Issue 19, 2024

S-doped TiN supported N, P, S-tridoped TiO2 with hetero-phase junctions for fuel cell startup/shutdown durability

Abstract

TiO2 layers codoped with N and P formed on S-doped TiN are recently developed platinum-group metal (PGM)-free catalysts (N, P-TiO2/S-TiN) for the oxygen reduction reaction (ORR) in acidic media. Conventional Pt-based catalysts lack durability as the necessary carbon supports are oxidized at high potentials (>1.0 V) during startup and shutdown. N, P-TiO2/S-TiN catalysts do not require carbon supports and are expected to tolerate oxidation at high potentials. However, N, P-TiO2/S-TiN loses ORR activity during startup or shutdown at potentials >1.0 V due to removal of N- and P-atoms. We therefore report a new pathway to enhance durability and ORR activity of N, P-TiO2/S-TiN. By annealing N, P-TiO2/S-TiN with NH4F under N2, ORR active anatase/rutile TiO2 hetero-phase junctions are produced in bulk with remaining TiN supports, and the surface O-atoms in the TiO2 lattice are substituted by S2−. S-doped TiN-supported N, P, S-tridoped TiO2 exhibits the highest ORR activity among reported oxide/oxynitride catalysts, although the ORR activity of the N, P, S-TiO2/S-TiN catalyst remains lower than that of state-of-the-art carbon-based catalysts. The N, P, S-TiO2/S-TiN catalyst exhibits superior durability among PGM-free catalysts as the anionic dopants are not removed after 5000 potential cycles (1.0–1.5 V), leading to a 0.02 V reduction in half-wave potential.

Graphical abstract: S-doped TiN supported N, P, S-tridoped TiO2 with hetero-phase junctions for fuel cell startup/shutdown durability

Supplementary files

Article information

Article type
Paper
Submitted
03 mars 2024
Accepted
17 avr. 2024
First published
17 avr. 2024

J. Mater. Chem. A, 2024,12, 11277-11285

S-doped TiN supported N, P, S-tridoped TiO2 with hetero-phase junctions for fuel cell startup/shutdown durability

M. Chisaka, J. A. Shamim, W. Hsu and H. Daiguji, J. Mater. Chem. A, 2024, 12, 11277 DOI: 10.1039/D4TA01475H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements