Issue 33, 2024

Band and microstructure engineering toward high thermoelectric performance in SnTe

Abstract

SnTe-based compounds have long been considered competitive for thermoelectric power generation. However, their intrinsically high hole concentration due to Sn vacancies and inferior band structure featuring a large energy offset in two valence bands at the band edges largely limits their electrical performance. Meanwhile, the relatively high lattice thermal conductivity of SnTe compared to other IV–VI-based thermoelectrics makes their overall thermoelectric performance enhancement challenging. In this study, we prove that spontaneous optimization in both the carrier concentration and band structure of SnTe can be achieved by alloying a small amount of AgBiS2, thereby yielding a high power factor of 2.25 mW m−1 K−2. It is further elucidated through first-principles calculations that AgBiS2 is a proper choice for band structure engineering compared with other dopants and alloying substances. Moreover, plenty of nano-precipitates and grain boundaries were observed in the SnTe matrix, which led to a reduction in lattice thermal conductivity to an amorphous limit of 0.3 W m−1 K−1, finally resulting in a peak zT of 1.6 at 903 K. This value exceeds most of the values reported for SnTe-based compounds.

Graphical abstract: Band and microstructure engineering toward high thermoelectric performance in SnTe

Supplementary files

Transparent peer review

To support increased transparency, we offer authors the option to publish the peer review history alongside their article.

View this article’s peer review history

Article information

Article type
Paper
Submitted
29 mai 2024
Accepted
12 juil. 2024
First published
16 juil. 2024

J. Mater. Chem. A, 2024,12, 21790-21798

Band and microstructure engineering toward high thermoelectric performance in SnTe

J. Xu, Z. Zhou, K. Zhang, T. Zhao, Y. Wei, B. Zhang, H. Wang, X. Lu and X. Zhou, J. Mater. Chem. A, 2024, 12, 21790 DOI: 10.1039/D4TA03729D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements