Cross Reference Logo
Citations to this article as recorded by CrossRef and RSC Journals (66 citations).

Light-based 3D printing and post-treatments of moulds for PDMS soft lithography
Bastien Venzac
Lab Chip, 2025, 25, 2129
DOI: 10.1039/D4LC00836G

3D printing of droplet microfluidic devices: principles, wetting control, scale-up, and beyond
Je Hyun Lee, Taesoo Jang, Soeun Park, Su-Bin Shin, Jaemoon Lee, Yoon-Ho Hwang and Hyomin Lee
Lab Chip, 2026, 26, 1219
DOI: 10.1039/D5LC01011J

Fabrication of a bioreactor combining soft lithography and vat photopolymerisation to study tissues and multicellular organisms under dynamic culture conditions
Thomas Meynard, Félix Royer, Robin Houssier, Orégane Bajeux, Sonia Paget, Fatima Lahdaoui, Alejandra Mogrovejo Valdivia, Nathalie Maubon, Jérôme Vicogne, Isabelle Van Seuningen and Vincent Senez
Lab Chip, 2025, 25, 4119
DOI: 10.1039/D5LC00172B

Gut-on-chip methodology based on 3D-printed molds: a cost-effective and accessible approach
Elise Delannoy, Aurélie Burette, Sébastien Janel, Sabine Poiret, Nathalie Deboosere, Catherine Daniel and Alexandre Grassart
Lab Chip, 2025, 25, 4396
DOI: 10.1039/D5LC00147A

Digital light processing (DLP) 3D printing of polymer networks comprising virus-like particles
Naroa Sadaba, Jorge Leganés Bayón, Alshakim Nelson and Nicole F. Steinmetz
Chem. Commun., 2024, 60, 9733
DOI: 10.1039/D4CC02411G

3D nanoprinting of PDMS microvessels with tailored tortuosity and microporosity via direct laser writing
Xin Xu, Yunxiu Qiu, Chen-Yu Chen, Molly Carton, Paige M. R. Campbell, A. Muhaymin Chowdhury, Bidhan C. Bandyopadhyay, William E. Bentley, Bryan Ronain Smith and Ryan D. Sochol
Lab Chip, 2025, 25, 1947
DOI: 10.1039/D4LC01051E

3D printed microfluidic devices with electrodes for electrochemical analysis
Major A. Selemani, Khamhbawihum Cenhrang, Samuel Azibere, Mariama Singhateh and R. Scott Martin
Anal. Methods, 2024, 16, 6941
DOI: 10.1039/D4AY01701C

3D-printed micro-pore evaporator for increasing concentration of analytes in aqueous solutions
Yufeng Su and Tanya Hutter
Lab Chip, 2025, 25, 3141
DOI: 10.1039/D5LC00329F

Smart microdevices for biomedical drug delivery: endogenous stimuli as the key to safer therapeutics
Deepanjan Datta, Viola Colaco, Maria Nison, Ananya Prabha H, Sony Priyanka Bandi, Namdev Dhas, Vasudev R Pai, Praveen Halagali, Vamshi Krishna Tippavajhala, Sudarshan Singh and Lalitkumar K. Vora
RSC Adv., 2026, 16, 14878
DOI: 10.1039/D5RA09767C

Enhancing microscale printing accuracy in LCD-based 3D printing using an immobilized release film
Chang Tian, Chaojie Shao, Tiantian Li, Wenya Tang, Peiqi Wu, Qian Xu, Wei Li and Fen Zhang
Lab Chip, 2025, 25, 4013
DOI: 10.1039/D5LC00452G

3D‐Printed Unibody Microfluidic Devices for Organ‐on‐Chip Applications
Louis Jun Ye Ong, Surasak Kasetsirikul, Laura A. Milton, Xiaolei Nie, Andrea W. Eiken, James Chirnside, Lucy‐May Gillian Young, Gregory P. Nordin and Yi‐Chin Toh
Adv Materials Technologies, 2025, 10
DOI: 10.1002/admt.202501056

Engineering Biomaterial Scaffolds for Melanoma: Innovations in 3D Printing and Nanoparticle–Hydrogel Scaffolds for Enhanced Drug Delivery
H. S. Praveen, N. Ragavendra Naveen and Prakash Goudanavar
Biomedical Materials & Devices, 2025
DOI: 10.1007/s44174-025-00394-2

Model-based design of a microfluidic pervaporation device for intensified VOC separation
Helena Potočnik, Yannick Šmigoc, Igor Plazl, Polona Žnidaršič Plazl and Rok Ambrožič
Separation and Purification Technology, 2025, 378, 134795
DOI: 10.1016/j.seppur.2025.134795

Organ-on-a-Chip and Lab-on-a-Chip Technologies in Cardiac Tissue Engineering
Daniele Marazzi, Federica Trovalusci, Paolo Di Nardo and Felicia Carotenuto
Biomimetics, 2025, 11, 18
DOI: 10.3390/biomimetics11010018

Development of 3D printed microchips with encapsulated channels as miniaturized separation devices for bioanalysis
Christopher T. Desire, R. Dario Arrua, Billy Michalatos, Jing Zhang, Xanthe L. Venn, Michael Breadmore, Zlatko Kopecki, Neil McMillan, Robert Fitridge, Emily F. Hilder and Allison J. Cowin
Analytica Chimica Acta, 2026, 1384, 344971
DOI: 10.1016/j.aca.2025.344971

A review of microfluidic technology for CO2 sequestration in saline aquifers
Yiyan Zhong, Qi Li, Wenbin Gao, Yiping Wen and Yao Zhang
Journal of Rock Mechanics and Geotechnical Engineering, 2026, 18, 810
DOI: 10.1016/j.jrmge.2025.01.018

Paper discs in a 3D printed microplate hybrid microfluidic device for low-cost, rapid, and ultrasensitive paper-based bioluminescence detection of human epidermal growth factor receptor 2 (HER2) breast cancer biomarker
Ahmed A. Shalaby, Asmaa Salah, Akihiko Ishida, Masatoshi Maeki and Manabu Tokeshi
Biosensors and Bioelectronics: X, 2025, 24, 100621
DOI: 10.1016/j.biosx.2025.100621

Recent Advances in Microfluidic Chip Technology for Laboratory Medicine: Innovations and Artificial Intelligence Integration
Hong Cai, Dongxia Wang, Yiqun Zhao and Chunhui Yang
Biosensors, 2026, 16, 104
DOI: 10.3390/bios16020104

Machine learning, response surface method, microscopic analysis, and optimization for mechanical properties of electrically conductive polymer composite fabricated via additive manufacturing
Imran Khan, Ans Al Rashid and Muammer Koç
Oxford Open Materials Science, 2026, 6
DOI: 10.1093/oxfmat/itag004

Impact of Interface Flexibility on Separation Force in Liquid Crystal Display Vat Photopolymerization: A Comprehensive Analysis
Sandeep Kumar Paral, Jeng-Ywan Jeng, Yih-Lin Cheng and Ding-Zheng Lin
ACS Appl. Polym. Mater., 2025, 7, 5898
DOI: 10.1021/acsapm.5c00167

From Soft Lithography to 3D Printing: Current Status and Future of Microfluidic Device Fabrication
Jingjing Xu, Michael Harasek and Margit Gföhler
Polymers, 2025, 17, 455
DOI: 10.3390/polym17040455

Photoresist‐Assisted 3D Printing for Rapid Fabricating Circular Microchannel
Xiaoshi Han, Hui Chang, Yingze Wangguan, Chengji Song, Dongqing Li and Yongxin Song
Adv Materials Technologies, 2025, 10
DOI: 10.1002/admt.202500225

Recent advances in three-dimensional (3D) printing of molecularly imprinted polymers (MIPs) for potential environmental applications
Hamada B. Hawash
Trends in Environmental Analytical Chemistry, 2025, 47, e00274
DOI: 10.1016/j.teac.2025.e00274

Breaking the 100 µm Barrier: Sub‐10 µm 3D Microfluidic Channels via Low‐Cost Maskless Photolithography
Xinghao Chen, Xinjian Xie, Guangrui Ju, Wencai Liu, Zhiyin Wang, Shengwei Feng, Yuanzhi Zhu, Feng Li and Wenqian Feng
Small, 2025, 21
DOI: 10.1002/smll.202508809

Progress in Contactless 3D Printing and 2D Material Integration for Next‐Generation Electrochemical Sensing Applications
Arshid Numan, Lijie Li, Salem AlFaify, Muhammad Sheraz Ahmad, Syam Krishnan and Mohammad Khalid
EcoMat, 2025, 7
DOI: 10.1002/eom2.70031

FLIP: Transforming Consumer Projectors into Maskless Microscale Photopatterning Tools via Fresnel Lens Integration
Sridaran Rajagopal, Sofia Arshavsky‐Graham and Govind Kaigala
Adv Materials Technologies, 2026, 11
DOI: 10.1002/admt.202501123

Recent advances in liquid-free ionic conductive elastomers based on polymerizable deep eutectic solvents: Preparations, properties and applications
Zhumin Yu, Yanbo Zhao, Kai Zhao, Tao Zhou and Changqing Ye
Chemical Engineering Journal, 2024, 499, 156113
DOI: 10.1016/j.cej.2024.156113

Study on the reinforcement mechanism of LCD photopolymerization 3D-printed triply periodic minimal surface structures doped with carbon fiber and hydroxyapatite
Tianyu Gao, Hui Yan, Kehai Long, Wenjun Xu, Hao Wang, Xinyuan Long, Yifan Li and Zheng Qin
Polymer Testing, 2026, 156, 109134
DOI: 10.1016/j.polymertesting.2026.109134

Advancing microneedle technology for multiple distinct target organs drug delivery through 3D printing: a comprehensive review
Tong Huo, Liping Zhou, Xiaochun Bian and Yongqiang Wen
Adv Compos Hybrid Mater, 2025, 8
DOI: 10.1007/s42114-025-01336-8

Requirements and Evaluation of Commercial Digital Light Processing 3D Printers for Upscaled Production of Microstructured Tissue Culture Devices
Zoltán András Guller, Freja Høier, Rujing Zhang, Sandra Wilson and Niels B. Larsen
Adv Eng Mater, 2025, 27
DOI: 10.1002/adem.202501211

Multiscale 2PP and LCD 3D Printing for High-Resolution Membrane-Integrated Microfluidic Chips
Julia K. Hoskins, Patrick M. Pysz, Julie A. Stenken and Min Zou
Nanomanufacturing, 2025, 5, 11
DOI: 10.3390/nanomanufacturing5030011

High-Resolution DLP 3D Printing for Complex Curved and Thin-Walled Structures at Practical Scale: Archimedes Microscrew
Chih-Lang Lin, Jun-Ting Liu and Chow-Shing Shin
Micromachines, 2025, 16, 762
DOI: 10.3390/mi16070762

Modular optofluidic platform based on femtosecond-laser-written interferometers and PDMS microchannels
Luis A. Tapia-Licona, Gloria V. Vázquez, Erika Rodríguez-Sevilla, Rebeca Martínez Vázquez, Rigoberto Castro-Beltrán and Jonathan U. Álvarez-Martínez
Optics and Lasers in Engineering, 2026, 201, 109707
DOI: 10.1016/j.optlaseng.2026.109707

Improving Edge Quality of Liquid Crystal Display 3D Printing Using Local Dimming Method
Xing-Rui Ding, Zi-Hao Deng, Jia-Sheng Li, Rui-Xiang Qian, Bo-Wen Duan and Zong-Tao Li
IEEE Photonics J., 2025, 17, 1
DOI: 10.1109/JPHOT.2025.3527537

Model Design and Path Optimization of Perfusable Chips in Extrusion-Based Bioprinting: Linking Hydrogel Rheology with Structural Features
Jiahao Wu, Zhitong Li, Weilin Meng, Haobin Zheng, Fan Jiang, Mingjun Chen and Chunya Wu
ACS Biomater. Sci. Eng., 2026, 12, 1297
DOI: 10.1021/acsbiomaterials.5c01878

Thin-film DLP 3D printing of multi-material parts with closed-cell internal voids
Binzhi Sun, Nicholas S. Diaco, Xiangjia Chen, Chengkai Dai, A. John Hart, Charlie C. L. Wang, Guoxin Fang and Yeung Yam
npj Adv. Manuf., 2026, 3
DOI: 10.1038/s44334-026-00076-x

Mushroom-reentrant cavity microstructures with nanoparticle decoration for enhanced superhydrophobicity
Mengmeng Li, Yufeng Mu, Wenjuan Li, Kaiyu Zhang, Zuoli Fu, Yuxiang Huang, Haiyan Zhang and Jiang Li
Applied Surface Science, 2026, 736, 166815
DOI: 10.1016/j.apsusc.2026.166815

Advancing diagnostics and disease modeling: current concepts in biofabrication of soft microfluidic systems
César R. Casanova, Marta R. Casanova, Rui L. Reis and Joaquim M. Oliveira
In vitro models, 2024, 3, 139
DOI: 10.1007/s44164-024-00072-5

Dimension compensation of printed master molds by a desktop LCD 3D printer for high-precision microfluidic applications
Xinjie Zhang, Yuyang Liu, Yang Bao, Zixiao Zheng, Jian Mi, Yuxin Tang, Qiwen Zhang and Ayobami Elisha Oseyemi
Microchim Acta, 2024, 191
DOI: 10.1007/s00604-024-06654-0

Scanning‐Laser‐Based Microstereolithography of Microfluidic Chips with Micron Resolution
Christof Rein, Keynaz Kamranikia, Raymonde Council, Pegah Pezeshkpour, Frederik Kotz‐Helmer and Bastian E. Rapp
Adv Materials Technologies, 2024, 9
DOI: 10.1002/admt.202400047

Recent Advances in Microfluidic Platforms for C. Elegans Phenotyping: Comprehensive Review of Imaging Technologies and AI-Driven Analysis
Junhyeon Jeon, Huisoo Jang, Hyunil Ryu, Tae-Joon Jeon and Sun Min Kim
BioChip J, 2026, 20, 24
DOI: 10.1007/s13206-025-00246-7

Micromixing strategies for efficient mixing processes: a comprehensive review
Delara Soltani, Tim Persoons and Sajad Alimohammadi
J. Micromech. Microeng., 2024, 34, 113001
DOI: 10.1088/1361-6439/ad809a

Optimizing Stereolithography Printing Parameters for Enhanced Microfluidic Chip Quality
Nidal El Biyari and Mohssin Zekriti
Smart and Sustainable Manufacturing Systems, 2024, 8, 136
DOI: 10.1520/SSMS20240013

Assessing ultrasonic and optical flow velocimetry in a millifluidic device using oil-in-water emulsions as blood mimicking fluid
Estelle Lu, Williams Flores Cisternas, Héloïse Uhl, Alexandre Chargueraud, Quentin Grimal, Guillaume Renaud, Jean-Gabriel Minonzio and Jacques Fattaccioli
Micro and Nano Engineering, 2025, 27, 100298
DOI: 10.1016/j.mne.2025.100298

