applications

Prerna Mehta and Dinesh K. Chelike

Applied Research, 2024, 3
DOI: 10.1002/appl.202300119

Enhanced durability of sustainable poly (lactic acid)-based composites with renewable starch and wood flour

Shanshan Lv, Jiyou Gu, Haiyan Tan and Yanhua Zhang

Journal of Cleaner Production, 2018, 203, 328
DOI: 10.1016/j.jclepro.2018.08.266

Metal-organic frameworks as catalysts for sugar conversion into platform chemicals: State-of-the-art and prospects

Noor Aljammal, Christia Jabbour, Joris W. Thybaut, Kristof Demeestere, Francis Verpoort and Philippe M. Heynderickx

Coordination Chemistry Reviews, 2019, 401, 213064
DOI: 10.1016/j.ccr.2019.213064

Environmental performance of bioplastic packaging on fresh food produce: A consequential life cycle assessment

George Bishop, David Styles and Piet N.L. Lens

Journal of Cleaner Production, 2021, 317, 128377
DOI: 10.1016/j.jclepro.2021.128377

Production of polylactic acid biocomposite reinforced with environmentally friendly cellulose nanofiber derived from steam-treated bamboo

Akihiro Suzuki, Yoshitoshi Nakamura and Chikako Asada

Biomass Conv. Bioref., 2024, 14, 16951
DOI: 10.1007/s13399-023-03856-z

Biodegradable Stone Paper as a Sustainable Alternative to Traditional Paper: A Review

Nupur Swain, Pragti Saini, Sampat Singh Bhati and Vibhore Kumar Rastogi

J Inorg Organomet Polym, 2023, 33, 2240
DOI: 10.1007/s10904-023-02644-6

Tetradentate iminophenolate copper complexes in rac-lactide polymerization

Pargol Daneshmand, Aurélie Randimbiarisolo and Frank Schaper

Can. J. Chem., 2019, 97, 131
DOI: 10.1139/cjc-2018-0287

Synergistic effect of adding bioglass and carbon nanotubes on poly (lactic acid) porous membranes for guided bone regeneration

Nayara Koba de Moura, Eduardo Ferreira Martins, Rodrigo Luiz Moraes Saldanha Oliveira, Idália Aparecida Waltrick de Brito Siqueira, João Paulo Barros Machado, Elisa Esposito, Suelen Simões Amaral, Luana Marotta Reis de Vasconcellos, Fabio Roberto Passador and Eliandra de Sousa Trichês

Materials Science and Engineering: C, 2020, 117, 111327
DOI: 10.1016/j.msec.2020.111327

A new class of nucleating agents for poly(L-lactic acid): Environmentally-friendly metal salts with biomass-derived ligands and advanced nucleation ability

Yi Cheng, Ziyue Jiao, Mingjun Li, Mingze Xia, Zhifeng Zhou, Ping Song, Qiang Xu and Zhiyong Wei

International Journal of Biological Macromolecules, 2023, 225, 1599
DOI: 10.1016/j.ijbiomac.2022.11.216

Dual effects of a diamide derivative as nucleator on crystallization kinetics and aggregated structure of biodegradable Poly(ethylene succinate)

Ziyu Wei, Shanshan Zhou, Yuhong Xie, Yongyan Sun, Huimin Ma, Zhanghua Xie, Zhe Zhu and Jinjun Yang

Polymer Testing, 2021, 94, 107022
DOI: 10.1016/j.polymertesting.2020.107022

Identification of Known and Novel Monomers for Poly(hydroxyurethanes) from Biobased Materials

Guanhua Wang, Lauren Lopez, Matthew Coile, Yixuan Chen, John M. Torkelson and Linda J. Broadbelt

Ind. Eng. Chem. Res., 2021, 60, 6814
DOI: 10.1021/acs.iecr.0c06351

Highly Regioselective Isomerizing Hydroformylation of Long‐Chain Internal Olefins Catalyzed by a Rhodium Bis(Phosphite) Complex

Swechchha Pandey and Samir H. Chikkali

ChemCatChem, 2015, 7, 3468
DOI: 10.1002/cctc.201500743

Bio-based poly(decylene terephthalate-co-decylene furandicarboxylate)s derived from 2,5-furandicarboxylic acid (FDCA): Synthesis and properties

Guoqiang Wang, Yakun Dong, Xingyu Hao, Li Zhang and Xiang Chi

Reactive and Functional Polymers, 2022, 181, 105446
DOI: 10.1016/j.reactfunctpolym.2022.105446

Biodegradable polymers for membrane separation

Samaneh Bandehali, Hamidreza Sanaeepur, Abtin Ebadi Amooghin, Saeed Shirazian and Seeram Ramakrishna

Separation and Purification Technology, 2021, 269, 118731
DOI: 10.1016/j.seppur.2021.118731

Bioresorbable polylactic acid (PLA) and bioactive glasses (BG) composite: Influence of gold coated of BG powder on mechanical properties and chemical reactivity

Louis Chaigneau, Aurelien Perrot, Damien Brezulier, Jean-Francois Coulon, Francois Chevire and Ronan Lebullenger

Journal of the Mechanical Behavior of Biomedical Materials, 2023, 138, 105571
DOI: 10.1016/j.jmbbm.2022.105571

A Redox-Neutral, Two-Enzyme Cascade for the Production of Malate and Gluconate from Pyruvate and Glucose

Ravneet Mandair, Pinar Karagoz and Roslyn M. Bill

Applied Sciences, 2021, 11, 4877
DOI: 10.3390/app11114877

Fabrication of Polymer/Graphene Biocomposites for Tissue Engineering

João Meneses, Tom van de Kemp, Raquel Costa-Almeida, Rúben Pereira, Fernão D. Magalhães, Miguel Castilho and Artur M. Pinto

Polymers, 2022, 14, 1038
DOI: 10.3390/polym14051038

Biomaterials for organically generated habitats beyond Earth

Robin Wordsworth, Rafid Quayum, Elida Kocharian, Ann Pearson, Xavier Portillo, Madeleine Yang, Charles S. Cockell, Shannon Nangle and George Church

Sci. Adv., 2025, 11
DOI: 10.1126/sciadv.adp4985

Catalytic transformations of cellulose and cellulose-derived carbohydrates into organic acids

Weiping Deng, Qinghong Zhang and Ye Wang

Catalysis Today, 2014, 234, 31
DOI: 10.1016/j.cattod.2013.12.041

Structure-controlled lignin complex for PLA composites with outstanding antibacterial, fluorescent and photothermal conversion properties

Yongqin Wang, Jie Hou, Yangze Huang and Yu Fu

International Journal of Biological Macromolecules, 2022, 194, 1002
DOI: 10.1016/j.ijbiomac.2021.11.159

An overview of green and sustainable polymeric coatings

Maryam Jouyandeh, Farzad Seidi, Sajjad Habibzadeh, Mohamed S Hasanin, Paulina Wiśniewska, Navid Rabiee, Henri Vahabi, Seeram Ramakrishna and Mohammad Reza Saeb

Surface Innovations, 2024, 12, 268
DOI: 10.1680/jsuin.23.00043

Chemical strategies towards controlled release in agriculture

Evelien Vermoesen, Samuel Bodé, Geert Brosens, Pascal Boeckx and Sandra Van Vlierberghe

Reviews in Chemical Engineering, 2024, 40, 247
DOI: 10.1515/revce-2022-0057

Metagenomic mining of Indian river confluence reveal functional microbial community with lignocelluloytic potential

Vinay Rajput, Rachel Samson, Rakeshkumar Yadav, Syed Dastager, Krishna Khairnar and Mahesh Dharne

3 Biotech, 2022, 12
DOI: 10.1007/s13205-022-03190-7

Potential Use of Cow Manure for Poly(Lactic Acid) Production

Ricard Garrido, Luisa F. Cabeza, Víctor Falguera and Omar Pérez Navarro

Sustainability, 2022, 14, 16753
DOI: 10.3390/su142416753

Isotactic rac‐Lactide Polymerization with Copper Complexes: The Influence of Complex Nuclearity

Solène Fortun, Pargol Daneshmand and Frank Schaper

Angewandte Chemie, 2015, 127, 13873
DOI: 10.1002/ange.201505674

Graphene-based nano-functional materials for surface modification of wheat straw to enhance the performance of bio-based polylactic acid composites

M. Chougan, S.H. Ghaffar and M.J. Al-Kheetan

Materials Today Sustainability, 2023, 21, 100308
DOI: 10.1016/j.mtsust.2022.100308

Isotactic rac‐Lactide Polymerization with Copper Complexes: The Influence of Complex Nuclearity

Solène Fortun, Pargol Daneshmand and Frank Schaper

Angew Chem Int Ed, 2015, 54, 13669
DOI: 10.1002/anie.201505674

Catalytic-Site-Mediated Chain-End Control in the Polymerization of rac-Lactide with Copper Iminopyrrolide Complexes

Pargol Daneshmand, José L. Jiménez-Santiago, Maxime Aragon--Alberti and Frank Schaper

Organometallics, 2018, 37, 1751
DOI: 10.1021/acs.organomet.8b00196

Bioplastic Fibres: Processing, Properties, Applications and Challenges

Shazed Aziz, Pejman Heidarian, Vincent Mathel, Tony McNally, Ton Peijs, Ashok Kumar Nanjundan, Russell J. Varley, Peter J. Halley and Luigi-Jules Vandi

Adv. Fiber Mater., 2026, 8, 468
DOI: 10.1007/s42765-025-00647-1

Characterization of accelerated hydrolysis degradation of poly (lactic acid) in phosphate buffered saline solution

Soo-Hyun Woo and Jung-Wook Wee

Polymer Degradation and Stability, 2024, 223, 110726
DOI: 10.1016/j.polymdegradstab.2024.110726

Interface compatibility and mechanisms of improved mechanical performance of starch/poly(lactic acid) blend reinforced by bamboo shoot shell fibers

Mingjie Guan, Zhiwei Zhang, Cheng Yong and Keke Du

J of Applied Polymer Sci, 2019, 136
DOI: 10.1002/app.47899

Bioplastic derived from corn stover: Life cycle assessment and artificial intelligence-based analysis of uncertainty and variability

Junwei Li, Yinqiao Wang, Chuan Xu, Sipan Liu, Jiayi Dai and Kai Lan

Science of The Total Environment, 2024, 946, 174349
DOI: 10.1016/j.scitotenv.2024.174349

Polylactic acid in the fabrication of separation membranes: A review

Vahid Vatanpour, Ahmad Dehqan, Shadi Paziresh, Sirus Zinadini, Ali Akbar Zinatizadeh and Ismail Koyuncu

Separation and Purification Technology, 2022, 296, 121433
DOI: 10.1016/j.seppur.2022.121433

Synthesis of Poly(Lactic Acid) from Ammonium Lactate Fermentation Broth of Food Waste

Bingxin Zhang, Yan Guo, Ming Gao, Chuanfu Wu, Xiaona Wang, Xiaohong Sun and Qunhui Wang

Waste Biomass Valor, 2024, 15, 4013
DOI: 10.1007/s12649-024-02422-6

Micro-/Nano-Structured Biodegradable Pressure Sensors for Biomedical Applications

Yoo-Kyum Shin, Yujin Shin, Jung Woo Lee and Min-Ho Seo

Biosensors, 2022, 12, 952
DOI: 10.3390/bios12110952

Diiminopyrrolide Copper Complexes: Synthesis, Structures, and rac-Lactide Polymerization Activity

Pargol Daneshmand, Solène Fortun and Frank Schaper

Organometallics, 2017, 36, 3860
DOI: 10.1021/acs.organomet.7b00609

Bimetallic Aluminum 5,6-Dihydro-7,7-dimethyl quinolin-8-olates as Pro-Initiators for the ROP of ε-CL; Probing the Nuclearity of the Active Initiator

Qiurui Zhang, Wenjuan Zhang, Gregory Solan, Tongling Liang and Wen-Hua Sun

Polymers, 2018, 10, 764
DOI: 10.3390/polym10070764

Thermal behavior, mechanical and rheological properties, and hydrolytic degradation of novel branched biodegradable poly(ethylene succinate) copolymers

Shoutian Qiu, Kangjing Zhang, Zhiqiang Su and Zhaobin Qiu

Polymer Testing, 2018, 66, 64
DOI: 10.1016/j.polymertesting.2018.01.008

Enhancing the durability of poly(lactic acid) composites by nucleated modification

Ce Sun, Changxin Li, Haiyan Tan and Yanhua Zhang

Polymer International, 2019, 68, 1450
DOI: 10.1002/pi.5837

Advanced Bioresin Formulation for 3D-Printed Bone Scaffolds: PCLDMA and p-PLA Integration

Deniz Sakarya, Tolga Zorlu, Sevil Yücel, Yesim Muge Sahin and Ali Can Özarslan

Polymers, 2024, 16, 534
DOI: 10.3390/polym16040534

Biodegradation and Non-Enzymatic Hydrolysis of Poly(Lactic-co-Glycolic Acid) (PLGA12/88 and PLGA6/94)

Yue Wang, Maria A. Murcia Valderrama, Robert-Jan van Putten, Charlie J. E. Davey, Albert Tietema, John R. Parsons, Bing Wang and Gert-Jan M. Gruter

Polymers, 2021, 14, 15
DOI: 10.3390/polym14010015

Compositional Influence on the Morphology and Thermal Properties of Woven Non-Woven Mats of PLA/OLA/MgO Electrospun Fibers

Adrián Leonés, Laura Peponi, Jesús-María García-Martínez and Emilia P. Collar

Polymers, 2022, 14, 2092
DOI: 10.3390/polym14102092

Review on Spinning of Biopolymer Fibers from Starch

Selamu Temesgen, Mirko Rennert, Tamrat Tesfaye and Michael Nase

Polymers, 2021, 13, 1121
DOI: 10.3390/polym13071121

An optimisation-based framework for the conceptual design of reaction-separation processes

Qingyuan Kong and Nilay Shah

Chemical Engineering Research and Design, 2016, 113, 206
DOI: 10.1016/j.cherd.2016.07.021

Bio-Based Packaging: Materials, Modifications, Industrial Applications and Sustainability

Corina L. Reichert, Elodie Bugnicourt, Maria-Beatrice Coltelli, Patrizia Cinelli, Andrea Lazzeri, Ilaria Canesi, Francesca Braca, Belén Monje Martínez, Rafael Alonso, Lodovico Agostinis, Steven Verstichel, Lasse Six, Steven De Mets, Elena Cantos Gómez, Constance Ißbrücker, Ruben Geerinck, David F. Nettleton, Inmaculada Campos, Erik Sauter, Pascal Pieczyk and Markus Schmid

Polymers, 2020, 12, 1558
DOI: 10.3390/polym12071558

Influence of ceramic phosphate powders on the physicochemical and biological properties of poly(l-lactide)

Patrycja Szczepanska, Hieronim Szymanowski, Malgorzata Suwalska, Karolina Rosinska, Marcin Skrodzki, Pawel Uznanski, Dorota Bociaga, Irena Bubko, Ewa Drozd, Beata Gruber-Bzura, Jaroslaw Michal Deszczynski and Anna Sobczyk-Guzenda

Ceramics International, 2023, 49, 7692
DOI: 10.1016/j.ceramint.2022.10.263

Picking Up the Optimum Triggering Combinations of Crashworthy 3D-Printed Sustainable Structures: An Experimental Study in Al-Kharj Governorate, KSA

Mahmoud M. Awd Allah, Mahmoud F. Abd El-Halim, Mohamed Ibrahim Abd El Aal and Marwa A. Abd El-baky

Fibers Polym, 2024, 25, 3911
DOI: 10.1007/s12221-024-00688-0

Halloysite nanotubes (HNT) as reinforcement for compatibilized blends of polypropylene (PP) and polylactic acid (PLA)

Krishna Prasad Rajan, Aravinthan Gopanna, Emad A. M. Abdelghani and Selvin P. Thomas

J Polym Res, 2021, 28
DOI: 10.1007/s10965-021-02738-0

Lactic Acid Production from Cow Manure: Experimental Process Conditions Analysis

Ricard Garrido, Víctor Falguera, Omar Pérez Navarro, Amanda Acosta Solares and Luisa F. Cabeza

Fermentation, 2023, 9, 604
DOI: 10.3390/fermentation9070604

In vitro temperature-dependent degradation of polylactic acid: Experimental characterization and neural network-based prediction

Soo-Hyun Woo, Na-Im Kim and Jung-Wook Wee

Polymer Degradation and Stability, 2025, 240, 111497
DOI: 10.1016/j.polymdegradstab.2025.111497

Comparison study of fuel characteristics of slow pyrolyzed chars with Neyveli lignite

Prakash Parthasarathy and K. N. Sheeba

Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 2018, 40, 523
DOI: 10.1080/15567036.2016.1219793

Integrated biorefinery approaches for the industrialization of cellulosic ethanol fuel

Jie Qiao, Haiyang Cui, Minghui Wang, Xianshen Fu, Xinyue Wang, Xiujuan Li and He Huang

Bioresource Technology, 2022, 360, 127516
DOI: 10.1016/j.biortech.2022.127516

Biological and Physicochemical Characterization of Biodegradable Aliphatic Polyesters with Copper Deposited by Magnetron Sputtering

Malgorzata Latos-Brozio, Aleksandra Drzazga, Anna Masek, Zdzisława Mrozińska and Marcin H. Kudzin

Materials, 2025, 19, 57
DOI: 10.3390/ma19010057

Can 3D-Printed Bioactive Glasses Be the Future of Bone Tissue Engineering?

Amey Dukle, Dhanashree Murugan, Arputharaj Nathanael, Loganathan Rangasamy and Tae-Hwan Oh

Polymers, 2022, 14, 1627
DOI: 10.3390/polym14081627

Lignocellulosic biomass: Hurdles and challenges in its valorization

Mamata S. Singhvi and Digambar V. Gokhale

Appl Microbiol Biotechnol, 2019, 103, 9305
DOI: 10.1007/s00253-019-10212-7

A concise update on major poly-lactic acid bioprocessing barriers

Priscilla Zwiercheczewski de Oliveira, Luciana Porto de Souza Vandenberghe, Ariane Fátima Murawski de Mello and Carlos Ricardo Soccol

Bioresource Technology Reports, 2022, 18, 101094
DOI: 10.1016/j.biteb.2022.101094

Bio-Sourced and Biodegradable Membranes

Masoume Ehsani, Denis Kalugin, Huu Doan, Ali Lohi and Amira Abdelrasoul

Applied Sciences, 2022, 12, 12837
DOI: 10.3390/app122412837

LPMOs in cellulase mixtures affect fermentation strategies for lactic acid production from lignocellulosic biomass

Gerdt Müller, Dayanand Chandrahas Kalyani and Svein Jarle Horn

Biotech & Bioengineering, 2017, 114, 552
DOI: 10.1002/bit.26091

Improvement of surface hydrophilicity, water uptake, biodegradability, and cytocompatibility through the incorporation of chitosan oligosaccharide into poly(l‐lactide)

Xuehong Wang, Jie Wei, Jianding Chen and Songchao Tang

J of Applied Polymer Sci, 2018, 135
DOI: 10.1002/app.45724

The future of polylactic acid: Enzymatic, chemoenzymatic, and microbial biotransformations for sustainable biopolymer production

J. López-Fernández, M. D. Benaiges and F. Valero

Biocatalysis and Biotransformation, 2026, 1
DOI: 10.1080/10242422.2026.2643703

Biomass composite based on metallized bamboo fiber for electromagnetic interference shielding, joule heating, and solar heating

Qi Zhang, Ke Wang, Xianchun Chen, Xiaohong Tang, Qian Zhao and Qiang Fu

Composites Science and Technology, 2023, 243, 110228
DOI: 10.1016/j.compscitech.2023.110228

The immobilization of a cyclo-trimer of acetonitrile onto poly (lactic acid) (PLA) surface: Improvement of attachment and differentiation of osteoblast-like cells

Xujie Liu, Hua Zhou, Jiapeng Dong, Zhenzhen Feng, Ying Bao and Yan He

Materials Letters, 2024, 367, 136614
DOI: 10.1016/j.matlet.2024.136614

Purification of lactide by deep eutectic solvent assisted phase-change extraction technology

Jiaming Yu, Xuanfeng Xia, Chuang Lei, Jianluo Zhu and Yanling Yu

Separation and Purification Technology, 2025, 372, 133421
DOI: 10.1016/j.seppur.2025.133421

Biopolymeric composite materials for environmental applications

Anil Kumar Moola, Muhil Raj Prabhakar, Baishali Dey, Balasubramanian Paramasivan, Sita Manojgyna Vangala, Ramya Jakkampudi and Selvam Sathish

Physical Sciences Reviews, 2024, 9, 2153
DOI: 10.1515/psr-2022-0223

Hydrolytic degradation studies of bio-composites of poly(L-lactic acid)/Oligo(L-lactic acid) grafted and non-grafted microcrystalline cellulose

Md. Hafezur Rahaman, Abu Rayhan, G.M. Arifuzzaman Khan, Md. Ashraful Alam, S.M. Nur Alam, Md. Tauhidul Islam and Md. Aminur Rahman

Next Materials, 2025, 8, 100615
DOI: 10.1016/j.nxmate.2025.100615

Polylactic acid blends: an insight to their microbial production, biodegradation and applications

Mukesh Kumar Patidar, Kanushri Ranawat, Fatema Matkawala, Shashwat Nigam and Apurba K. Das

Environmental Sustainability, 2024, 7, 439
DOI: 10.1007/s42398-024-00333-9

Cross‐metathesis of biorenewable dioxalates and diols to film‐forming degradable polyoxalates

Bhausaheb S. Rajput, Farsa Ram, Shamal K. Menon, Kadhiravan Shanmuganathan and Samir H. Chikkali

J. Polym. Sci. Part A: Polym. Chem., 2018, 56, 1584
DOI: 10.1002/pola.29043

Polylactic acid: synthesis and biomedical applications

M.S. Singhvi, S.S. Zinjarde and D.V. Gokhale

J Appl Microbiol, 2019, 127, 1612
DOI: 10.1111/jam.14290

Photo-oxidative resistance and adjustable degradation of poly-lactic acid (PLA) obtained by biomass addition and interfacial construction

Wei Wang, Guangchao Ye, Dapeng Fan, Yang Lu, Peng Shi, Xiang Wang and Buhe Bateer

Polymer Degradation and Stability, 2021, 194, 109762
DOI: 10.1016/j.polymdegradstab.2021.109762

3D-printed polylactic acid scaffolds for bone tissue engineering: Bioactivity enhancing strategies based on composite filaments and coatings

Amey Dukle and M. Ravi Sankar

Materials Today Communications, 2024, 40, 109776
DOI: 10.1016/j.mtcomm.2024.109776

Isothermal and nonisothermal crystallization kinetics of novel biobased poly(ethylene succinate-co-ethylene sebacate) copolymers from the amorphous state

Shoutian Qiu, Zhiqiang Su and Zhaobin Qiu

J Therm Anal Calorim, 2017, 129, 801
DOI: 10.1007/s10973-017-6234-3

Bacillus pumilus B12 Degrades Polylactic Acid and Degradation Is Affected by Changing Nutrient Conditions

Kyle S. Bonifer, Xianfang Wen, Sahar Hasim, Elise K. Phillips, Rachel N. Dunlap, Eric R. Gann, Jennifer M. DeBruyn and Todd B. Reynolds

Front. Microbiol., 2019, 10
DOI: 10.3389/fmicb.2019.02548

Biocompatible linear diamides derivative-nucleated biodegradable poly(ethylene succinate): Tailored crystallization kinetics, aggregated structure and thermal degradation

Shanshan Zhou, Ziyu Wei, Yongyan Sun, Zhe Zhu, Zhanghua Xie, Huimin Ma, Jing Yin, Junsheng Wang and Jinjun Yang

Polymer Degradation and Stability, 2021, 183, 109428
DOI: 10.1016/j.polymdegradstab.2020.109428

Techno‐Economic Analysis of Polylactic Acid from Corn Stover: Understanding Uncertainty and Variability via Artificial Intelligence Tools

Yinqiao Wang, Jiawei Huang, Chuan Xu, Sipan Liu, Junwei Li and Kai Lan

Advanced Sustainable Systems, 2026, 10
DOI: 10.1002/adsu.202500865

A review on poly lactic acid (PLA) as a biodegradable polymer

Nur-Azzah Afifah Binti Taib, Md Rezaur Rahman, Durul Huda, Kuok King Kuok, Sinin Hamdan, Muhammad Khusairy Bin Bakri, Muhammad Rafiq Mirza Bin Julaihi and Afrasyab Khan

Polym. Bull., 2023, 80, 1179
DOI: 10.1007/s00289-022-04160-y

Sustainability and life cycle assessments of lignocellulosic and algal pretreatments

Sharrel Rebello, A.N. Anoopkumar, Embalil Mathachan Aneesh, Raveendran Sindhu, Parameswaran Binod and Ashok Pandey

Bioresource Technology, 2020, 301, 122678
DOI: 10.1016/j.biortech.2019.122678

Recent Advancements in the Life Cycle Analysis of Lignocellulosic Biomass

Muhammad Bilal and Hafiz M. N. Iqbal

Curr Sustainable Renewable Energy Rep, 2020, 7, 100
DOI: 10.1007/s40518-020-00153-5

Biodegradable Plastics as Sustainable Alternatives: Advances, Basics, Challenges, and Directions for the Future

Eunbin Hwang, Yung-Hun Yang, Jiho Choi, See-Hyoung Park, Kyungmoon Park and Jongbok Lee

Materials, 2025, 18, 4247
DOI: 10.3390/ma18184247

Melt Compounding of Poly(lactic acid)‐Based Composites: Blending Strategies, Process Conditions, and Mechanical Properties

Yiwen Tao, Yue Zhang, Tao Xia and Ning Lin

Macromol. Rapid Commun., 2024, 45
DOI: 10.1002/marc.202400380