Nanofillers in vat photopolymerisation additive manufacturing: mechanical properties of graphene and acrylate-based composites
Durratun Nasihah Mohd Shuhairi, Nur Syazwani Abdul Malek, Mohd Ifwat Mohd Ghazali, Nor Diyana Md Sin, Noor Najmi Bonnia, Kenji Yamada, Nurfarhana Rosman, Nadya Hajar, Hafsa Omar and Noor Asnida Asli
Prog Addit Manuf, 2025, 10, 11319
DOI: 10.1007/s40964-025-01289-w

Rapid Whole-Plate Cell and Tissue Micropatterning Using a Budget 3D Resin Printer
Anamika Singh, Youn Kyoung Cho and Daniel J. Cohen
ACS Omega, 2024, 9, 43808
DOI: 10.1021/acsomega.4c06539

Trans-dentinal cytotoxicity assessment of adhesive systems on sound and caries-affected dentin using a microphysiological artificial pulp chamber system
Larissa Álamo, Vitor de Toledo Stuani, Lígia Espoliar Correa, Camila Correa da Silva Braga de Melo, Igor Paulino Mendes Soares, Caroline Anselmi, Carlos Alberto de Souza Costa, Josimeri Hebling and Diana Gabriela Soares
Dental Materials, 2026
DOI: 10.1016/j.dental.2026.03.162

Wearable 3D-Printed Microneedle Sensor for Intradermal Temperature Monitoring
Qikun Wei, Daniel Rojas, Qianyu Wang, Ruben Zapata-Pérez, Xing Xuan, Águeda Molinero-Fernández, Gastón A. Crespo and María Cuartero
ACS Sens., 2025, 10, 4027
DOI: 10.1021/acssensors.4c03681

Advances in microfluidics: From state-of-the-art to two-photon polymerization 3D printing perspectives
Vladimir Matining, Camillo Colli, Emanuele Mauri and Davide Moscatelli
Applied Materials Today, 2025, 47, 102953
DOI: 10.1016/j.apmt.2025.102953

A Thorough Review of Emerging Technologies in Micro- and Nanochannel Fabrication: Limitations, Applications, and Comparison
Koosha Karimi, Ali Fardoost, Nikhil Mhatre, Jay Rajan, David Boisvert and Mehdi Javanmard
Micromachines, 2024, 15, 1274
DOI: 10.3390/mi15101274

AnyBio – An easy off-the-shelf masked stereolithography bioprinter conversion combined with radical-scavenging strategies
Maj-Britt Buchholz, Nils Bessler and Anne C. Rios
HardwareX, 2025, 24, e00705
DOI: 10.1016/j.ohx.2025.e00705

Toward a Disruptive “Click-and-Run” 3D Printing Concept for Manufacturing Epidermal Wearable Electrochemical Sensors
Daniel Rojas, María Cuartero and Gastón A. Crespo
ACS Sens., 2025, 10, 7183
DOI: 10.1021/acssensors.5c00682

Body-responsive shape-memory polymers for biomedical applications
Ebrahim Tajik, Nima Reihani, Vahid Karamzadeh, Guosheng Tang and Hossein Ravanbakhsh
Bioactive Materials, 2026, 60, 338
DOI: 10.1016/j.bioactmat.2025.12.054

High‐Performance Polymer‐derived Ceramics in LCD 3D Printing
H. Yazdani Sarvestani, V. Karamzadeh, A. Kulkarni, A. Sohrabi‐Kashani, T. Lacelle, M.B. Jakubinek and B. Ashrafi
Advanced Science, 2025, 12
DOI: 10.1002/advs.202416176

Engineering stimuli‐responsive shape‐morphing through high‐resolution 4D printing
Shuheng Li, Ming Gao, Wenwan Shi, Xiaolu Sun, Yuning Zhou, Lihao Liu, Ji Qiu, Xiaoxiang Gao, Jing Sun, Xiaojiang Liu and Zhongze Gu
Responsive Materials, 2025, 3
DOI: 10.1002/rpm2.70025

A 3D-printed handheld microfluidic device for sensitive and low-cost on-site immunodetection
Fengyun Li, Jiebing Ai, Zhaowei Qu, Jianye Gao, Xiaoqin Ma, Yihuang Chen and Junping Yu
Microchim Acta, 2026, 193
DOI: 10.1007/s00604-025-07744-3

The molecular builders of 3D printing: developing the next generation of safe and efficient visible light photoinitiators
Tong Gao, Jing Zhang, Fabrice Morlet-Savary, Michael Schmitt, Xiaotong Peng, Pu Xiao and Jacques Lalevée
Materials Today, 2026, 96, 103312
DOI: 10.1016/j.mattod.2026.103312

Democratizing Access to Microfluidics: Rapid Prototyping of Open Microchannels with Low-Cost LCD 3D Printers
Kelsey M. Leong, Aileen Y. Sun, Mindy L. Quach, Carrie H. Lin, Cosette A. Craig, Felix Guo, Timothy R. Robinson, Megan M. Chang and Ayokunle O. Olanrewaju
ACS Omega, 2024, 9, 45537
DOI: 10.1021/acsomega.4c07776

An open source platform to automate the design, verification, and manufacture of 3D printed microfluidic devices
Brady Goenner, Scott Temple, Sebastian Zapata, Daniel Wakeham, Ashton Snelgrove, Pierre-Emmanuel Gaillardon, Gregory P. Nordin and Bruce K. Gale
Sci Rep, 2025, 15
DOI: 10.1038/s41598-025-15976-9

3D printing of low-cost, high-resolution open capillary microfluidics towards self-sustaining, long-term hydration of engineered living materials
Aileen Y. Sun, Carrie H. Lin, John A. Tatka, Kinsey Drake, Shannon Daily, Megan Castellanos, Alshakim Nelson and Ayokunle O. Olanrewaju
Prog Addit Manuf, 2025, 10, 7927
DOI: 10.1007/s40964-025-01081-w

Volumetric Additive Manufacturing of Composites via Hydrogel Infusion
Yiming Ji, Enze Su and Daryl W. Yee
ACS Materials Lett., 2025, 7, 2850
DOI: 10.1021/acsmaterialslett.5c00407

Cell culture platform fabrication methods and applications
Yao-Nan Wang, Ko-Tung Chang, Jui-Kai Liu and Chang-Hsien Tai
Tzu Chi Medical Journal, 2026, 38, 21
DOI: 10.4103/tcmj.TCMJ-D-25-00004

In situ 3D polymerization (IS-3DP): Implementing an aqueous two-phase system for the formation of 3D objects inside a microfluidic channel
Guillermo Ramirez-Alvarado, Gabriel Garibaldi, Chiraz Toujani and Gongchen Sun
Biomicrofluidics, 2024, 18
DOI: 10.1063/5.0226620

An open-source slicer for 3D mSLA printing of microfluidic chips
Maria Emmerich, Benjamin Liertz and Robert Wille
Sci Rep, 2025, 15
DOI: 10.1038/s41598-025-32448-2

Poly(ethylene‐glycol)‐Dimethacrylate (PEGDMA) Composite for Stereolithographic Bioprinting
Shu‐Yung Chang, Joseph Zhi Wei Lee, Anupama Sargur Ranganath, Terry Ching and Michinao Hashimoto
Macro Materials & Eng, 2024, 309
DOI: 10.1002/mame.202400143

A Geometry-Driven Modeling Framework for Matrix–Filler Interactions Governing Dielectric Response and Electrical Conductivity in Composite Materials
Kiran Keshyagol, Shivashankarayya Hiremath, H. M. Vishwanatha and Pavan Hiremath
IEEE Access, 2026, 14, 42050
DOI: 10.1109/ACCESS.2026.3673531